P3-s 1.26@1510

deez · 08-13-02, 12:40 AM

Got my Kingmax PC150 512Mb stick in today and everything seems pretty stable at 1510 so far at default voltage

wish me luck

Celemine1Gig · 08-13-02, 11:14 AM

Hi deez,

good to hear that! Nice overclock on your P3-S. I think 1,6Ghz should be reachable, but perhaps now your mobo is the limiting factor due to too high PCI-bus speeds at 160 MHz FSB+.

Good luck!

Regards

Ingo

LandShark · 08-13-02, 11:38 AM

Quote:

Originally posted by deez
Got my Kingmax PC150 512Mb stick in today and everything seems pretty stable at 1510 so far at default voltage

wish me luck

hey Deez! i think u'll have a good chance to get the fastest PIII rig. title!!

benchmark that baby!!

deez · 08-13-02, 05:39 PM

Celemine1Gig...I think your right about that one...thinking about maybe getting an ST-6 but the funds are low right now

Land Shark...I hope so...I'll be benchmarking it towards the end of the week when I get the memory timings up to speed

deez · 08-14-02, 08:12 PM

working on tweaking the mem timings right now got 159 3-2-2 6/8 right now

DaveB · 08-15-02, 07:34 AM

Good work deez! I just finally got my PIII-S duallie going. Got a couple of PIII-S 1.26 GHz Engineering Samples at another forum and they've been running Prime95 all night at 1.4 GHz. That's at the default core with the FSB at 148 MHz and the DDR at CAS2. The motherboard is an MSI MS-9105RL with onboard RAID and LAN. A really nice board. Right now I can't set the multiplier higher than 9.5 since I'm using the original BIOS. I have to flash the update for the 1.4 GHz PIII-S to activate the 10.5 multipier. Anyway, nice mobo and nice CPUs. BTW, I'm using some copper HS/Fans I picked up at SVCompucycle for $4.99 each.

deez · 08-15-02, 06:24 PM

Nice duallie you've got there DaveB hope the eng. samples and bios flash go well. I also picked up my AX-7 from SVC and I've bought a few other things from them in the past...good store.

I know I could go much higher with this chip on another board with more options but my computer funds are nothing for the next few months (at least) maybe longer.

But I love the performance from my P3-S and think it will serve as a nice solid performer for the next few years.

deez · 08-17-02, 06:01 PM

UPDATE: I decided to go back to 1434 and use my crucial at 151 2-2-2 5/7 since SETI performance was essentially the same due to the slower mem timings with the Kingmax which could run stable at 3-3-2 7/9

and Windows application performance was essentially the same

guess I'm just gonna sell the Kingmax

08-13-02, 12:40 AM	Thread Starter #1
deez Member Join Date: Jul 2001 Location: Austin, TX	P3-s 1.26@1510 Got my Kingmax PC150 512Mb stick in today and everything seems pretty stable at 1510 so far at default voltage wish me luck __________________ heatware: http://heatware.com/eval.php?id=6394
	QUOTE Thanks

08-13-02, 11:14 AM	#2
Celemine1Gig Senior Member Join Date: Dec 2000 Location: Germany->Bavaria-> Augsburg	Hi deez, good to hear that! Nice overclock on your P3-S. I think 1,6Ghz should be reachable, but perhaps now your mobo is the limiting factor due to too high PCI-bus speeds at 160 MHz FSB+. Good luck! Regards Ingo __________________ Nothing to be seen here. Just move along people. ;-)
	QUOTE Thanks

08-13-02, 05:39 PM	Thread Starter #4
deez Member Join Date: Jul 2001 Location: Austin, TX	Celemine1Gig...I think your right about that one...thinking about maybe getting an ST-6 but the funds are low right now Land Shark...I hope so...I'll be benchmarking it towards the end of the week when I get the memory timings up to speed __________________ heatware: http://heatware.com/eval.php?id=6394
	QUOTE Thanks

08-14-02, 08:12 PM	Thread Starter #5
deez Member Join Date: Jul 2001 Location: Austin, TX	working on tweaking the mem timings right now got 159 3-2-2 6/8 right now __________________ heatware: http://heatware.com/eval.php?id=6394
	QUOTE Thanks

08-15-02, 07:34 AM	#6
DaveB Senior Member Join Date: Dec 2000 Location: Gainesville, VA	Good work deez! I just finally got my PIII-S duallie going. Got a couple of PIII-S 1.26 GHz Engineering Samples at another forum and they've been running Prime95 all night at 1.4 GHz. That's at the default core with the FSB at 148 MHz and the DDR at CAS2. The motherboard is an MSI MS-9105RL with onboard RAID and LAN. A really nice board. Right now I can't set the multiplier higher than 9.5 since I'm using the original BIOS. I have to flash the update for the 1.4 GHz PIII-S to activate the 10.5 multipier. Anyway, nice mobo and nice CPUs. BTW, I'm using some copper HS/Fans I picked up at SVCompucycle for $4.99 each. __________________ 1. MSI Z87-G41, i5 4670K, 8GB Kingston HyperX DDR3-1600, Kingston HyperX 128GB SATA III SSD, Galaxy GTX 650 TI 2. Xigmatek GIGAS mATX Case, Supermicro X7DCA-L, 2 x L5408 Xeons @ 2.66 GHz, 24GB Crucial DDR2-667 Reg/ECC, Intel 80GB SSD, PowerColor HD 7750 Video 3. Acer AS5750-9422, 15.6", Core i7-2670QM Laptop, 4GB DDR3-1333, HD 3000 Graphic 4. Old Antec Case, Asus PC-DL, 2 x 1.6 LV D1 Xeons @ 3 GHz, 2GB Corsair PC3200 (4x512MB) @ 200 MHz, Chaintech 6800 128MB AGP Video
	QUOTE Thanks

P3-s 1.26@1510

Internet Services

Website Development

Tech Hardware

08-15-02, 06:24 PM	Thread Starter #7
deez Member Join Date: Jul 2001 Location: Austin, TX	Nice duallie you've got there DaveB hope the eng. samples and bios flash go well. I also picked up my AX-7 from SVC and I've bought a few other things from them in the past...good store. I know I could go much higher with this chip on another board with more options but my computer funds are nothing for the next few months (at least) maybe longer. But I love the performance from my P3-S and think it will serve as a nice solid performer for the next few years. __________________ heatware: http://heatware.com/eval.php?id=6394
	QUOTE Thanks

08-17-02, 06:01 PM	Thread Starter #8
deez Member Join Date: Jul 2001 Location: Austin, TX	UPDATE: I decided to go back to 1434 and use my crucial at 151 2-2-2 5/7 since SETI performance was essentially the same due to the slower mem timings with the Kingmax which could run stable at 3-3-2 7/9 and Windows application performance was essentially the same guess I'm just gonna sell the Kingmax __________________ heatware: http://heatware.com/eval.php?id=6394
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search