[SuperMan0234]

How do I know what kind of Samsung DDR ram I have? What on it will tell me?

[flounder43]

Mine doesn't seem to be either, but usually you can tell by the sticker on it:

[JoshuaB]

Sandra mainboard info will give you this as well.

[SuperMan0234]

all is says is cl?
SiSoftware Sandra

Entire System
Manufacturer : VIA Technologies, Inc.
Model : VT8367-8233
Unique ID : FFFFFFFF-FFFFFFFF-FFFFFFFF-FFFFFFFF

System Mainboard
Manufacturer : Pronix (Epox)
MP Support : No
Model : VT8367-8233
BIOS ID : 07/19/2002-VT8367-8233-6A6LVPAJC-00
Chipset : VIA KT266/A Chipset

System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 4
Maximum Installable Memory : 1024MB
Bank0/1 - A0 : DIMM 256MB
Bank2/3 - A1 : Empty
Bank4/5 - A2 : Empty
Bank6/7 - A3 : Empty

System Chipset
Model : VIA Technologies Inc VT8366/A Apollo KT266/A,KT333 CPU to PCI Bridge
Bus(es) : ISA AGP PCI USB SMBus/i2c
Front Side Bus Speed : 2x 173MHz (346MHz data rate)
Max FSB Speed / Max Memory Speed : 2x 133MHz / 2x 166MHz
In Order Queue Depth : 4 req(s)

Chipset Hub Interface
Type : V-Link
Width : 8-bit
Full Duplex : Yes
Multiplier : 1x
Speed : 4x 86MHz (344MHz data rate)
Down / Up In Order Queue Depth : 9 / 9 req(s)

Logical/Chipset Memory Banks
Bank 0 Setting : 256MB DDR-SDRAM 7-1-1-1R 4-1-1-1W 2.0-3-3CL 1CMD
Bank Interleave : 4-way
Speed : 2x 173MHz (346MHz data rate)
Multiplier : 1x
Power Down Mode : No
Fixed Hole Present : No

Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No

Temperature Sensor(s)
Board Temperature : 35.0°C / 95.0°F
CPU Temperature : 54.0°C / 129.2°F td

Cooling Device(s)
Auto Fan Speed Control : No
CPU Fan Speed : 4821rpm

Voltage Sensor(s)
CPU Core Voltage : 1.78V
+3.3V Voltage : 1.55V
+5V Voltage : 4.81V
+12V Voltage : 12.71V
-12V Voltage : 1.79V
-5V Voltage : 0.63V
+5V Standby Voltage : 4.90V
Battery Voltage : 3.01V

AGP Bus
Version : 2.00
Speed : 86MHz
Current Data Transfer Rate : 4x 86MHz (344MHz data rate)
Side Band Enabled : Yes
Fast-Writes Enabled : No
Fast-Writes Support : Yes
Aperture Size : 128MB

PCI Bus(es)
Version : 2.10
No Bridges : 1
PCI Bus 0 : 32-bit PCI (43MHz)
Multiplier : 1/4x

LPC Hub Controller 1
Model : VIA Technologies Inc VT8233 PCI to ISA Bridge
ACPI PM Enabled : Yes
Random Number Generator Enabled : No
Speed Multiplier : 1/4x
Speed : 11MHz
DMA Multiplier : 1/2x
DMA Speed : 6MHz

USB Controller 1
Model : VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,VT82C686A/B USB Controller
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

USB Controller 2
Model : VIA Technologies Inc VT83C572,VT82C586/A/B,VT82C596B,VT82C686A/B USB Controller
Version : 1.10
UHCI Interface : Yes
Channels : 2
Speed : 48MHz
Legacy Emulation Enabled : No

System SMBus Controller 1
Model : VIA VT823x SMBus
Speed : 16kHz

Expansion Slot(s)
PCI (8h) : PCI 32-bit 5V FullLength Available
PCI (9h) : PCI 32-bit 5V FullLength Available
PCI (Ah) : PCI 32-bit 5V FullLength InUse (Creative Labs SB0102 SBLive! 5.1 )
PCI (Bh) : PCI 32-bit 5V FullLength Available
AGP (8h) : AGP 32-bit 5V FullLength InUse (ATI Technologies Radeon DDR)

Port Connector(s)
PRIMARY IDE : None - ATA / None
SECONDARY IDE : None - ATA / None
FDD : 8251 FIFO Compatible - Floppy / None
COM1 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 Compatible - 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP - DB25 pin female / DB25 pin female
Keyboard : Keyboard Port - None / PS/2
PS/2 Mouse - Detected : Mouse Port - PS/2 / PS/2
USB : USB - None / None

Performance Tips
Notice N224 : SMBIOS/DMI information may be inaccurate.
Warning W2541 : FSB exceeds Chipset rated speed. Reduce FSB.
Warning W2521 : AGP bus speed is too high. Reduce FSB speed or FSB/AGP multiplier.
Warning W2520 : PCI bus speed is too high. Reduce FSB speed or FSB/PCI multiplier.
Warning W2526 : ISA/DMA bus speed is too high. Reduce PCI speed or PCI/ISA multiplier.
Tip T2 : For more information about tips, press F1 and scroll to the Tips section.

[flounder43]

On one of my computers, I don't get the info. But on the other, I have information under "Memory Module" maybe it is mobo specific, or depends on the version of Sandra.

*edit, I just checked on my Gigabyte motherboard, it gives the memory module info. On another, ECS system, I don't get that information.

[dxiw]

just look on the sticker on the stick of mem....

[SuperMan0234]

The sticker tells me nothing and so far I have not found a way to tell. Anyone else know a way?