Vrimm Mod For Asus P4t533 32-bit

Ok guys I figured it out the easy way to do the VRIMM MODhttp://www.thenakedreview.com/index.php?p=showarticle&id=82http://www.thenakedreview.com/index.php?p=showarticle&id=82 w/o soldering to the board and it is adjustable to whatever voltage you desire!

I used 2 SMD grabbers and Radio Shack 10K pot (can also use a 47K pot). With a 10K pot you can go to 3V or higher. 10K gives you 2.74V right from the start and 47K gives about 2.62V. Anyway click on the link and you'll find it in the article...Happy mods!

That looks great!

Thanks! I hope it helps folks with keeping the board stable at the higher FSB.

Did the mod help with stability? I have this board and a 1.8a that will do 2.4 at default voltage. Whenever I try to up the vcore to hit 2.5 or above its not stable. I think my chip might do 2.7 or higher but this board might be holding me back.

This mod could help you get that last bit. This isn't permanent. You can always remove it. Up to you.