PEP, FOP, PAL, Thermoengine??????????

oc jason · 04-17-01, 11:03 PM

I want to get the best for the tb1100 ill be getting soon-what is the best in yuou opinion-fop32, 38, pal6035, pep66, thermoengine??? THanks guys-also what is the best HSF i gan get for my slot till i get my mobo/socket 1100?

Colin · 04-18-01, 01:30 AM

I don’t think much of the ThermoEngine. I have a FOP32 and a PEP66. The FOP, properly lapped would be my choice.

04-18-01, 10:49 AM

The fop 32-1 is nice and quiet, the Alpha is a better heatsink, performance and noise levels depends on the fan you choose. Check out
www.CoolerChips.com

Hoot · 04-18-01, 12:11 PM

I own an FOP-32 and it did a great job for my Duron 600 @ 1000, but that was the limit for it. I am currently doing some experiments with the ThermoEngine and I must say that I am very impressed with the design. There are two or three unique design factors in it that are testimony to the engineering forethought that went into it. Still, it like the other, is an HSF designed around the 60mm fan footprint. The FOP, WBK, 6035 and ThermoEngine all perform much better when adapted to an 80mm fan. Any of them is a good choice, when paired with the right fan.

Hoot

Lucky · 04-18-01, 05:13 PM

I would go with wbk-38 i have it on my little celly 566 and i got 1020 out of it at 38 deg full load

04-17-01, 11:03 PM	Thread Starter #1
oc jason Senior Member Join Date: Feb 2001 Location: Fayetteville, AR	PEP, FOP, PAL, Thermoengine?????????? I want to get the best for the tb1100 ill be getting soon-what is the best in yuou opinion-fop32, 38, pal6035, pep66, thermoengine??? THanks guys-also what is the best HSF i gan get for my slot till i get my mobo/socket 1100? __________________ [THE HATEMACHINE] .: p4 3.2c : Abit IC7 : 1.5gb pc3500 : Gf Fx 5950 :. [FAVORITE GIRL] .: AMDxp 3700 : DFI LANPARTY UT nF4 Ultra-D Socket 939 : 2gb pc4000 : Gf 7900gt :. WoW Server: Laughing Skull Faction: Alliance Name: Truex 60 Dwarf Rogue
	QUOTE Thanks

04-18-01, 01:30 AM	#2
Colin Arctic Silver Senior Join Date: Dec 2000 Location: Kalifornia	I don’t think much of the ThermoEngine. I have a FOP32 and a PEP66. The FOP, properly lapped would be my choice. __________________ Knowledge is useless, it’s what you do with it that counts.
	QUOTE Thanks

04-18-01, 10:49 AM	#3
tweak Guest	The fop 32-1 is nice and quiet, the Alpha is a better heatsink, performance and noise levels depends on the fan you choose. Check out www.CoolerChips.com
	QUOTE Thanks

04-18-01, 12:11 PM	#4
Hoot Inactive Moderator Join Date: Feb 2001 Location: Twin Cities	I own an FOP-32 and it did a great job for my Duron 600 @ 1000, but that was the limit for it. I am currently doing some experiments with the ThermoEngine and I must say that I am very impressed with the design. There are two or three unique design factors in it that are testimony to the engineering forethought that went into it. Still, it like the other, is an HSF designed around the 60mm fan footprint. The FOP, WBK, 6035 and ThermoEngine all perform much better when adapted to an 80mm fan. Any of them is a good choice, when paired with the right fan. Hoot __________________ DFI LP UT NF4 Ultra-D 7.04-3 Bios A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore 2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77Vdimm Connect 3D x850xt 620/625(1250) 2x WD 36GB Raptors in Raid0 DIY Jet Impingement WB on CPU / Pipecap WB on GPU Shrouded Camaro Heater Core / Swiftech MCP655 Pump Antec P-160 Tower / Seasonic S12 600W PSU
	QUOTE Thanks

04-18-01, 05:13 PM	#5
Lucky Registered Join Date: Jan 2001	I would go with wbk-38 i have it on my little celly 566 and i got 1020 out of it at 38 deg full load
	QUOTE Thanks

PEP, FOP, PAL, Thermoengine??????????

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search