wow big diff for me between 2-3-3-1 and 2-3-2-1

Emericana · 10-27-02, 09:29 PM

before it was like 2600/2400 w/ 2-3-3-1t and was like 85% effieciency. well i finally decided to void the warrenty of my corsair xms cl2.5 3200 ram and run it w/ 2.97v (warrenty covers up to 2.8v).... while i couldnt get it stable 2-2-2-1t it would do 2-3-2-1t..... now look at it

edit: this is at 183fsb btw

tainice · 10-28-02, 10:34 AM

Wow..i really need to unlock my chip again so i can run it @ high fsb..mine score sucks now.. Nice

CrashOveride · 10-28-02, 04:46 PM

y HDD wont go much hiogher so i dont bother anunlocking as i have never maxed out my proc from FSB... i just run my mem at the most aggresive settings!

tragic_monkey · 10-28-02, 05:34 PM

i wouldn't worry about high volts on ram, corsair have no way of telling what voltage your ram was at i think, plz dont hesitate to correct me

Emericana · 10-28-02, 06:19 PM

crash overide you know about the 1/5 divisor right? just makin sure you are not using the 1/4 divisor at greater than 166mhz

deeppow · 10-29-02, 08:30 AM

Is that the CAS to RAS delay setting?

Generally I would look for a 3 to 4% improvement in performance. (I test using the Prime95 benchmark and take the average of 5 to 10 tests. The actual measurement was a 3.5% improvement when decreasing the delay from 3 to 2.) I tend to see a variation of about 20 in my Sandra results when they're in the 2600 to 2700 range. Have you looked at the variation you get in the measurement from one time to the next?

Emericana · 10-29-02, 07:28 PM

i changed the setting that said precharge to active from 3t to 2t and that is how i got the performance...

totall here are my settings
2
4bank
2
6
3
Enhance memory performance
2t
1t

RangerJoe · 10-29-02, 11:35 PM

i just put it to turbo settings and 1T command..it seems to be pretty fast

Garfield · 10-30-02, 07:56 AM

What is this 1T Command? I think I've heard about it. Memory settings and specs are things that I wish I knew more about. Does anybody have a link to describe in detail and explain all of this? I think there was one good one, but I can't remember or where to find it.

deeppow · 10-30-02, 08:00 AM

You tried the sticky in this memory forum? It is a good start. There are a few others if that doesn't turn the trick for ya.

Garfield · 10-30-02, 02:07 PM

Okay, I'll take a look at them...

10-27-02, 09:29 PM	Thread Starter #1
Emericana Member Join Date: Jan 2002 Location: Boulder CO	wow big diff for me between 2-3-3-1 and 2-3-2-1 before it was like 2600/2400 w/ 2-3-3-1t and was like 85% effieciency. well i finally decided to void the warrenty of my corsair xms cl2.5 3200 ram and run it w/ 2.97v (warrenty covers up to 2.8v).... while i couldnt get it stable 2-2-2-1t it would do 2-3-2-1t..... now look at it edit: this is at 183fsb btw __________________ Barton 2600m AQYHA 0346 XPMW Y @ 2640mhz 1.9v DFI Infinity 2x256 Twinmos BH5 Geforce FX 5900XT
	QUOTE Thanks

10-28-02, 10:34 AM	#2
tainice Member Join Date: Oct 2001 Location: Carbondale, IL	Wow..i really need to unlock my chip again so i can run it @ high fsb..mine score sucks now.. Nice
	QUOTE Thanks

10-28-02, 04:46 PM	#3
CrashOveride Member Join Date: Jun 2002 Location: Beijing, China	y HDD wont go much hiogher so i dont bother anunlocking as i have never maxed out my proc from FSB... i just run my mem at the most aggresive settings! __________________ .................................................. ......................Just too busy with life ...........................................Team.32.Mentor........................................RED.BELT.Ubercloxx0r ..............................You.should.always.keep.an.open.mind.help.can.be.found.in.the.most.unlikly.places. .....AIUHB0252@2300mhz.SP-97~Abit.NF7-S~512.RAM@fast.timings~9700Pro.w/.copper.HSF.~.2.monitors .................................................. ..Windows XP because I have conditions ....Fold.for.[OC]FoldingNinjas!!!....You .would.be.amazed.at.what.a.group.of.intelegent.peo ple.can.overlook ...............................................All.blanket.statments.are.false\|Nothing.is.absoloute. ............................Don't.Let.ThermalTake.Your.Money~\|~Are.You.Into.Th at.Hacky.Stuff? AKA:supaiku .................................................. ........Can.you.find.the.ninja.in.my.avatar?!?!
	QUOTE Thanks

10-28-02, 05:34 PM	#4
tragic_monkey Member Join Date: Sep 2002 Location: London, UK	i wouldn't worry about high volts on ram, corsair have no way of telling what voltage your ram was at i think, plz dont hesitate to correct me
	QUOTE Thanks

10-28-02, 06:19 PM	Thread Starter #5
Emericana Member Join Date: Jan 2002 Location: Boulder CO	crash overide you know about the 1/5 divisor right? just makin sure you are not using the 1/4 divisor at greater than 166mhz __________________ Barton 2600m AQYHA 0346 XPMW Y @ 2640mhz 1.9v DFI Infinity 2x256 Twinmos BH5 Geforce FX 5900XT
	QUOTE Thanks

wow big diff for me between 2-3-3-1 and 2-3-2-1

Internet Services

Website Development

Tech Hardware

10-29-02, 08:30 AM	#6
deeppow Senior Member Join Date: May 2002 Location: Los Alamos, NM	Is that the CAS to RAS delay setting? Generally I would look for a 3 to 4% improvement in performance. (I test using the Prime95 benchmark and take the average of 5 to 10 tests. The actual measurement was a 3.5% improvement when decreasing the delay from 3 to 2.) I tend to see a variation of about 20 in my Sandra results when they're in the 2600 to 2700 range. Have you looked at the variation you get in the measurement from one time to the next? __________________ ASUS P8Z77-V Pro , Intel i7 2600K @4.6Ghz using 1.3V -- Corsair DDR3 1600 (42Gb) 9-9-9-24 -- Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev -- EVGA GTX680,Klipsch Promedia 4.1 -- Intel 510 120G, Crucial M4 120G, Areca RAID 5, 4 80G SATAII HDDs -- Corsair 1050 in Lian-Li PC-V1200 -- Win7 64-bit, Ubuntu 64-bit ASUS Rampage II Extreme @180Mhz , Intel i7 920 D0 @3.6Ghz using 1.3V, Thermalright 120 -- G.Skill DDR3 1600 (32Gb) 8-8-8-21, Win7 64-bit -- Lian-Li PC-V1200
	QUOTE Thanks

10-29-02, 07:28 PM	Thread Starter #7
Emericana Member Join Date: Jan 2002 Location: Boulder CO	i changed the setting that said precharge to active from 3t to 2t and that is how i got the performance... totall here are my settings 2 4bank 2 6 3 Enhance memory performance 2t 1t __________________ Barton 2600m AQYHA 0346 XPMW Y @ 2640mhz 1.9v DFI Infinity 2x256 Twinmos BH5 Geforce FX 5900XT
	QUOTE Thanks

10-29-02, 11:35 PM	#8
RangerJoe All that is Man! Join Date: Nov 2001 Location: Stillwater, Oklahoma	i just put it to turbo settings and 1T command..it seems to be pretty fast __________________ Q6600 @ 2.92ghz --- Asus Striker Extreme Lian Li V2000B---Corsair 620w PSU 8gb DDR2 Patriot (4x2gb)---Samsung Spinpoint T 500gb Thermalright Ultra-120 eXtreme My name is actually Phillip.
	QUOTE Thanks

10-30-02, 07:56 AM	#9
Garfield Member Join Date: Dec 2001 Location: New Jersey	What is this 1T Command? I think I've heard about it. Memory settings and specs are things that I wish I knew more about. Does anybody have a link to describe in detail and explain all of this? I think there was one good one, but I can't remember or where to find it.
	QUOTE Thanks

10-30-02, 08:00 AM	#10
deeppow Senior Member Join Date: May 2002 Location: Los Alamos, NM	You tried the sticky in this memory forum? It is a good start. There are a few others if that doesn't turn the trick for ya. __________________ ASUS P8Z77-V Pro , Intel i7 2600K @4.6Ghz using 1.3V -- Corsair DDR3 1600 (42Gb) 9-9-9-24 -- Iwaki MD-20RLZT -> EK Sup. Univ. -> Chiller -> Resev -- EVGA GTX680,Klipsch Promedia 4.1 -- Intel 510 120G, Crucial M4 120G, Areca RAID 5, 4 80G SATAII HDDs -- Corsair 1050 in Lian-Li PC-V1200 -- Win7 64-bit, Ubuntu 64-bit ASUS Rampage II Extreme @180Mhz , Intel i7 920 D0 @3.6Ghz using 1.3V, Thermalright 120 -- G.Skill DDR3 1600 (32Gb) 8-8-8-21, Win7 64-bit -- Lian-Li PC-V1200
	QUOTE Thanks

10-30-02, 02:07 PM	#11
Garfield Member Join Date: Dec 2001 Location: New Jersey	Okay, I'll take a look at them...
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search