[heezer7]

Hmm i have another pc that was working with setiq gettting and sending wu fine till i finally got ICS working. now it won't connect. i have tried to add it to ICS port settings and stuff but no luck. anyone have any ideas?

[TC]

Could you describe your physical topology a little better, and also how your IP's were setup?

[LandShark]

and be sure to forward the port 5517 (default) to the setiq server's ip too.

[heezer7]

ok here it goes lets see if u can follow this...
External Network
DHCP server
Internet

--> PC1 NIC1
Connects to Full Network
Auto IP 192.168.1.###
Mask 255.255.255.0
ICS Enabled

-> PC1 NIC2
Connects to second PC via Cross-over cable
Set IP 192.168.0.1
Mask 255.255.255.0


-> PC2 NIC1
Auto from ICS of
192.168.0.100 or whatever

internet works great but want the second PC to use the setiqueue server on the pc1 but it won't conect. have tried setting ports and junk it ICS but nothing seems to work.

[LandShark]

if you are using Driver, seems like it's only local LAN traffic, you should be just type in the setiq pc's IP addy & the port into Driver.

but first thing you'll need to know & make sure the IP of the setiq machine tho.

[TC]

So your setiQ server is on PC1? Can you ping PC1 from PC2? I suppose you must since you can get on the net with PC2. You need to enter the IP address of NIC2 in PC1 in seti driver on PC2. If that doesn't work try the IP of NIC1 in PC1.

[heezer7]

yeah i ahve tried both wawys and many others. i do know the nic1 of pc1 because the ip is leased for a really long time. never seen it change. i can ping, file share, internet both PCs. i have no clue what could be messing this up unless there is something i still need to change in ICS.