how is your inline loop set up?

humdinger · 01-23-03, 07:24 AM

Which would yield better results?

Inline Eheim 1250 pump->Dtek Heatercore->DD Maze 2 CPU->DD GF3 VGA

Or something else?

FIZZ3 · 01-23-03, 07:35 AM

Looks good; the coolest water @ the cpu, the vga after that... just fine!

humdinger · 01-23-03, 07:50 AM

Thanks! I've seen some people have a loop like this:

Pump->CPU->Rad->Anything else

and I was wondering why

FIZZ3 · 01-23-03, 07:53 AM

Quote:

Originally posted by humdinger
Thanks! I've seen some people have a loop like this:

Pump->CPU->Rad->Anything else

and I was wondering why

Well it could be for several reasons, and I think differences are small. One reason could be that this way of routing it is advantageous tubing-wise for their case/setup. The drawback of having the pump and then the cpu block is that the pump may add a little heat to the water and this then hits the cpu block. If you were to put more blocks behind the rad, all this extra heat would pass by the cpu in turn as well... even worse.

01-23-03, 07:24 AM	Thread Starter #1
humdinger Member Join Date: Dec 2002	how is your inline loop set up? Which would yield better results? Inline Eheim 1250 pump->Dtek Heatercore->DD Maze 2 CPU->DD GF3 VGA Or something else?
	QUOTE Thanks

01-23-03, 07:35 AM	#2
FIZZ3 Member Join Date: Jun 2002 Location: NL, Europe	Looks good; the coolest water @ the cpu, the vga after that... just fine! __________________ Desktop: Intel C2D E6700 @ 2.67Ghz / TR AXP-140 \| Asus P5W DH Dlx \| Corsair TwinX 4Gb PC6400 CL4 Nvidia 8800 GTS 640Mb / TR HR-03 \| Creative X-Fi 2x WD Raptor 150Gb \| Plextor PX-760SA Lian Li V2000 Plus \| Corsair HX620 Dell 2407WFP \| Logitech Z-5500 Laptop: Sony VAIO Z11 Intel i5-520M \| 4Gb \| Nvidia GT330M \| 2x64Gb RAID-0 SSD \| 13" 1600x900 panel
	QUOTE Thanks

01-23-03, 07:50 AM	Thread Starter #3
humdinger Member Join Date: Dec 2002	Thanks! I've seen some people have a loop like this: Pump->CPU->Rad->Anything else and I was wondering why
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

how is your inline loop set up?

Internet Services

Website Development

Tech Hardware