OK, got 2640mhz out of my XP2100!

maxima88 · 01-28-03, 07:34 AM

Quote:

Originally posted by Yodums
Great job Maxima. You should take the dive for watercooling and perhaps get a bit more You seem to have a great chip since Kunaak got 2.8 GHz stable on his and that's cooled by a Prometeia.

You make many jealous

Yodums

Thanks Yodums. Just got lucky with my chip.
Really considering h2o right now.

Molybdym · 01-28-03, 08:56 AM

Maxima, the nForce2 boards are the talk of all reviewers. Almost every site I've been to loves this chipset, even the non-OC community. I too am waiting on a 8RDA, my 0248's sitting on my desk at the haus, hoping it will infect my P4 rig with its mystique

maxima88 · 01-28-03, 09:07 AM

Thanks moly. I'll do some research on the epox mobo.

EluSiOn · 01-28-03, 09:35 AM

Maxima88,

I am using Epox 8RDA/+, and you won't regret using this mobo. You can hit 200mhz FSB without much problem and also PCI lock just wonderful.

Kunaak,

Higher your FSB and challenge for the top 10 spot 3dmarks 2001se benchmark! The second place now is using AMD 2700 oc to 2885mhz @ FSB 224mhz using ATI 9700pro.

BrainStorm · 01-28-03, 10:41 AM

maxima88 (and Kunnak if you haven't seem my message to you at Xtreme), there is quite a bit of speculation about the importance of the letters/numbers that come after the date code on the chip. I'm trying to check with the highest 2100+ fliers to see what theirs is.

Can you please post yours?

maxima88 · 01-28-03, 11:00 AM

The letters after 0248 are "MPMW".
Let me know what that means.

kentarou · 01-28-03, 12:24 PM

Quote:

Originally posted by Mugen1516
that's some major juice you got pumped into that thing

I've finally settled on 2352Mhz on mine. I was shooting for max FSB and 196 is the best I can do without any 3DMark "glitches" and 12.5 multi makes it unstable at 1.85v (max on my A7N8X). I'm happy anyway.

yo mugen,

I was wondering, did you have to pop the L3 bridge on your CPU or mod your A7N8X in any way in order to unlock the multipliers on your 2100+ B ?

I've been hearing that there is no need to unlock the 2100+ B's since the motherboard already has the multipliers unlocked. Can you confirm this?

Kentarou

BrainStorm · 01-28-03, 12:27 PM

Quote:

Originally posted by maxima88
The letters after 0248 are "MPMW".
Let me know what that means.

maxima88, I don't know what it means, but your letters go against the wisdom at the moment. The supposedly highest clockers are thought to be "VPUW". "MPMW" is a more garden variety designation. Thanks for your input!

tuskenraider · 01-28-03, 12:34 PM

It depends on your motherboard and bios. Some won't go lower than 13, which i have been told is the case with the A7V333(but new beta bios came out to hopefully solve this, x'ing fingers) or u can't go higher than 12.5 on the A7N8X, or something like that. Search threads for what u have and i'm sure u'll find info. Eagerly, waiting my TB's arrival.

maxima88 · 01-28-03, 01:13 PM

Quote:

Originally posted by tuskenraider
It depends on your motherboard and bios. Some won't go lower than 13, which i have been told is the case with the A7V333(but new beta bios came out to hopefully solve this, x'ing fingers) .

I jsut downloaded the 1016 beta bios last night and will be flashing to it later this evening. I'll keep you posted if it unlocks 5x to 12.5x too.

Kunaak · 01-28-03, 02:18 PM

Kunaak,

Higher your FSB and challenge for the top 10 spot 3dmarks 2001se benchmark! The second place now is using AMD 2700 oc to 2885mhz @ FSB 224mhz using ATI 9700pro.

I am working on getting a new R9700 with a newer Mod done to it. my current card is just losing it's ability to OC, regaurdless of the voltages.
in a few weeks I will have some subzero water chilling going on, and a new R9700 pro to volt mod and such, then I will see what I can do, but I don't think I can compete with Oppainter.
that guys just knows too many secrets.
but I would like to inch my way up abit, from the 11th page...

Brainstorm, soon I am gonna volt mod my 8RDA so I will take the CPU out then and post all the info you need.

Maxima, just looked at your Sig, Nice score with that Ti 4200

buckhunter · 01-28-03, 02:22 PM

Quote:

Originally posted by maxima88
I think I may have reached my chip's overclocking limit.

Great job maxima88! You've come a long way since those old ECS touting days. I ordered the same chip from the egg yesterday.

maxima88 · 01-28-03, 03:09 PM

Quote:

Originally posted by buckhunter

Great job maxima88! You've come a long way since those old ECS touting days. I ordered the same chip from the egg yesterday.

Thanks Deerhunter, Let me know what stepping you get. Hope you get my chip's twin.

What have you been up to?

01-28-03, 08:56 AM	#22
Molybdym Member Join Date: Oct 2002 Location: Carrboro, NC	Maxima, the nForce2 boards are the talk of all reviewers. Almost every site I've been to loves this chipset, even the non-OC community. I too am waiting on a 8RDA, my 0248's sitting on my desk at the haus, hoping it will infect my P4 rig with its mystique
	QUOTE Thanks

01-28-03, 09:07 AM	Thread Starter #23
maxima88 Member Join Date: Jan 2002 Location: Delaware	Thanks moly. I'll do some research on the epox mobo. __________________ Athlon II Phenom Deneb II X4 B45 @ 3.906ghz 252X15.5 Asus M4N98TD Evo G.Skill 2x2GB DDR3 1600 Thermaltake 650W PSU 2x9600gt SLI 2x320GB WD SATA 7200rpm Zalman 9500A LED Cooler MOBILE 2500XP BARTON @ 2656mhz 221x12 + ABIT NF7-S 1GB PC3500C2PT Corsair/Antec True Power 480W PSU ASUS GeForce4 Ti4800 128MB 341/741 Thermalright SLK-900 w/ 92mm Tornado
	QUOTE Thanks

01-28-03, 09:35 AM	#24
EluSiOn Member Join Date: Oct 2002 Location: SC, USA	Maxima88, I am using Epox 8RDA/+, and you won't regret using this mobo. You can hit 200mhz FSB without much problem and also PCI lock just wonderful. Kunaak, Higher your FSB and challenge for the top 10 spot 3dmarks 2001se benchmark! The second place now is using AMD 2700 oc to 2885mhz @ FSB 224mhz using ATI 9700pro.
	QUOTE Thanks

01-28-03, 10:41 AM	#25
BrainStorm Member Join Date: May 2001 Location: Plano, TX	Letters/Numbers after Date code... maxima88 (and Kunnak if you haven't seem my message to you at Xtreme), there is quite a bit of speculation about the importance of the letters/numbers that come after the date code on the chip. I'm trying to check with the highest 2100+ fliers to see what theirs is. Can you please post yours?
	QUOTE Thanks

01-28-03, 11:00 AM	Thread Starter #26
maxima88 Member Join Date: Jan 2002 Location: Delaware	The letters after 0248 are "MPMW". Let me know what that means. __________________ Athlon II Phenom Deneb II X4 B45 @ 3.906ghz 252X15.5 Asus M4N98TD Evo G.Skill 2x2GB DDR3 1600 Thermaltake 650W PSU 2x9600gt SLI 2x320GB WD SATA 7200rpm Zalman 9500A LED Cooler MOBILE 2500XP BARTON @ 2656mhz 221x12 + ABIT NF7-S 1GB PC3500C2PT Corsair/Antec True Power 480W PSU ASUS GeForce4 Ti4800 128MB 341/741 Thermalright SLK-900 w/ 92mm Tornado
	QUOTE Thanks

OK, got 2640mhz out of my XP2100!

Internet Services

Website Development

Tech Hardware

01-28-03, 12:34 PM	#29
tuskenraider Senior Member Join Date: Apr 2002 Location: Chicago area	It depends on your motherboard and bios. Some won't go lower than 13, which i have been told is the case with the A7V333(but new beta bios came out to hopefully solve this, x'ing fingers) or u can't go higher than 12.5 on the A7N8X, or something like that. Search threads for what u have and i'm sure u'll find info. Eagerly, waiting my TB's arrival. __________________ Thermaltake V9 BlacX ][ XFX PRO650W ][ Gigabyte X58A-UD3R ][ i7 950@4.2ghz (21x200) Corsair A70 ][ Corsair XMS DDR3-1600 3x2GB ][ Gigabyte GTX660 Ti ][ 90GB OCZ Vertex 2 2TB Hitachi 7K3000 ][ Asus 24B1ST DVD-RW ][ Asus Zonar STX ][ Tannoy 501a heat
	QUOTE Thanks

01-28-03, 02:18 PM	#31
Kunaak Member Join Date: Sep 2002 Location: Juneau Alaska	Kunaak, Higher your FSB and challenge for the top 10 spot 3dmarks 2001se benchmark! The second place now is using AMD 2700 oc to 2885mhz @ FSB 224mhz using ATI 9700pro. I am working on getting a new R9700 with a newer Mod done to it. my current card is just losing it's ability to OC, regaurdless of the voltages. in a few weeks I will have some subzero water chilling going on, and a new R9700 pro to volt mod and such, then I will see what I can do, but I don't think I can compete with Oppainter. that guys just knows too many secrets. but I would like to inch my way up abit, from the 11th page... Brainstorm, soon I am gonna volt mod my 8RDA so I will take the CPU out then and post all the info you need. Maxima, just looked at your Sig, Nice score with that Ti 4200 __________________ when you have nothing to hide, you have nothing to fear.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search