Please can any one help me to OC my XP2200

P

pqft

New Member

Joined

Jan 28, 2003

• Jan 28, 2003

• #1

Dear Frinds
Can any one help me how to OC my Xp 2200 ,I tried several time but i could`t go more than 1900 M
Please help me how to do that ?
My system

CPU:
2200+ Rev B

Asus A7V8X Delux
COOLING:
Arctic cooler copper silent
VIDEO:
ATI ALL IN WONDER RADEON 8500DV 64M
POWER:
ENEMAX 350 Watt True Power

Regards

 

Molybdym

Member

​

Joined

Oct 13, 2002

Location

Carrboro, NC

• Jan 28, 2003

• #2

First off welcome to the forums

Second, what kind of memory do you have, and what are the timings on sed memory.

Third, I've heard the Northbridge of your board get's pretty hot, look into a small (like a 60mm) fan and strap it onto your NB H/S.

Fourth, have you burned in your chip? Stressed it, just to, "loosen it up"

Fifth, check in the AMD Motherboard forum, they could help too

 

I

Insyder

Member

​

Joined

Jan 1, 2003

• Jan 28, 2003

• #3

When you say you cant get past 1900M, what changes are you making? Have you changed the VCORE? Just asking b/c I made some of the same mistakes I'm sure.

 

OP

P

pqft

New Member

Joined

Jan 28, 2003

• Jan 28, 2003

• Thread Starter
• #4

Dear Frind
Thank you very much for your fast replay
Please tell me how to burne in my chip and how to got the max OC

My system information :-

2200+ Rev B
512 Samsung DDR 2700 (333)
Asus A7V8X Delux
HDD
2 Maxtor 80M with promise Fast trak 2000 133 MB
COOLING:
Arctic cooler copper silent + heatsink for northbridge and for memory
VIDEO:
ATI ALL IN WONDER RADEON 8500DV 64M
POWER:
ENEMAX 350 Watt True Power

 

I

Insyder

Member

​

Joined

Jan 1, 2003

• Jan 28, 2003

• #5

I'm not a pro but this is what I have....

I "burned in" with Folding@home from folding.stanford.edu for nearly a month while waiting for my new HSF.

I have a Volcano 7+ and Arctic Silver 3.

As of this morning... I have a 170FSB and 12.5 multiplier at 1.80VCORE.

I also have a 330Watt PSU.

Hope that helps.

 

OP

P

pqft

New Member

Joined

Jan 28, 2003

• Jan 28, 2003

• Thread Starter
• #6

Thank you very much
Vcore 1.8
you mean that you OC your xp2200 up to 2125 M
How did you do that ?
Please give me the link of burne in software
regards

 

Molybdym

Member

​

Joined

Oct 13, 2002

Location

Carrboro, NC

• Jan 28, 2003

• #7

Any kind of stressing software would work:

Prime95 - http://www.mersenne.org/freesoft.htm

SuperPi - http://pw1.netcom.com/~hjsmith/Pi/Super_Pi.html

Stanford's Folding - http://folding.stanford.edu/

I use Prime and run it for at least 1 day, full throttle. THe longer the better.

 

I

Insyder

Member

​

Joined

Jan 1, 2003

• Jan 28, 2003

• #8

Yes I got my 2200 running at 2.12GHZ (or 2125MHZ). I slowly worked my FSB up to 170 then changed the multiplier on my CPU (my motherboard unlocks the chips automatically) to 12.5. But as the frequency gets higher an increase in VCORE is needed...check the technical forum for an explination. So as I increased my speed I just kept bumping up the power.