Notices

Overclockers Forums > Hardware > Motherboards > AMD Motherboards
AMD Motherboards
Forum Jump

L41 component on A7V266

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 02-15-03, 07:32 PM Thread Starter   #1
IceMan3928
Member

 
IceMan3928's Avatar 

Join Date: Mar 2002
Location: Little Rock, AR (AR is Arkansas NOT Arizona!!!)

 
L41 component on A7V266


Well, i recently broke the L41 component while trying to mount a waterblock. (im not to sure what it is, i thought L stood for loop, but i didnt know they used those in motherboards) So, is there anybody out there that knows the type and value of this component so i can get another one and have a go at fixing it? Its located right around the mounting hole closest to the RAM slots and on the bottom of the CPU socket (the side with the ZIF leverf). Thanks.

__________________
Athlon XP 1700+ tbredB 2400MHz @ 2v
1.25GB PC3200
ATI Radeon 9700pro
PNY GeForce 3 Ti-500 has found a new home but is still loved 11014 3DMarks|OC3D
Abit NF7-S
D-Tek TC-4 water cooling
proudly folding for team 32!!!
Avatar made as small as possible to save bandwidth
Member of the рс fan club :p
IceMan3928 is offline   QUOTE Thanks
Overclockers Approved
Which motherboard should you buy? Get the final word here. Check out the latest Overclockers reviews:
ASRock Z77 OC Formula Motherboard Review

ASRock teamed up with overclocker Nick Shih to make a high-end overclocking-based, yet functional for all users, motherboard named the Z77 OC Formula. It appears they have achieved it. Read More.

Get it at NewEgg for $239.99
ASUS Maximus V Formula Motherboard

The Maximus V Formula is part of the ROG (Republic of Gamers) series of motherboards, which in itself brings a high level of expectation. It's a no brainer, Overclockers Approved! Read more.

Get it at NewEgg for $279.99
Old 02-15-03, 07:54 PM   #2
Norrko
Member

 
Norrko's Avatar 

Join Date: Apr 2002
Location: Sweden

 
L stands for coil (in engineering business) and I'm sure it made something valuable on the board... I'm sorry to hear that and I'm even more sorry that I can't help you... Those surface mounted basta..s are so tiny, so tiny... You are good at soldering? Cause you'll need that skill....

Sorry!

/Norrko

__________________
Vapochill Case | Asus A7N8X DLX| XP2400 JIUHB 0315 @ 2.64 GHz | OCZ PC3500EL 2x256Mb Dual channel| GF 4 Ti4200 128Mb | IBM GXP120 80GB | Maxtor DiamondMax 9 80GB FDB| IBM/Hitachi GXP180 | 60GBSamsung DVD SD616 | Pioneer DVR-104 DVD-R/W | TFT 17" Hyundai Q17 Silver| Antec 480W TruePower PSU |
Norrko is offline   QUOTE Thanks
Old 02-15-03, 08:10 PM Thread Starter   #3
IceMan3928
Member

 
IceMan3928's Avatar 

Join Date: Mar 2002
Location: Little Rock, AR (AR is Arkansas NOT Arizona!!!)

 
If i can get the part then i can solder it on, its getting the part that is the problem, I already emailed asus asking this and basically their take on it was "you broke it, its not our fault, so we dont have to help you fix it".

__________________
Athlon XP 1700+ tbredB 2400MHz @ 2v
1.25GB PC3200
ATI Radeon 9700pro
PNY GeForce 3 Ti-500 has found a new home but is still loved 11014 3DMarks|OC3D
Abit NF7-S
D-Tek TC-4 water cooling
proudly folding for team 32!!!
Avatar made as small as possible to save bandwidth
Member of the рс fan club :p
IceMan3928 is offline   QUOTE Thanks
Old 02-17-03, 12:28 PM Thread Starter   #4
IceMan3928
Member

 
IceMan3928's Avatar 

Join Date: Mar 2002
Location: Little Rock, AR (AR is Arkansas NOT Arizona!!!)

 
bump. Id kinda like to get this fixed.

__________________
Athlon XP 1700+ tbredB 2400MHz @ 2v
1.25GB PC3200
ATI Radeon 9700pro
PNY GeForce 3 Ti-500 has found a new home but is still loved 11014 3DMarks|OC3D
Abit NF7-S
D-Tek TC-4 water cooling
proudly folding for team 32!!!
Avatar made as small as possible to save bandwidth
Member of the рс fan club :p
IceMan3928 is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Motherboards > AMD Motherboards
AMD Motherboards
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 05:17 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?