A7N8X Vcore voltmod..?

zett · 02-27-03, 04:02 PM

my cpu may o/c further but my mobo has a max 1.85 volt.
how do i make a vcore voltmod?
Or what can i do..?

JoJoMoJo · 02-27-03, 05:00 PM

Only thing i did different was to use a 50k Variable resistor. With that I am able at any time to twist a dial and go from 1.8-2.2 volts. Works great I soldered my connection instead of using the grabbers by takeing a resistor putting some hot solder on it and touching the appropriate pin, it stuck, clipped the resistor off, than soldered a wire to pin soldered to the leg connected to my VR. Good luck.

http://www.xtremesystems.org/forums/...?threadid=5167

02-27-03, 04:02 PM	Thread Starter #1
zett New Member Join Date: Feb 2003 Location: Turkey	A7N8X Vcore voltmod..? my cpu may o/c further but my mobo has a max 1.85 volt. how do i make a vcore voltmod? Or what can i do..?
	QUOTE Thanks

02-27-03, 05:00 PM	#2
JoJoMoJo Member Join Date: Aug 2001	Only thing i did different was to use a 50k Variable resistor. With that I am able at any time to twist a dial and go from 1.8-2.2 volts. Works great I soldered my connection instead of using the grabbers by takeing a resistor putting some hot solder on it and touching the appropriate pin, it stuck, clipped the resistor off, than soldered a wire to pin soldered to the leg connected to my VR. Good luck. http://www.xtremesystems.org/forums/...?threadid=5167 Last edited by JoJoMoJo; 02-28-03 at 09:53 PM.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

A7N8X Vcore voltmod..?

Internet Services

Website Development

Tech Hardware