- Joined
- Jun 10, 2002
- Location
- Los Angeles
I took out my water cooling system for some cleaning and maintenece and so i installed my trusty old gladiator w/ delta and I tried to boot up my computer and it gets through all the initial windows loading screens but instead of a logon screen I get a BSOD.
It gave me a few pagefile in unpaiged area stuff and then it gave me IRQL not less or equal to or something and since I didn't change any of my hardware I thought this was a little odd. So I booted it up and went into my mobo's bios to check temps and the temps were fine and all the power rails were fine but the 2.5 which was at 3.29?!?! I don't think this is normal... here's my setup, if anyone has advice please toss it out.
Iwill kk266-R
350W Enermax P/S
1.33ghz Athlon
768mb PC133 RAM
2 x 7200RPM WD 20GB in RAID
1 x 5400RPM WD 45GB
Geforce2 GTS
Turtle Beach Santa Cruz Soundcard
Sony DVD-R DRU500A
Kenwood 72x CD
Pioneer 16x DVD
The delta fan isn't plugged into the mobo, it's plugged into a molex. I'm going to put my w/c parts back together asap and see if unplugging the delta helps. In the meantime any suggestions would really be appreciated
It gave me a few pagefile in unpaiged area stuff and then it gave me IRQL not less or equal to or something and since I didn't change any of my hardware I thought this was a little odd. So I booted it up and went into my mobo's bios to check temps and the temps were fine and all the power rails were fine but the 2.5 which was at 3.29?!?! I don't think this is normal... here's my setup, if anyone has advice please toss it out.
Iwill kk266-R
350W Enermax P/S
1.33ghz Athlon
768mb PC133 RAM
2 x 7200RPM WD 20GB in RAID
1 x 5400RPM WD 45GB
Geforce2 GTS
Turtle Beach Santa Cruz Soundcard
Sony DVD-R DRU500A
Kenwood 72x CD
Pioneer 16x DVD
The delta fan isn't plugged into the mobo, it's plugged into a molex. I'm going to put my w/c parts back together asap and see if unplugging the delta helps. In the meantime any suggestions would really be appreciated