overtaken

oppajer · 04-07-03, 05:26 PM

ahhh hate the idea that i'm gonna be overtaken in like a couple days!!! it's nerve wrecking seeing someone slowly creeping up on you even though you're crunching all you can. ::sigh:: should go down one spot within a few days...

Burning Phoenix · 04-07-03, 07:20 PM

I know the feeling thats why i hurried and put together another system.
Cúchulainn if you are reading i held you at nearly a constant overtake date for a week now!

I need to put together a 3rd one soon to gain some speed!

Cúchulainn · 04-07-03, 07:27 PM

I fried the bottom 8rda+ in my sig and so that machine has been out of commission for about a week. Tomorrow my NF7 v2 should arrive and I'll shift the other 8rda+ over to the xp 1600+ rig. I'm still gaining a few each day. Wednesday or so you should start feeling the pressure again

Burning Phoenix · 04-07-03, 07:35 PM

NNOOOOOOOOOOOOOOOOOO!!!!!

Cúchulainn · 04-09-03, 07:12 AM

uh ooh, are you seeing what I'm seeing?

Burning Phoenix · 04-09-03, 07:22 AM

Yeh i got a week to get another system together. But i doubt it since i'm waiting on Canterwood. I'll just have to try to catch you later.

v8vega350 · 04-09-03, 03:25 PM

i just took 1 pc and went from a kt133 chipset that was crunching wu @4.50 hours to a tbred A and kr7a that does them in under 3 hours and my other i got a nf7s and a tbred b and i am working on burning it in now

Cúchulainn · 04-09-03, 03:27 PM

That kr7a workin' out well then?

v8vega350 · 04-10-03, 01:50 AM

oh yeah it runs my old tbred A very well

oh yea i just found an old emachine case for that old kt133 asus board so i might get that going with a duron or something

04-07-03, 05:26 PM	Thread Starter #1
oppajer Member Join Date: Nov 2002 Location: CA	overtaken ahhh hate the idea that i'm gonna be overtaken in like a couple days!!! it's nerve wrecking seeing someone slowly creeping up on you even though you're crunching all you can. ::sigh:: should go down one spot within a few days...
	QUOTE Thanks

04-07-03, 07:20 PM	#2
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	I know the feeling thats why i hurried and put together another system. Cúchulainn if you are reading i held you at nearly a constant overtake date for a week now! I need to put together a 3rd one soon to gain some speed! __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

04-07-03, 07:27 PM	#3
Cúchulainn Member Join Date: Sep 2002 Location: CO	I fried the bottom 8rda+ in my sig and so that machine has been out of commission for about a week. Tomorrow my NF7 v2 should arrive and I'll shift the other 8rda+ over to the xp 1600+ rig. I'm still gaining a few each day. Wednesday or so you should start feeling the pressure again __________________ Heatware
	QUOTE Thanks

04-07-03, 07:35 PM	#4
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	NNOOOOOOOOOOOOOOOOOO!!!!! __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

04-09-03, 07:12 AM	#5
Cúchulainn Member Join Date: Sep 2002 Location: CO	uh ooh, are you seeing what I'm seeing? __________________ Heatware
	QUOTE Thanks

overtaken

Internet Services

Website Development

Tech Hardware

04-09-03, 07:22 AM	#6
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	Yeh i got a week to get another system together. But i doubt it since i'm waiting on Canterwood. I'll just have to try to catch you later. __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

04-09-03, 03:25 PM	#7
v8vega350 Member Join Date: Nov 2002 Location: washington	i just took 1 pc and went from a kt133 chipset that was crunching wu @4.50 hours to a tbred A and kr7a that does them in under 3 hours and my other i got a nf7s and a tbred b and i am working on burning it in now __________________ amd optron 165 @2500 mhz asus a8n32 sli big typhoon cooler 4 300 gig maxtor drives 1 320 gig maxtor 1 500 gig wd ::bang head 4 gig of something good lol 950 watt corsair psu nec 3540a dvd burner klispch pro media 5.1 Nvidia gtx 285 "i know it will go just a little farther"
	QUOTE Thanks

04-09-03, 03:27 PM	#8
Cúchulainn Member Join Date: Sep 2002 Location: CO	That kr7a workin' out well then? __________________ Heatware
	QUOTE Thanks

04-10-03, 01:50 AM	#9
v8vega350 Member Join Date: Nov 2002 Location: washington	oh yeah it runs my old tbred A very well oh yea i just found an old emachine case for that old kt133 asus board so i might get that going with a duron or something __________________ amd optron 165 @2500 mhz asus a8n32 sli big typhoon cooler 4 300 gig maxtor drives 1 320 gig maxtor 1 500 gig wd ::bang head 4 gig of something good lol 950 watt corsair psu nec 3540a dvd burner klispch pro media 5.1 Nvidia gtx 285 "i know it will go just a little farther"
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search