Week 10 1700's have been out for a While just wanted to poll on their oc'ing results.

Boostin14PSI · 04-08-03, 08:43 PM

This isn't some post to find out which one i should get couse i already have one but for others. What is the highest you have seen stable and unstable? What cooling was used?? I have my 0310XPMW up to 1.4 ghz!!!

I'm still waiting for my mobo. It will arrivbe tomorrow then the real fun begins!
Remember Only Week 10's!!!!

altec · 04-08-03, 09:52 PM

all of the DLT3C's are doing well. i have heard of the 0307's hitting 2.6 on air, but i think the 0310's are doin just as good. i hope we get a poll soon too.

ZeroWing29 · 04-08-03, 09:54 PM

Quote:

Originally posted by Boostin14PSI
I have my 0310XPMW up to 1.4 ghz!!!

Wow, shall I call you an underclocking pro now

CSaddict · 04-08-03, 09:59 PM

I can get into window but not really stable at 2313 but can run stable at 2250. I dont have the voltage to get more out of her. I only have access to 1.75 volts. When you think about it, 1470 to 2250 is amazing and I am very happy. A new mobo and better ram and it would go way fast. At that voltage is barely hits 40c.

Seraphic · 04-08-03, 10:00 PM

Quote:

Originally posted by altec
all of the DLT3C's are doing well. i have heard of the 0307's hitting 2.6 on air, but i think the 0310's are doin just as good. i hope we get a poll soon too.

Like to see them run them daily @ 2600mhz on air.

Hot little muthas

Wheelspinner · 04-08-03, 10:19 PM

excuse my ignorance but what is a DLT3C ?

hitechjb1 · 04-08-03, 10:47 PM

Quote:

Originally posted by Wheelspinner
excuse my ignorance but what is a DLT3C ?

DLT3C refers to the AMD CPU TBRED B 1700+ which is rated at 1.5V. The 1700+ comes with both 1.5V and 1.6V. The 1.6V version is coded as DUT3C.

Even though it is rated at lower 1.5V, it consumes more power than the 1.6V silbling, and it can be clocked as good as, if not better than, the other XP 1700+ to XP 3000+ at low voltage.

From the posts, it is not uncommon to see it going to 2.2 GHz - 2.4 GHz (or even higher) using air cooling at under 1.8 V.

Also it is under $80 and is the "hottest" CPU overclockers are looking for now.

Wheelspinner · 04-09-03, 04:45 AM

thanks for clearing that up, when I do upgrade I will be sure to look for this CPU in UK its only £42 but I aint got that yet, lol

My Tbird's days are numbered.

XP1700 yay

Jen · 04-09-03, 09:32 AM

i like to find one that will overclock to 2300mhz with low voltage ......very low cause i am now dealing with room temps of 90 F

ChillPhatCat · 04-09-03, 04:17 PM

2212 MHz - 0310 UPMW needs something that I'm not sure on yet... I'm pretty happy with a 742 MHz Overclock... just a little over 50%... It runs about 41-43 under load @ 1.75V I don't think It would be problematic to run these chips in 90 degree temps... I was able to get 2050 Stable at the stock VCore... and room temp @ stock speed...

modenaf1 · 04-09-03, 05:00 PM

what is the difference between the week 10 XPMW and UPMW?

jonspd · 04-09-03, 05:06 PM

Good ? and I haven't found the answer yet been looking for a while.

petery83 · 04-09-03, 05:47 PM

Quote:

Originally posted by modenaf1
what is the difference between the week 10 XPMW and UPMW?

that very question has been keeping me from buying either for the past 1+ week

Pla · 04-09-03, 06:04 PM

Quote:

Originally posted by petery83

that very question has been keeping me from buying either for the past 1+ week

That's why most sites don't post the stepping codes.
Too much info is not good for sales.

hitechjb1 · 04-09-03, 06:33 PM

Is the stepping code XP.., UP.., WP.. really that important.

I think the most important thing is to make sure it is
- DLT3C instead of DUT3C (i.e. 1.5V instead of 1.6V), and
- it is a Tbred B instead of a Tbred A (from code such as JIUHB, AIUHB)

For 1.5V and Tbred B, I can relate them to something physical that I can understand.

- 1.5V means lower voltage and higher current (from data sheet) and clocks well at low voltage
- TBred B refers to new silicon process than than the TBred A.

The stepping code may mean something, but its meaning is hidden and probabilistic to me.

Unless someone has solid result and statistics to show one stepping is better than the other, I would just go with any of them.

I saw it has been pretty consistent for the Tbred B DLT3C:

1.6V to 2.2 GHz
1.7V to 2.3 GHz
1.8V to 2.4 GHz

Red02TA · 04-09-03, 08:46 PM

I would have to say I have seen quite a few results on many boards about the 0310UPMW's. I have two of them in my possession and they are both dogs, and most of the results I have seen have been similar. I am running watercooling on mine, and they run up to about 2000 at default 1.5V, but die VERY quickly after that. I am pumping 1.85V to one now, and it won't quite run prime95 at stable 2250. It dies after about 5 passes on torture test. The other one tops out at 2185 at 1.9V stable.

I will report back with my final numbers. Using a Koolance with the 200-G waterblock.

The other two steppings may be better, but these are not that great. I have seen a couple of the X's run alright from the 0310 batch, so you may shoot for those. If you can find the 0307's or 0309's, go for them.

I am a little disappointed for sure.

v8vega350 · 04-09-03, 09:47 PM

i just got my wpmw up to 2400 @1.9v not to happy but still burning in

Actraiser · 04-09-03, 09:55 PM

My WPMW week 10 does 2500mhz at 1.825 volts, it's luck of the draw after 2300mhz with these cpu's..

v8vega350 · 04-09-03, 10:00 PM

Quote:

Originally posted by Actraiser
My WPMW week 10 does 2500mhz at 1.825 volts, it's luck of the draw after 2300mhz with these cpu's..

is that after burning in or is this right out of the box

modenaf1 · 04-09-03, 10:25 PM

Quote:

Originally posted by v8vega350
i just got my wpmw up to 2400 @1.9v not to happy but still burning in

NOT TO HAPPY?!?!?!?!?!?

you should be grateful I can only do 1846 with a 2100

I apologize for sounding a bit harsh. That is why im lookin into a 1700 tbred b

04-08-03, 08:43 PM	Thread Starter #1
Boostin14PSI Member Join Date: Mar 2003	Week 10 1700's have been out for a While just wanted to poll on their oc'ing results. This isn't some post to find out which one i should get couse i already have one but for others. What is the highest you have seen stable and unstable? What cooling was used?? I have my 0310XPMW up to 1.4 ghz!!! I'm still waiting for my mobo. It will arrivbe tomorrow then the real fun begins! Remember Only Week 10's!!!!
	QUOTE Thanks

04-08-03, 09:52 PM	#2
altec polka dot ninja Join Date: Dec 2002 Location: Doylestown, PA	all of the DLT3C's are doing well. i have heard of the 0307's hitting 2.6 on air, but i think the 0310's are doin just as good. i hope we get a poll soon too. __________________ The rig was destroyed by a scissor-happy maniac with a grudge :argue: :bang head
	QUOTE Thanks

04-08-03, 09:59 PM	#4
CSaddict Member Join Date: Jun 2001 Location: CT, USA	I can get into window but not really stable at 2313 but can run stable at 2250. I dont have the voltage to get more out of her. I only have access to 1.75 volts. When you think about it, 1470 to 2250 is amazing and I am very happy. A new mobo and better ram and it would go way fast. At that voltage is barely hits 40c.
	QUOTE Thanks

04-08-03, 10:19 PM	#6
Wheelspinner Registered Join Date: Feb 2003 Location: Scotland	excuse my ignorance but what is a DLT3C ? __________________ Asus A7N8X-E Deluxe rev 2.xx AMD Athlon XP 'Barton' 2500+ @ 12.5x170.52 1.5Gb (3x512mb - 2.5,3,3,7) Xpertvision GeForce 7600GS 'sonic' OC 520/1300 Audigy 2 - 6.1 , Creative Inspire 6700 speakers 123Gb Hitachi/IBM ATA100, 120Gb Samsung ATA133, 650Gb Maxtor USB LG CD-RW GCE-8160B Lite-on DVD-RW SOHW-812S Windows XP Sp3
	QUOTE Thanks

04-09-03, 04:45 AM	#8
Wheelspinner Registered Join Date: Feb 2003 Location: Scotland	thanks for clearing that up, when I do upgrade I will be sure to look for this CPU in UK its only £42 but I aint got that yet, lol My Tbird's days are numbered. XP1700 yay __________________ Asus A7N8X-E Deluxe rev 2.xx AMD Athlon XP 'Barton' 2500+ @ 12.5x170.52 1.5Gb (3x512mb - 2.5,3,3,7) Xpertvision GeForce 7600GS 'sonic' OC 520/1300 Audigy 2 - 6.1 , Creative Inspire 6700 speakers 123Gb Hitachi/IBM ATA100, 120Gb Samsung ATA133, 650Gb Maxtor USB LG CD-RW GCE-8160B Lite-on DVD-RW SOHW-812S Windows XP Sp3
	QUOTE Thanks

Week 10 1700's have been out for a While just wanted to poll on their oc'ing results.

Internet Services

Website Development

Tech Hardware

04-09-03, 09:32 AM	#9
Jen Member Join Date: Dec 2000	i like to find one that will overclock to 2300mhz with low voltage ......very low cause i am now dealing with room temps of 90 F
	QUOTE Thanks

04-09-03, 04:17 PM	#10
ChillPhatCat Member Join Date: Sep 2002 Location: Ballston Spa, NY	2212 MHz - 0310 UPMW needs something that I'm not sure on yet... I'm pretty happy with a 742 MHz Overclock... just a little over 50%... It runs about 41-43 under load @ 1.75V I don't think It would be problematic to run these chips in 90 degree temps... I was able to get 2050 Stable at the stock VCore... and room temp @ stock speed...
	QUOTE Thanks

04-09-03, 05:00 PM	#11
modenaf1 Member Join Date: Mar 2003 Location: the terran system	what is the difference between the week 10 XPMW and UPMW?
	QUOTE Thanks

04-09-03, 05:06 PM	#12
jonspd D11 Senior Join Date: Jan 2003 Location: ATL, Ga	Good ? and I haven't found the answer yet been looking for a while. __________________ GD70\PII955@1.4-----------------------------------------------EX58\920@1.3v 17x200\2.2=NB\2k=HT----------------------------------19x200\True@40c\58c 2x1gb@669@7-7-7-18----------------------------------2x2gb@800@7-7-7-21 2405fpw\280's\evga\bfg----------------------------------2005fpw\2x9800gx2 CorsairHX1000\74gbRaptor----------------------------FSP1010\150gbRaptor CreativeX-Fi-Plat\DvD-rw\Win-7---------------------------------DvD-rw\Win-7 3dMark06=17,650-3dMark05=23,908-Aquamark=216k-Wprime32=6.9sc-Sandra=11kmbs My Heat---------------------------Folding@Home@Team32-----------------------My WebSite
	QUOTE Thanks

04-09-03, 06:33 PM	#15
hitechjb1 Senior Member Join Date: Feb 2003	Is the stepping code XP.., UP.., WP.. really that important. I think the most important thing is to make sure it is - DLT3C instead of DUT3C (i.e. 1.5V instead of 1.6V), and - it is a Tbred B instead of a Tbred A (from code such as JIUHB, AIUHB) For 1.5V and Tbred B, I can relate them to something physical that I can understand. - 1.5V means lower voltage and higher current (from data sheet) and clocks well at low voltage - TBred B refers to new silicon process than than the TBred A. The stepping code may mean something, but its meaning is hidden and probabilistic to me. Unless someone has solid result and statistics to show one stepping is better than the other, I would just go with any of them. I saw it has been pretty consistent for the Tbred B DLT3C: 1.6V to 2.2 GHz 1.7V to 2.3 GHz 1.8V to 2.4 GHz __________________ Overclocking sandbox for A64 939 systems with Winchester and beyond A64 CPUs, chipsets, motherboards A64 Overclocking Result Collection Overclocking sandbox: Tbred B DLT3C and beyond - DFI LP UT NF4 Ultra-D, Opteron 165 CCBBE 0610 DPMW 3.00 GHz, highest clock 3.30 GHz, XP-90, G. Skill 4800 2 x 512 MB, X800Pro (Winchester 0447 CBBHD 2.83 GHz 314x9 1.52V) - ABIT NF7-S rev 2.0, Mobile Barton 2600+ IQYHA 0351 MPMW 2.71 GHz (225x12), 18/37 C, 1.89 V, SLK-947U 80mm Tornado (w/ fan control), 512 MB x 2 3500 C2 2-3-2-5, 9500 np -> 9700 np 360/311 - ASUS A7N8X DLX, Tbred B 1700+ 0310 XPMW 2.56 GHz (205x12.5) 1.94 V, max at 2.6 GHz, SLK-800U + TT SFII, 48/40 28/26 C, 512MB 3500 C2 2-3-2-5 (retired) - Intel 8088 4.77 MHz 8bit CPU, 64KB memory, 1 MB HD, 5 1/4" floppy drive, DOS, 200 bps modem, 80x25 char display
	QUOTE Thanks

04-09-03, 08:46 PM	#16
Red02TA Member Join Date: Feb 2003 Location: Dallas, TX	I would have to say I have seen quite a few results on many boards about the 0310UPMW's. I have two of them in my possession and they are both dogs, and most of the results I have seen have been similar. I am running watercooling on mine, and they run up to about 2000 at default 1.5V, but die VERY quickly after that. I am pumping 1.85V to one now, and it won't quite run prime95 at stable 2250. It dies after about 5 passes on torture test. The other one tops out at 2185 at 1.9V stable. I will report back with my final numbers. Using a Koolance with the 200-G waterblock. The other two steppings may be better, but these are not that great. I have seen a couple of the X's run alright from the 0310 batch, so you may shoot for those. If you can find the 0307's or 0309's, go for them. I am a little disappointed for sure.
	QUOTE Thanks

04-09-03, 09:47 PM	#17
v8vega350 Member Join Date: Nov 2002 Location: washington	i just got my wpmw up to 2400 @1.9v not to happy but still burning in __________________ amd optron 165 @2500 mhz asus a8n32 sli big typhoon cooler 4 300 gig maxtor drives 1 320 gig maxtor 1 500 gig wd ::bang head 4 gig of something good lol 950 watt corsair psu nec 3540a dvd burner klispch pro media 5.1 Nvidia gtx 285 "i know it will go just a little farther"
	QUOTE Thanks

04-09-03, 09:55 PM	#18
Actraiser Registered Join Date: Mar 2003 Location: Ontario	My WPMW week 10 does 2500mhz at 1.825 volts, it's luck of the draw after 2300mhz with these cpu's..
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search