Notices

Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

Xp1800 DLT3C JIUHB0310MPMW, is this one as good as the XP1700's?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 04-09-03, 08:47 AM Thread Starter   #1
Wega!
Senior Member


 
Wega!'s Avatar 

Join Date: Jan 2001
Location: Denmark!

10 Year Badge
 
Xp1800 DLT3C JIUHB0310MPMW, is this one as good as the XP1700's?


I just found out I could get this CPU for aroun 70$. Should I get this one, or should I keep looking for a Xp1700?

__________________
You say Lady Gaga, I say Dash Berlin
You say Hannah Montana, I say Orjan Nilsen
You say Owl City, I say Above & Beyond
You say Justin Bieber, I say Armin Van Buuren
You say Taylor Swift, I say Dj TiŽsto

In Trance we trust!

Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.
Wega! is offline   QUOTE Thanks
Old 04-09-03, 09:06 AM   #2
Fever


 
Fever's Avatar 

Join Date: Sep 2002
Location: Montreal, Canada

10 Year Badge
 
It should be just as good, judging from the stepping. I haven't seen very many 1800+ TBred B results, so I can't say for sure. I'd buy it.

__________________
i7 3930K
Big Bang XPower II
4x Reference 7970
32GB @ 2400 MHz
Seasonic 1250w Gold
Corsair H100 P/P
Corsair Obsidian 900D

Folding User Stats

Fold for Team 32, fold for the cure.
Fever is offline Folding Profile Heatware Profile   QUOTE Thanks
Old 04-09-03, 09:17 AM   #3
Rottys-R-Us
Jester

 
Rottys-R-Us's Avatar 

Join Date: Feb 2001
Location: So Cal.USA.

 
I have not seen many post on the 1800's, mainly 1700's & 2100's.

You may want to look around and see post's on it also, as I posted on 3 different steppings for the 1700, that being 1 of them, but. Lastnight.

"Just made up my mind. Thanks guys.

1 x AMD Athlon XP1700+ 1.47GHZ 384K 266 Tbred (TRAY)(JIUHB:0310XPMW) $77.94

Sub-Total: $77.94
Tax: $5.94
UPS GND: $6.53
Total: $84.47

That's what I paid.

But then again it'a all a crap shoot

And also check the CPU database on the front page.
Rottys-R-Us is offline   QUOTE Thanks
Old 04-09-03, 11:08 AM Thread Starter   #4
Wega!
Senior Member


 
Wega!'s Avatar 

Join Date: Jan 2001
Location: Denmark!

10 Year Badge
 
Oki well I bought it. I'm starting out slow with 1575Mhz (9x175Mhz), and will go on from there. At this speed I'm running @32C after 10min of folding. This is with and old Taisol coller and a low RPM fan. When I get my Volcano 11 my temps should drop quite a lot

__________________
You say Lady Gaga, I say Dash Berlin
You say Hannah Montana, I say Orjan Nilsen
You say Owl City, I say Above & Beyond
You say Justin Bieber, I say Armin Van Buuren
You say Taylor Swift, I say Dj TiŽsto

In Trance we trust!

Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.
Wega! is offline   QUOTE Thanks
Old 04-09-03, 11:24 AM   #5
Rottys-R-Us
Jester

 
Rottys-R-Us's Avatar 

Join Date: Feb 2001
Location: So Cal.USA.

 
The 1700 or the 1800 ?
Rottys-R-Us is offline   QUOTE Thanks
Old 04-09-03, 12:08 PM Thread Starter   #6
Wega!
Senior Member


 
Wega!'s Avatar 

Join Date: Jan 2001
Location: Denmark!

10 Year Badge
 
1800. Now after about an hour of folding, my temps are @ 33C on the CPU and 27C on the system.

I'll try going higher soon

__________________
You say Lady Gaga, I say Dash Berlin
You say Hannah Montana, I say Orjan Nilsen
You say Owl City, I say Above & Beyond
You say Justin Bieber, I say Armin Van Buuren
You say Taylor Swift, I say Dj TiŽsto

In Trance we trust!

Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.
Wega! is offline   QUOTE Thanks
Old 04-09-03, 12:22 PM   #7
dropadrop
Member

 
dropadrop's Avatar 

Join Date: Mar 2001
Location: Finland

10 Year Badge
 
The only dlt3c t-bred b 1800 I saw was just as good as these 1700's going around. It did just under 2.7ghz with chilled water.
dropadrop is offline   QUOTE Thanks
Old 04-09-03, 12:47 PM Thread Starter   #8
Wega!
Senior Member


 
Wega!'s Avatar 

Join Date: Jan 2001
Location: Denmark!

10 Year Badge
 
How much voltage can these chips handle? I know I have to keep the temps' down, but is there a limit? I ran my old XP1700 Pally at 2.05V and wouldt go higher even if my temps allowed my to.... Where shoud I stop with this chip?

__________________
You say Lady Gaga, I say Dash Berlin
You say Hannah Montana, I say Orjan Nilsen
You say Owl City, I say Above & Beyond
You say Justin Bieber, I say Armin Van Buuren
You say Taylor Swift, I say Dj TiŽsto

In Trance we trust!

Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.
Wega! is offline   QUOTE Thanks
Old 04-09-03, 12:47 PM   #9
YviE
Member

 
YviE's Avatar 

Join Date: Dec 2002
Location: Belgium & France

 
Are those CPU's factory unlocked?
Mobo's that accept T-Bred A's, will they automatically accept T-Bred B's?
YviE is offline   QUOTE Thanks
Old 04-09-03, 12:48 PM   #10
hitechjb1
Senior Member



Join Date: Feb 2003

 
Quote:
Originally posted by YviE
Are those CPU's factory unlocked?
Mobo's that accept T-Bred A's, will they automatically accept T-Bred B's?
All TBRED B are unlocked. Some MB and bios can access all multipliers, some only upper and some only lower (depends on CPU type).

__________________

Overclocking sandbox for A64 939 systems with Winchester and beyond
A64 CPUs, chipsets, motherboards
A64 Overclocking Result Collection
Overclocking sandbox: Tbred B DLT3C and beyond
- DFI LP UT NF4 Ultra-D, Opteron 165 CCBBE 0610 DPMW 3.00 GHz, highest clock 3.30 GHz, XP-90, G. Skill 4800 2 x 512 MB, X800Pro (Winchester 0447 CBBHD 2.83 GHz 314x9 1.52V)
- ABIT NF7-S rev 2.0, Mobile Barton 2600+ IQYHA 0351 MPMW 2.71 GHz (225x12), 18/37 C, 1.89 V, SLK-947U 80mm Tornado (w/ fan control), 512 MB x 2 3500 C2 2-3-2-5, 9500 np -> 9700 np 360/311
- ASUS A7N8X DLX, Tbred B 1700+ 0310 XPMW 2.56 GHz (205x12.5) 1.94 V, max at 2.6 GHz, SLK-800U + TT SFII, 48/40 28/26 C, 512MB 3500 C2 2-3-2-5 (retired)
- Intel 8088 4.77 MHz 8bit CPU, 64KB memory, 1 MB HD, 5 1/4" floppy drive, DOS, 200 bps modem, 80x25 char display
hitechjb1 is offline   QUOTE Thanks
Old 04-09-03, 12:51 PM   #11
hitechjb1
Senior Member



Join Date: Feb 2003

 
Quote:
Originally posted by Wega!
How much voltage can these chips handle? I know I have to keep the temps' down, but is there a limit? I ran my old XP1700 Pally at 2.05V and wouldt go higher even if my temps allowed my to.... Where shoud I stop with this chip?
From what I saw in some posts, with air cooling, most Tbred B DLT3C can take

1.6V to 2.2 GHz
1.7V to 2.3 GHz
1.8V to 2.4 GHz

__________________

Overclocking sandbox for A64 939 systems with Winchester and beyond
A64 CPUs, chipsets, motherboards
A64 Overclocking Result Collection
Overclocking sandbox: Tbred B DLT3C and beyond
- DFI LP UT NF4 Ultra-D, Opteron 165 CCBBE 0610 DPMW 3.00 GHz, highest clock 3.30 GHz, XP-90, G. Skill 4800 2 x 512 MB, X800Pro (Winchester 0447 CBBHD 2.83 GHz 314x9 1.52V)
- ABIT NF7-S rev 2.0, Mobile Barton 2600+ IQYHA 0351 MPMW 2.71 GHz (225x12), 18/37 C, 1.89 V, SLK-947U 80mm Tornado (w/ fan control), 512 MB x 2 3500 C2 2-3-2-5, 9500 np -> 9700 np 360/311
- ASUS A7N8X DLX, Tbred B 1700+ 0310 XPMW 2.56 GHz (205x12.5) 1.94 V, max at 2.6 GHz, SLK-800U + TT SFII, 48/40 28/26 C, 512MB 3500 C2 2-3-2-5 (retired)
- Intel 8088 4.77 MHz 8bit CPU, 64KB memory, 1 MB HD, 5 1/4" floppy drive, DOS, 200 bps modem, 80x25 char display
hitechjb1 is offline   QUOTE Thanks
Old 04-09-03, 01:01 PM Thread Starter   #12
Wega!
Senior Member


 
Wega!'s Avatar 

Join Date: Jan 2001
Location: Denmark!

10 Year Badge
 
Quote:
Originally posted by hitechjb1


From what I saw in some posts, with air cooling, most Tbred B DLT3C can take

1.6V to 2.2 GHz
1.7V to 2.3 GHz
1.8V to 2.4 GHz
Oki thanks. Guess I have some room to play wih yet.

__________________
You say Lady Gaga, I say Dash Berlin
You say Hannah Montana, I say Orjan Nilsen
You say Owl City, I say Above & Beyond
You say Justin Bieber, I say Armin Van Buuren
You say Taylor Swift, I say Dj TiŽsto

In Trance we trust!

Benching mayhem: Asus Rampage Extreme, Gigabyte Ep45 UD3P, QX9650, Q9550, E6300, 4x Cedar Mill's, Corsair Dominators 2000Mhz 8-9-8-24, Crucial Ballistix DDR2, Asus GTX480, XFX GTX260, Inno 8800GTX, Zotac 8800GT, Piotres CPU pot, EK Supreme HF, MCW60 Mo-Ra 3 Pro, Ek DC 4.0 and a Corsair TX750
Daily driver: Asus P5Q Pro, Q8400, OCZ PC8000, GTX460, Enzotech Sapphire, EK GTX460 full block, XSPC res/pump and a HWLabs GTX480.
Wega! is offline   QUOTE Thanks
Old 04-10-03, 01:03 AM   #13
YviE
Member

 
YviE's Avatar 

Join Date: Dec 2002
Location: Belgium & France

 
thanx hitechjb1
YviE is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 01:58 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?