2100+ AIUHB date steppings overclock

USAPGAPRO · 04-13-03, 03:14 PM

Im about to upgrade or really downgrade to upgrade and get a 2100+ AIUHB proc, and OC it, in a way that will slaughter my little 2200+.

I have searched various forums to find which date stepping is the best out of the ones the excaliberpc.com carrys, and have been unable to find a definative ansewer and wanted to hear yalls opinion on these.

0247 - they say that this is the best.

0252

0301

0302

Any experience or opinions will be greatly apprieciated.

thanks alot.

jonspd · 04-13-03, 03:17 PM

Read sig (0302)

Nebulous · 04-13-03, 03:32 PM

304 here and luvin it!

Emericana · 04-13-03, 06:19 PM

0301 is considered the worst.... i have one and it does 2200 w/ 1.8v but wont do 2300 under any circumstances

altec · 04-13-03, 06:22 PM

I hear that the 0302's are doing well.

Sephir0th · 04-13-03, 07:49 PM

ive got a 307 but cant try it yet coz im waiting on my new NF7-S 2.0.. if it ever gets here...

one of my mates has a 301 and he can get 2.3 @ 1.85v i think but he cant get 2.4 stable no matter what

altec · 04-13-03, 07:50 PM

i just hit 2.4 with my 1700 on my abit. hope you enjoy yours as much as i am!

radu386 · 05-19-03, 02:31 PM

This is my AIUHB 0301 2100+ at 2330. It's set in the BIOS at 1.8v and 166x14 until I can push the FSB higher.
I've got it running at idle right now to keep the temps, but it does indeed do Prime at this speed. I'm running this on an Abit NF7 (no S, no M) 1.2 with a DDR voltage of either 2.7 or 2.8 (can't remember) and chipset voltage of 1.6. Since I have the ATX12v plug in, it's definitely pulling a lot off the 12v rail, it's running much lower than usual (usual is 11.92).

I don't keep it at this speed, because it's 45C at idle, I clock it down to 166x13.5=2250, and it's fine at 43C. My cooling on it is a GlobalWin WBK68. I know the WBK68 is wussy for what I have, but I bought it for my 1800 Pally, and I just blew all my computer budget on the motherboard. My next step is to watercool (again) when I buy a new block and pump. I also have a _large_ Comair Rotron 24VDC fan mounted on top of the case, pushing >200 CFM of air through the case, it's usually 16C inside.

X2sandman · 05-19-03, 02:39 PM

my old 2100+ that im selling was a 0250 and could do a little over 2.4ghz. This was on water and at 1.9vcore on a 8rda+

xcelerator · 05-19-03, 02:50 PM

JIUHB 0308 is the worse...........compared to all

elec.tron · 05-19-03, 09:53 PM

AIUHB 0304MPNW-
currently @ 205FSB X 11 multi, vcore 1.85, memory @ 2,3,3,7/3.2V. Hehheh, not sure what idle temp is anymore but load temp is 50c. Ran Prime 95 12 hrs, Memtest 12 hrs (6 errors). If I take the multi any higher, or the memory any lower all h*** breaks loose. Still trying to tweak more mgz out of the processor but seem to be running out of options, don't really want to go above 50c under load (stock speed/voltage load temp 32/4c)
elec.tron

04-13-03, 03:14 PM	Thread Starter #1
USAPGAPRO Member Join Date: Feb 2003 Location: Shreveport, La	2100+ AIUHB date steppings overclock Im about to upgrade or really downgrade to upgrade and get a 2100+ AIUHB proc, and OC it, in a way that will slaughter my little 2200+. I have searched various forums to find which date stepping is the best out of the ones the excaliberpc.com carrys, and have been unable to find a definative ansewer and wanted to hear yalls opinion on these. 0247 - they say that this is the best. 0252 0301 0302 Any experience or opinions will be greatly apprieciated. thanks alot.
	QUOTE Thanks

04-13-03, 03:17 PM	#2
jonspd D11 Senior Join Date: Jan 2003 Location: ATL, Ga	Read sig (0302) __________________ GD70\PII955@1.4-----------------------------------------------EX58\920@1.3v 17x200\2.2=NB\2k=HT----------------------------------19x200\True@40c\58c 2x1gb@669@7-7-7-18----------------------------------2x2gb@800@7-7-7-21 2405fpw\280's\evga\bfg----------------------------------2005fpw\2x9800gx2 CorsairHX1000\74gbRaptor----------------------------FSP1010\150gbRaptor CreativeX-Fi-Plat\DvD-rw\Win-7---------------------------------DvD-rw\Win-7 3dMark06=17,650-3dMark05=23,908-Aquamark=216k-Wprime32=6.9sc-Sandra=11kmbs My Heat---------------------------Folding@Home@Team32-----------------------My WebSite
	QUOTE Thanks

04-13-03, 03:32 PM	#3
Nebulous Señor Senior Member Join Date: Oct 2002 Location: The Empire State	304 here and luvin it! __________________ <MEGA-O> Gigabyte Z77X-UD4H / i5 3570K@ 4.5Ghz 16GB GSKILL Sniper F3-17000CL11D-8GBSR XSPC Rasa Black / RX360 / MCP-655 / MCRes OCZ Vertex III SSD 120GB / 2x Seagates 500GB~Raid-0 XFX Double D FX-787A-CDBC Radeon HD 7870 + H80 Sony AD-7220S / Lite On LH-16A1S SilverStone Zeus ZM1350 1350w CM Cosmos 1000 / Win7 Pro x64 Samsung LN40A550 40" HD TV ** Under TITLE II, SECTION 210.340 it is legal to overclock **
	QUOTE Thanks

04-13-03, 06:19 PM	#4
Emericana Member Join Date: Jan 2002 Location: Boulder CO	0301 is considered the worst.... i have one and it does 2200 w/ 1.8v but wont do 2300 under any circumstances __________________ Barton 2600m AQYHA 0346 XPMW Y @ 2640mhz 1.9v DFI Infinity 2x256 Twinmos BH5 Geforce FX 5900XT
	QUOTE Thanks

04-13-03, 06:22 PM	#5
altec polka dot ninja Join Date: Dec 2002 Location: Doylestown, PA	I hear that the 0302's are doing well. __________________ The rig was destroyed by a scissor-happy maniac with a grudge :argue: :bang head
	QUOTE Thanks

2100+ AIUHB date steppings overclock

Internet Services

Website Development

Tech Hardware

04-13-03, 07:49 PM	#6
Sephir0th New Member Join Date: Apr 2003	ive got a 307 but cant try it yet coz im waiting on my new NF7-S 2.0.. if it ever gets here... one of my mates has a 301 and he can get 2.3 @ 1.85v i think but he cant get 2.4 stable no matter what
	QUOTE Thanks

04-13-03, 07:50 PM	#7
altec polka dot ninja Join Date: Dec 2002 Location: Doylestown, PA	i just hit 2.4 with my 1700 on my abit. hope you enjoy yours as much as i am! __________________ The rig was destroyed by a scissor-happy maniac with a grudge :argue: :bang head
	QUOTE Thanks

05-19-03, 02:31 PM	#8
radu386 Member Join Date: Dec 2002 Location: Ontario, Canada	This is my AIUHB 0301 2100+ at 2330. It's set in the BIOS at 1.8v and 166x14 until I can push the FSB higher. I've got it running at idle right now to keep the temps, but it does indeed do Prime at this speed. I'm running this on an Abit NF7 (no S, no M) 1.2 with a DDR voltage of either 2.7 or 2.8 (can't remember) and chipset voltage of 1.6. Since I have the ATX12v plug in, it's definitely pulling a lot off the 12v rail, it's running much lower than usual (usual is 11.92). I don't keep it at this speed, because it's 45C at idle, I clock it down to 166x13.5=2250, and it's fine at 43C. My cooling on it is a GlobalWin WBK68. I know the WBK68 is wussy for what I have, but I bought it for my 1800 Pally, and I just blew all my computer budget on the motherboard. My next step is to watercool (again) when I buy a new block and pump. I also have a _large_ Comair Rotron 24VDC fan mounted on top of the case, pushing >200 CFM of air through the case, it's usually 16C inside.
	QUOTE Thanks

05-19-03, 02:39 PM	#9
X2sandman Member Join Date: Feb 2002 Location: Melrose, MA	my old 2100+ that im selling was a 0250 and could do a little over 2.4ghz. This was on water and at 1.9vcore on a 8rda+
	QUOTE Thanks

05-19-03, 02:50 PM	#10
xcelerator Member Join Date: Apr 2003 Location: Hawaii	JIUHB 0308 is the worse...........compared to all
	QUOTE Thanks

05-19-03, 09:53 PM	#11
elec.tron Member Join Date: Nov 2002 Location: Shoreline, Washington	AIUHB 0304MPNW- currently @ 205FSB X 11 multi, vcore 1.85, memory @ 2,3,3,7/3.2V. Hehheh, not sure what idle temp is anymore but load temp is 50c. Ran Prime 95 12 hrs, Memtest 12 hrs (6 errors). If I take the multi any higher, or the memory any lower all h*** breaks loose. Still trying to tweak more mgz out of the processor but seem to be running out of options, don't really want to go above 50c under load (stock speed/voltage load temp 32/4c) elec.tron __________________ To Be Determined
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search