[Scant7]

SL6EF Q307A163 Packdate 3/11/03
GigaByte 8SQ800 B0 F5 BIOS
2x256 Corsair XMS (not LL series)

Had some problems at first.. relaxed memory timings and lowered dram clock, so I could OC higher.

Can't post any 3D Benchmarks.. getting a 9700Pro soon.. Bestbuy was out of stock today and same with CircuitCity Using a gf2 pro.. don't want to install drivers.

All results are with memory timings at 2-7-3-3, at 2-6-3-3 I couldn't OC over 148, and at 2-7-2-3 there were also a few problems

Sisoft Sandra CPU Benchmarks

Stock 2400Mhz 6115MIPS 1385/3162MFLOPS
141FSB 6693MIPS 1459/3335MFLOPS
145FSB 6617MIPS 1500/3428MFLOPS
147FSB 6726MIPS 1527/3469MFLOPS
151FSB 6841MIPS 1558/3542MFLOPS
155FSB 7254MIPS 1608/3664MFLOPS
160FSB 2880Mhz 7599MIPS 1654/3781MFLOPS

Memory Benchmarks Buffered

Stock 3231 INT 3232 FLOAT
145FSB 3447 INT 3449 FLOAT
147FSB 3482 INT 3480 FLOAT
151FSB 3615 INT 3612 FLOAT
155FSB 3577 INT 3574 FLOAT
160FSB 3688 INT 3687 FLOAT

PC MARK CPU - MEMORY
Stock 5944 - 6094
141FSB 6193 - 6233
151FSB 6595 - 6436
155FSB 6812 - 6394
160FSB 7027 - 6613

I will post 3Dmark2003 and 2001 results when I get my video card =)

I can probably get more than 160FSB out of this baby.. I'm going to sleep now tho, so I'll try it later

Im running about 29-32 idle and 45-47 when Prime95 is running. Only ran Prime95 for about 15 Mins..

Haven't adjusted vcore or anything else either.. I think once I benchmark 3Dmark.. I'll back off to about 150'ish don't want to go overboard and I have my comp on pretty much 24/7.

[micamica1217]

hi,

what vcore are you using for that cpu.

you may need 1.7v or 1.725v to get that puppy to 3.0ghz

mica

[Scant7]

The vcore is like 1.575 according to EasyTune4...

Overnight I ran Prime95 to see if it was stable at 160... today when I turned on my monitor.. there was no prime95.. so Im guessing it wasn't stable and my computer reboot itself