whats your temp and volts @ 2500mhz

for those of you who manged to get 2500mhz out of your tbred's i was jsut wondering what your temps and vorlts are that got you there i think mine are still a little high

49c loaded @1.95v from winbond@2525 volts are set to 2.06 in bios

omg me too!!

0310upmw 1700+

2525 @ 1.95volts (1.87 when at 100% load)...

temps... 57C's (but it's high on the abit)...

A7N8X-DLX, SK-7 + TT SFII, 3500C2 512 MB 5-3-2-2

TB B 1700+, DLT3C, 0310XPMW

Two operating points:

2.52 GHz (210x12) 1.875V, 50/45/45C load/idle/system (4500 rpm)

2.40 GHz (200x12) 1.650V, 40/36/36 load/idle/system (3200 rpm)

Both Prime95, 3D Mark stable

I prefer to run at 2.4 GHz than 2.52 GHz, since power is 26% less, 10C cooler and lose only 120 MHz (7.8% slower).

mabye i should get rid of this water cooling and go back to air cause my chip wont go any more without more vcore but i dont want the chip to die to soon

shim. just to make it even better my stepping is also 0310 wpmw

Up to now, tabulation:

spmw 0310 0
upmw 0310 1
vpmw 0310 0
wpmw 0310 1
xpmw 0310 1

Will update.

this didnt make it far