- Joined
- Jan 2, 2001
- Location
- Dairyland
FIrst off I wanted to share some of the enjoyment I've got from MY new toy. Well not exactly new, refurb from newegg, and about a month old but anyway.
Here's the heart of the system:
A7n8x DELUXE ver 1.04 fully modded , VCORE 1.90 volts, VDD 1.80 Uber bios 1002a.
256 MB OCZ EL DDR PC3500 VMEM 3.00volts 7-3-3-2
XP1700 dlt3c WPMW 0310
stock NB heatsink and nothing on south bridge.
Water cooled with homemade block, via aqua 1300 and chevy heatercore
On airwith SLK - 800 the best I could get was 2410 at 1.85 volts with the same full load temps. AT 233 x 11.5 it won't finish a sandra bench mark but will run seti but crashes after about a 1 hour to 1.5 hours. Makes windows at 233 x 12 but crashes shortly after seti loads. Still have alot of playing to do and finish NB water block, along with my other project that will put this bad boy hopefully at 233x12.
I wish this bios had fsb setting at 234 and 235 as 236 is just alittle unstable.
Here's the heart of the system:
A7n8x DELUXE ver 1.04 fully modded , VCORE 1.90 volts, VDD 1.80 Uber bios 1002a.
256 MB OCZ EL DDR PC3500 VMEM 3.00volts 7-3-3-2
XP1700 dlt3c WPMW 0310
stock NB heatsink and nothing on south bridge.
Water cooled with homemade block, via aqua 1300 and chevy heatercore
On airwith SLK - 800 the best I could get was 2410 at 1.85 volts with the same full load temps. AT 233 x 11.5 it won't finish a sandra bench mark but will run seti but crashes after about a 1 hour to 1.5 hours. Makes windows at 233 x 12 but crashes shortly after seti loads. Still have alot of playing to do and finish NB water block, along with my other project that will put this bad boy hopefully at 233x12.
I wish this bios had fsb setting at 234 and 235 as 236 is just alittle unstable.