• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

How are my temps. new setup

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

Electraglide

Member
Joined
Apr 1, 2003
Location
Florida
I bought the danger den veirge case. And I added a radio shack 120mm 85cfm fan (a second one to the radiator) a sunnon 80 mm fan in front of the 2 hard drives and 2 panaflow exhaust fans in back. Im running a cpu and gpu water block. AC temp in house is set between 74 in the day and 67 at night. In the day, at idle i run 39c at idle and under full load of prime 95 torture and winmarks 2003 i get up to 43c. At night when ac is cooler. I get between 37-38c at idle and under same load 42c. Sounds right?

a7n8x deluxe, barton 2500@ 2388mhz (2400 just wont stableize) Samsung pc2700 memory 512 x2 slots 1&3 AIW 9700 pro. [email protected] and memory @330.75 with home made ram syncs on memory:rolleyes:

These temps show a 10-12 deg f draop after I added a 2nd fan to the radiator:clap:
 
That is good for a Barton.

You say that you can't get it to go higher, what are you running ?
(Your multi and FSB)
 
barton 2500 @ 12.5 x 191. PC2700 memory, which is probably part of the problem. No mods to board. Ive gotten it to 2450, but its completely unstable. And while 2400 seems stable, it wont run prime95 for anyamount of time. So far @ 2388 I can run prime 95 for 10 hours. I shut it down because i didnt wantr to leave new weater setup running all day while i was at work. With prime 95 running(torture test) I can still get 5250 on winmark2003. All in wonder clocked up also. So far stable at 378mhz gpu x 330.75 memory. That seems to be it for the memory even with ram syncs on it.:burn:
 
Back