Burning Phoenix

TC · 05-28-03, 11:39 PM

Here's the data I promised you on my P4 3.0C. This is fresh stats for two days:

Burning Phoenix · 05-28-03, 11:53 PM

And thats approx. 18 wu's a day with a stock 3.0 or overclocked?

TC · 05-29-03, 12:01 AM

Overclocked to 3500. As I mentioned 17-18 is average for it, 19-20 with high AR's would be a good day. So far I've never seen it do less than 15, and that was a day when it was being used heavily for other programs. In edit - I just did the mem volt mod today and bumped the ram up to 1:1. I was running 234fsb with a 3:2 ratio, but now I'm able to run the ram at full speed - that can only help.

Burning Phoenix · 05-29-03, 12:11 AM

well that going to make me sell off one of my systems main parts and order one of HT chips.
Thanks

texasfit · 05-30-03, 08:43 PM

TC
What program are you using for that information?
I can get information from the SetiSpy Results but that is very compact. I got this in the past 24 hour period on my 2.6C rig but would have to figure averages, etc:

5/29/2003 7:34:10 PM 2.121
5/29/2003 8:40:37 PM 2.751
5/29/2003 10:21:36 PM 2.723
5/29/2003 11:21:30 PM 2.622
5/30/2003 1:04:29 AM 2.692
5/30/2003 2:13:53 AM 2.858
5/30/2003 3:47:12 AM 2.691
5/30/2003 4:57:51 AM 2.725
5/30/2003 5:56:27 AM 2.138
5/30/2003 7:12:11 AM 2.204
5/30/2003 8:41:02 AM 2.724
5/30/2003 9:55:58 AM 2.725
5/30/2003 10:49:39 AM 2.138
5/30/2003 12:39:01 PM 2.715
5/30/2003 1:29:47 PM 2.656
5/30/2003 3:22:26 PM 2.709
5/30/2003 4:08:13 PM 2.634
5/30/2003 5:31:21 PM 2.138
5/30/2003 6:54:02 PM 2.725

edit: deleted bunch to shorten

AZN · 05-30-03, 09:29 PM

how do i check stats like that? i want to know what my rig is doing.

TC · 05-30-03, 09:29 PM

That's taken from my Seti Queue server. It can produce a lot of nice stats including graphs. Here's the overall stats screen from the server.

texasfit · 05-30-03, 09:50 PM

Quote:

Originally posted by AZN
how do i check stats like that? i want to know what my rig is doing.

I got mine from SetiSpy/Results/View Log

Guess I will have to do some research on this Seti Queue Server, since I don't have a clue.

TC · 05-30-03, 10:24 PM

http://www.setiqueue.org/default.asp

texasfit · 05-30-03, 11:00 PM

Quote:

Originally posted by TC
http://www.setiqueue.org/default.asp

OK - very interesting. I downloaded the SetiQueue2.2b and will see about setting all this up Sat or Sun.

Correct me if I am wrong but basically, this is a program that will upload the clients results and download wu's to the queue for my home network. I would need to delete SetiSpy and just use the SetiQueue program.

Thanks again TC for the link.

aftermath · 05-30-03, 11:25 PM

no seti spy can still be used. Im runing a setiqueue server and iv pointed my seti driver at it using the proxy field. But i have noticed that i cant get workunits from setiqueue unles my network is working.
i still use seti spy on my main rig to see how things are going.

TC · 05-30-03, 11:32 PM

Seti Queue can be used with programs such as Spy and Driver. I use Driver on my clients so that I can cache a few units locally in case of a network or server outage. Seti Queue is basically a "middle man" between your systems and Berkeley. It tracks your clients' activity, maintains a cache, etc. I use it mainly for the collective stats of all of my systems - unlike Spy which simply tracks each client individually.

Greg M · 06-01-03, 09:04 AM

I've been running SETIQueue since I've been crunching intensively. It adds so much in statistical info, in addition to cacheing WU's, that I can' t imagine trying to run all of my systems without it. I've got one queue at home, and 2 at work.

LandShark · 06-01-03, 12:49 PM

and here's my Team Public Queue Server for all member to use. http://landshark.myftp.org:5517

texasfit · 06-01-03, 01:17 PM

Quote:

Originally posted by LandShark
and here's my Team Public Queue Server for all member to use. http://landshark.myftp.org:5517

Got my Queue Server up and running on my 3 PC's. Thanks for all the help and pointers. It keeps yelling "Incoming Message", that's good though.

Maybe some day (YEAR) I will have one of those Overclockers Logo's on mine with the Top50 at the bottom like you, TC and several others. Do we have one of these for bottom 50?

Burning Phoenix · 06-01-03, 09:35 PM

TC
By the way i placed an order for a 2.4c , P4C800 and 512 Corsair XMS DDR400.
Hopefully i will get everything this week.

TC · 06-01-03, 10:01 PM

Quote:

Originally posted by Burning Phoenix
TC
By the way i placed an order for a 2.4c , P4C800 and 512 Corsair XMS DDR400.
Hopefully i will get everything this week.

Nice

LandShark · 06-01-03, 11:23 PM

Quote:

Originally posted by Burning Phoenix
TC
By the way i placed an order for a 2.4c , P4C800 and 512 Corsair XMS DDR400.
Hopefully i will get everything this week.

great!!

05-28-03, 11:39 PM	Thread Starter #1
TC Senior Seti Addict Join Date: Jan 2001 Location: Denver, CO	Burning Phoenix Here's the data I promised you on my P4 3.0C. This is fresh stats for two days: __________________ My Heatware
	QUOTE Thanks

05-28-03, 11:53 PM	#2
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	And thats approx. 18 wu's a day with a stock 3.0 or overclocked? __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

05-29-03, 12:01 AM	Thread Starter #3
TC Senior Seti Addict Join Date: Jan 2001 Location: Denver, CO	Overclocked to 3500. As I mentioned 17-18 is average for it, 19-20 with high AR's would be a good day. So far I've never seen it do less than 15, and that was a day when it was being used heavily for other programs. In edit - I just did the mem volt mod today and bumped the ram up to 1:1. I was running 234fsb with a 3:2 ratio, but now I'm able to run the ram at full speed - that can only help. __________________ My Heatware
	QUOTE Thanks

05-29-03, 12:11 AM	#4
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	well that going to make me sell off one of my systems main parts and order one of HT chips. Thanks __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

Burning Phoenix

Internet Services

Website Development

Tech Hardware

05-30-03, 09:29 PM	#6
AZN AznSniper Join Date: Mar 2002	how do i check stats like that? i want to know what my rig is doing. __________________ i7 2700k @ 4.5GHz 1.27v - ASRock Z68 PRO "The only fool bigger than the person who knows it all, is the person who argues with him." Stanislaw Jerszy Lec HEATWARE
	QUOTE Thanks

05-30-03, 09:29 PM	Thread Starter #7
TC Senior Seti Addict Join Date: Jan 2001 Location: Denver, CO	That's taken from my Seti Queue server. It can produce a lot of nice stats including graphs. Here's the overall stats screen from the server. __________________ My Heatware Last edited by TC; 05-30-03 at 09:39 PM.
	QUOTE Thanks

05-30-03, 10:24 PM	Thread Starter #9
TC Senior Seti Addict Join Date: Jan 2001 Location: Denver, CO	http://www.setiqueue.org/default.asp __________________ My Heatware
	QUOTE Thanks

05-30-03, 11:25 PM	#11
aftermath Member Join Date: Jan 2002 Location: The Big Brother Nation	no seti spy can still be used. Im runing a setiqueue server and iv pointed my seti driver at it using the proxy field. But i have noticed that i cant get workunits from setiqueue unles my network is working. i still use seti spy on my main rig to see how things are going. __________________ Folding helps find cures --> fold! team32! visit Team32's folding forum Dont use folding as a stress test! Use this and then FOLD member of F_T_W_L sub team
	QUOTE Thanks

05-30-03, 11:32 PM	Thread Starter #12
TC Senior Seti Addict Join Date: Jan 2001 Location: Denver, CO	Seti Queue can be used with programs such as Spy and Driver. I use Driver on my clients so that I can cache a few units locally in case of a network or server outage. Seti Queue is basically a "middle man" between your systems and Berkeley. It tracks your clients' activity, maintains a cache, etc. I use it mainly for the collective stats of all of my systems - unlike Spy which simply tracks each client individually. __________________ My Heatware
	QUOTE Thanks

06-01-03, 09:04 AM	#13
Greg M Member Join Date: Feb 2002 Location: Highlands Ranch, CO	I've been running SETIQueue since I've been crunching intensively. It adds so much in statistical info, in addition to cacheing WU's, that I can' t imagine trying to run all of my systems without it. I've got one queue at home, and 2 at work.
	QUOTE Thanks

06-01-03, 12:49 PM	#14
LandShark Super Shark Moderator Join Date: Aug 2001 Location: Deep Blue Sea (Maryland)	and here's my Team Public Queue Server for all member to use. http://landshark.myftp.org:5517 __________________ ~~~ Currently Inactive Mode ~~~ Got SOLD? MOVE your own thread! How many GHz of Intel + Nvidia folding power? Dunno! Lost count! \| F@H Vista Sidebar gadget \| F@H Yahoo Widget \| F@H iGoogle gadget \| \| My Heatware \| My New HTPC 3.0: Server/Client setup + Better energy efficiency \|
	QUOTE Thanks

06-01-03, 09:35 PM	#16
Burning Phoenix Member Join Date: Jul 2001 Location: Schenectady NY	TC By the way i placed an order for a 2.4c , P4C800 and 512 Corsair XMS DDR400. Hopefully i will get everything this week. __________________ 3.0c Northwood – ASUS P4C800-E : 512M Corsair XMS DDR400 Dual Xeon 3.2GHZ - ASUS NCCH-DL : 2G Mushkin DDR400 Dual Xeon 2.5ghz quad cores – ASUS DSBF-DE : Mushkin 8GB PC2 6400 : 3x 1TB Seagate
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search