Notices

Overclockers Forums > Hardware > General Hardware
General Hardware Discuss your new build and gather upgrade suggestions. And if your question doesn't fit anywhere else...it goes here.
Forum Jump

photoshop test for your computer...

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 06-05-03, 07:13 PM Thread Starter   #1
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
photoshop test for your computer...


I wanted to see how long it would take for a dual AMD or Xeon to 3d render a 2.2 mb file in photoshop...

if you are interested in seeing on your computer, then my email address is

kbyr6661@itsa.ucsf.edu

email me and i will email you the file and directions...

and let you know how long it took my computers and dual g4 1.25ghz mac's at work...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]

Last edited by dustybyrd; 06-05-03 at 07:58 PM.
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 07:40 PM Thread Starter   #2
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
this is a 2.2 mb file and i can't give it to you without email...

then once you get it you can time how long it takes to 3d render the whole thing...

i will send instructions...of course you will need photoshop to do the test...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 07:44 PM   #3
Amorphus
Member



Join Date: Apr 2003
Location: Central MA

 
how did your dual G4s fare? I'm interested in knowing, as the g4s are pretty powerful chips (hey, macs are powerful machines, just having a massive lack of software and third-party hardware)
Amorphus is offline   QUOTE Thanks
Old 06-05-03, 07:48 PM Thread Starter   #4
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
how did your dual G4s fare? I'm interested in knowing, as the g4s are pretty powerful chips (hey, macs are powerful machines, just having a massive lack of software and third-party hardware)

i want to say but i want a couple of response first before i spill the beans....that way people will hopefully give a more honest assessment if they don't know how fast the other machines are...

but yes, the g4 was pretty good...

email me and i will send the file and directions

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:02 PM   #5
AmigoThree
Member

 
AmigoThree's Avatar 

Join Date: Aug 2002
Location: Gettysburg, PA

 
Dont have time tonight but I definatly wanna see how my Dual 2000+ and my P4 2.7ghz fare up against your G4 (no, im not bashing macs, I am just curious)
AmigoThree is offline   QUOTE Thanks
Old 06-05-03, 08:10 PM Thread Starter   #6
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
Dont have time tonight but I definatly wanna see how my Dual 2000+ and my P4 2.7ghz fare up against your G4 (no, im not bashing macs, I am just curious)

except for possibly downloading the file...the 3d rendering doesn't take that long...less than a minute

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:22 PM Thread Starter   #7
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
we have a result for a 2.4ghz AMD....

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:22 PM   #8
IFMU
The Xtreme Senior Nobody

 
IFMU's Avatar 

Join Date: Jun 2001
Location: Wichita, KS

10 Year Badge
 
Im interested. My username@yahoo.com is the email addy. I wont be able to get to it tonite more then likely. Fresh format and testing etc etc.... but once I get this all goin, Ill post up my results.

__________________
IFMU is offline   QUOTE Thanks
Old 06-05-03, 08:26 PM   #9
Bender
Mysteriously Changing Senior

 
Bender's Avatar 

Join Date: Dec 2000
Location: In Thelemac's Basement Eating the Chickens

10 Year Badge
 
Bender@ProjectSimon.com

I'll probably test it out this weekend. Does version of photoshop matter? I have 6.0.

__________________
Abit IP35-E
Q6600 @ 4GHz or bust
Phase Change Cooling by me
2GB Crucial Ballistix
ATI X1650
Seagate 7200.10 320GB
SilverStone Zeus ST56ZF 560w
Soyo 24" LCD
Bender is offline   QUOTE Thanks
Old 06-05-03, 08:30 PM Thread Starter   #10
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
Im interested. My username@yahoo.com is the email addy. I wont be able to get to it tonite more then likely. Fresh format and testing etc etc.... but once I get this all goin, Ill post up my results.
ok, i sent you it...

and i have some results already that i will post...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:31 PM Thread Starter   #11
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
Bender@ProjectSimon.com

I'll probably test it out this weekend. Does version of photoshop matter? I have 6.0.

i tried versions 5 and 7 and both gave the same results...

4.3 seconds...on a 2.4ghz AMD

my 1.62 p3 single cpu tualatin system took 7.5 seconds...

1.5ghz p4 dell took 17.5 seconds...

dual g4 mac 1.25ghz took 7.5 seconds...

and i don't know about my dual p3 yet...will test tonight...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:43 PM   #12
spldart
Member

 
spldart's Avatar 

Join Date: Mar 2003
Location: Sugar Land, Tx.

 
Smile


thanks

Last edited by spldart; 06-05-03 at 08:56 PM.
spldart is offline   QUOTE Thanks
Old 06-05-03, 08:47 PM   #13
FunkDaMonkMan
Member

 
FunkDaMonkMan's Avatar 

Join Date: Dec 2001

 
funkdamonkman@hotmail.com

i'll oc to 1533mhz to run the test. (dual xp1600's)
FunkDaMonkMan is offline   QUOTE Thanks
Old 06-05-03, 08:52 PM Thread Starter   #14
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
i had trouble sending to IFMU and bender...file got returned...probably you have full mailboxes....the file is 3 mb total

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 08:56 PM   #15
spldart
Member

 
spldart's Avatar 

Join Date: Mar 2003
Location: Sugar Land, Tx.

 
I got the email...Thanks...I'll post my results later.
spldart is offline   QUOTE Thanks
Old 06-05-03, 09:02 PM Thread Starter   #16
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
i have tried to email some of you with the test file...however...it's too big for many of your mail boxes so try this hosted by wiz4rd

http://www.w3t.us/testfile.tif

here are the instructions to render it.........


open the file with photoshop and click on filter>render>3d transform....

then click on the 3d box in the left panel of the black and white
image....and then start with the cursor in the upper left hand corner of
the black and white image that you will see for rendering....then drag the
invisible green box to the lower right hand corner so that all you see is a
small green dot (of the see through green box)....then press OK and time
how long it takes to render it...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 09:08 PM   #17
FunkDaMonkMan
Member

 
FunkDaMonkMan's Avatar 

Join Date: Dec 2001

 
i did it.. but how am i supposed to know exactally how long it took?

:edit:.. i'm guessing about 5 seconds.
FunkDaMonkMan is offline   QUOTE Thanks
Old 06-05-03, 09:10 PM Thread Starter   #18
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
i did it.. but how am i supposed to know exactally how long it took?
you should start timing as soon as you hit OK...then watch the hour glass...when it's gone it's done...

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 09:15 PM Thread Starter   #19
dustybyrd
Senior Member

 
dustybyrd's Avatar 

Join Date: Jan 2003
Location: San Francisco, CA

10 Year Badge
 
Quote:
i did it.. but how am i supposed to know exactally how long it took?

:edit:.. i'm guessing about 5 seconds.

ok, but what is your cpu speed and model?

and version of photoshop?

note results listed earlier in this post too

__________________
  • e6600 L631B047 2.4ghz @ 3.6 Ghz 24/7 (9x400 @ 1.38v, w/ 9700 Zalman, 64C TAT max) on Asus P5W-DH,
    2x 1gb OCZ Platinum Rev 2 @ 800mhz w/ 4,4,4,12,4 timings w/ 2.35v, 2x 74gb Raptors, 3x 320gb WD3200KS, 2x NEC 3500A DVDRW, Floppy, Zip
    2x GECUBE x1600pros , WinFast2000XP PVR, WinTV PVR150, Soundblaster Audigy SE, 2x Dell 1905fp, BenQ FP202W, S-Video TV
    2x Scythe SFF21F 120mm, Sunon 120mm PMB1212PLB2-A Blower on Sunbeam Rheostat, powered by Fortron FX700-GLN in Lian Li v2100b plus
    [for video encoding, ~= to 6.6ghz P-D and 5.3ghz dual core Opteron ]
dustybyrd is offline   QUOTE Thanks
Old 06-05-03, 09:26 PM   #20
spldart
Member

 
spldart's Avatar 

Join Date: Mar 2003
Location: Sugar Land, Tx.

 
Should I post up my results right here and now? Or do you wanna wait?
spldart is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > General Hardware
General Hardware Discuss your new build and gather upgrade suggestions. And if your question doesn't fit anywhere else...it goes here.
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 01:34 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?