Notices

Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Vantec Tornado @7V ????

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 07-28-03, 02:24 PM Thread Starter   #1
snowus
Member

 
snowus's Avatar 

Join Date: Nov 2002
Location: BAY AREA # 1 GIANTS FAN

 
Vantec Tornado @7V ????


If you run a Vantec Tornado with a (Controller/Rheobus/Volt Mod) at 7V is this about what air flow/ noise/fan speed would be?

Voltage@12v

Fan Speed=5700RPM

Air Flow=84.1CFM

Noise=55.2dB(A)

Now if running@ 7V

Voltage@7V

Fan Speed=3300RPM

Air Flow=49cfm

Noise= 32.6 dB(A)


Does anyone know if this sounds about right?

I just did some math dividing and multiplying to get those figures but I have know idea if it can be applied to this ...
Anyone with a controller using a Tornado should be able to verify if that RPM speed is correct at @7V...If the RPM speed is right then maybe the others are similiar:

If this is correct then I would have hard time finding a 80mm fan that would give the same figures @ 12V as the Tornado @7V :
The Tornado would be a great choice if @7V it was (RPM3300/49CFM/Noise/32.6)

If these numbers are correct hell I would run 4 or 5 Tornados on a Contoller @7V if some one can give me a idea that this sounds right:

Any thoughts, ideas, suggestions, or comments if this is not right would be appreciated:

Thanks:Snowus

Last edited by snowus; 07-28-03 at 02:38 PM.
snowus is offline   QUOTE Thanks
Old 07-28-03, 02:35 PM   #2
stan03
Member

 
stan03's Avatar 

Join Date: Mar 2003

 
no you can't do that, you just set up some proportions and set them equal? I don't know numbers, but if you do a search, i think you could find it.
stan03 is offline   QUOTE Thanks
Old 07-28-03, 02:45 PM Thread Starter   #3
snowus
Member

 
snowus's Avatar 

Join Date: Nov 2002
Location: BAY AREA # 1 GIANTS FAN

 
I was just messy around trying to see how I could run a Tornado at a level I could stand:Still would like someone to tell me what RPMs are when running 7V:I am sure there is a reason this will not apply but I dont know what it is thats why I posted the question in hopes of some electronic opinions:

Thanks:Snowus
snowus is offline   QUOTE Thanks
Old 07-28-03, 02:49 PM   #4
PhobMX
Member

 
PhobMX's Avatar 

Join Date: Jun 2002
Location: Toronto, ON, Canada

 
it sounds about right, but the noise the tornado makes at 7v is still a bit too much against other fans like the panaflos, have in mind that the tornado still pushes more air because of its wideness... i myself can stand a little more noise just for that extra CFM, look at my setup

__________________
Intel C2D e8400 @ 1.3625v 445x9=4005MHz 38°I-48ºL /AS5/XIGMATEK HDT-S1283/Blue Yate Loon 120mm - Asus P5Q3 - 4x2GB G.SKILL DDR3 PC10666 CAS 9-9-9-24 @ 1.6v DDR3 890 - Corsair 64GB SSD - nVidia GTX260 896MB @ Stock - SoundBlaster X-Fi XtremeMusic - LG DVDRW Combo - Modded Lian Li PC-7B case - 500W Seasonic S12-500 PSU - 4 x 120mm Blue Yate Loon fans
http://valid.canardpc.com/cache/banner/620734.png
NOT FOLDING and Ethical OverClocker Samsung 22" 2ms n2750w Gaming LCD :cool: "Your eyes will thank you" R.I.P. GeForce3
PhobMX is offline   QUOTE Thanks
Old 07-28-03, 02:54 PM   #5
DipStickTony
Member

 
DipStickTony's Avatar 

Join Date: Oct 2002
Location: Madison Heights, MI

 
on the 8rda+ there is an option to show some details like vcore, fan rpm's ...etc at bootup. When my tornado was at 7v it said the rpms were like 2800-2900. When holding up a known 80mm fan that pushes 32cfm and the torando at the same time....the tornado definitly pushed more air. It didnt feel like a ton of air but definitly more then 32cfm....id guess like 40 cfm.

__________________
Heatware
DipStickTony is offline   QUOTE Thanks
Old 07-28-03, 02:56 PM   #6
jlin453
Member

 
jlin453's Avatar 

Join Date: Sep 2002
Location: Austin, Texas

 
The tornado at 7V was still louder than I preferred.
jlin453 is offline   QUOTE Thanks
Old 07-28-03, 04:01 PM   #7
GameFAQsRolo
Official Cool Guy

 
GameFAQsRolo's Avatar 

Join Date: Jun 2003
Location: Commerce, Los Angeles County, California, USA

 
At 7V I think it's louder than 32dB(a)... more than a little.

__________________

ASRock 939Dual-SATA2| |AMD Athlon 64 3200+ Venice| |2x256 Kingston HyperX PC3500 11 3 2 2T 2.6v| |Sapphire Radeon 9600Pro 128MB| |WD SE 120gig| |BenQ DW1620| |Antec TruePower480 **OUTDATED**


Heatware
GameFAQsRolo is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 09:24 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2013, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?