Notices

Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

athlon 750 @ 900. a cheap cooler?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 05-23-01, 09:40 PM Thread Starter   #1
grafenberg
New Member



Join Date: Mar 2001

 
athlon 750 @ 900. a cheap cooler?


I have decided to build a cheap system to use to learn to overclock, but I donít have a lot of money to spend. Iím buying an athlon 750MHz and my goal is to get it up to about 900MHz with an air-cooled system (fan and heatsink). What size setup should I expect to buy (suggestions please ). I plan to buy one of those cheap ($39) powercolor motherboards so you should have an idea of how small my budget is .

Here is my setup:

PowerColor motherboard
Amd Athlon 750Mhz
512MB RAM

Thank you for any info

-g
grafenberg is offline   QUOTE Thanks
Old 05-23-01, 09:57 PM   #2
Hoot
Inactive Moderator



Join Date: Feb 2001
Location: Twin Cities

 
Here's the best bang for buck I could find. Vantec FCE-62540D w/Delta 38cfm fan. $17 +$4.50 S/H. KD Computers.

Here's a link from a guy who review the Vantec running a Tbird 750 @ 900, just as you intend.

Good Luck

Hoot

__________________
DFI LP UT NF4 Ultra-D 7.04-3 Bios
A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore
2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77Vdimm
Connect 3D x850xt 620/625(1250)
2x WD 36GB Raptors in Raid0
DIY Jet Impingement WB on CPU / Pipecap WB on GPU
Shrouded Camaro Heater Core / Swiftech MCP655 Pump
Antec P-160 Tower / Seasonic S12 600W PSU
Hoot is offline   QUOTE Thanks
Old 05-23-01, 11:21 PM   #3
Aman99
Member



Join Date: Mar 2001

 
Can your $39 motherboard even do multiplier adjustment?

Aaron
Aman99 is offline   QUOTE Thanks
Old 05-23-01, 11:43 PM Thread Starter   #4
grafenberg
New Member



Join Date: Mar 2001

 
ooh! Good question... Anyone care to answer, or suggest another motherboard?
grafenberg is offline   QUOTE Thanks
Old 05-24-01, 12:00 AM   #5
stool
Senior Member

 
stool's Avatar 

Join Date: Dec 2000
Location: Albany, NY

10 Year Badge
 
Another thing to consider. If you don't want to end up frying your CPU, or at least want to have a stable system overclocked, you are better off investing a little extra on the HSF. Cooling for Athlons is not the place to skimp.

__________________
My Heatware
stool is offline   QUOTE Thanks
Old 05-24-01, 07:41 AM   #6
Tachyon
Senior Member



Join Date: Jan 2001
Location: Arkansas

 
Quote:
grafenberg (May 23, 2001 11:43 p.m.):
ooh! Good question... Anyone care to answer, or suggest another motherboard?
If you are lookiing to take a 750 to 900 I recommend an MSI K7T Pro2A. Full of o/c features but it is a KT133 board.
Tachyon is offline   QUOTE Thanks
Old 05-24-01, 11:13 AM Thread Starter   #7
grafenberg
New Member



Join Date: Mar 2001

 
Thank you for the suggestion. The motherboard I planned to buy has Auto ďCPU ratio settingĒ. Does this mean its an overclockable motherboard? The k7t proa board is about $80. I would have gotten the board, cpu, and memory for about $130. This puts it at about $170. You can see the powerColor motherboard here: http://210.66.3.2/web/product_inside.asp?prd_id=PVK7Motherboard

Thanks again,

-g
grafenberg is offline   QUOTE Thanks
Old 05-24-01, 12:34 PM   #8
Shep
Senior Member



Join Date: Dec 2000
Location: Marshall, MO

 
Correct me if I am wrong but isn't the kx 133 chipset for slot-a athlon's, in which case he needs a gfd to overclock.
Shep is offline   QUOTE Thanks
Old 05-24-01, 03:25 PM Thread Starter   #9
grafenberg
New Member



Join Date: Mar 2001

 
Yes. It's a kx 133 chipset slot A mobo.

gfd?
grafenberg is offline   QUOTE Thanks
Old 05-24-01, 10:05 PM   #10
Hoot
Inactive Moderator



Join Date: Feb 2001
Location: Twin Cities

 
Graf, everybody is trying to be polite here, but please don't make your first OC endeavor a miserable one by buying a $39.00 motherboard. Like many hobbies, there is a certain price of admission. That motherboard sounds like a dissapointment waiting to happen. I'm just trying to be honest with you. Check some of the classifieds on the different OC pages and look for something a little better. Regardless of what you wind up going with, we'll be here for you, if and when you need help.

Hoot

__________________
DFI LP UT NF4 Ultra-D 7.04-3 Bios
A64 3700+ San Diego 11x257 (2827 Mhz) @ 1.57Vcore
2x1Gb Crucial Ballistix 7:6 (300 Mhz) 3-3-3-8-1T @ 2.77Vdimm
Connect 3D x850xt 620/625(1250)
2x WD 36GB Raptors in Raid0
DIY Jet Impingement WB on CPU / Pipecap WB on GPU
Shrouded Camaro Heater Core / Swiftech MCP655 Pump
Antec P-160 Tower / Seasonic S12 600W PSU
Hoot is offline   QUOTE Thanks
Old 05-24-01, 10:21 PM   #11
PCZip
New Member



Join Date: May 2001

 
Quote:
grafenberg (May 23, 2001 09:40 p.m.):
I have decided to build a cheap system to use to learn to overclock, but I donít have a lot of money to spend. Iím buying an athlon 750MHz and my goal is to get it up to about 900MHz with an air-cooled system (fan and heatsink). What size setup should I expect to buy (suggestions please ). I plan to buy one of those cheap ($39) powercolor motherboards so you should have an idea of how small my budget is .

Here is my setup:

PowerColor motherboard
Amd Athlon 750Mhz
512MB RAM

Thank you for any info

-g
PCZip is offline   QUOTE Thanks
Old 05-26-01, 10:51 AM   #12
n2
Member

 
n2's Avatar 

Join Date: Mar 2001
Location: NY

10 Year Badge
 
exactly that, a $39 mobo would be fine <maybe> for a stock setup...
but you'll be dissappointed overall.
check pricewatch.com for a barebones system.
compgeeks.com sells a few, and they're a good company.
basics: case, ATX w/300wt psu <a definite>
cdrom 40x, a floppy, kybd + mouse, some spkrs.
in a barebone kit, it'll just be Basic stuff, but it's a cost effective way to get what you need. i notice they had a kit with a S3 Savage4 vid card, and one with a DVD... those are perks worth considering, but read on...

then i'd suggest newegg.com for mobo's. i just bought my iwill there, cheapest price and awesome service.

far as chips go, why a slot? and in prices, why not Duron?
they are harder to cool, but O/C better IMO and cost less.

so i'd say no integrated mobo, find a KT133A chipset.
epox, abit, iwill, gigabyte, or asus are the only mfr's i'd consider personally.
just because i've heard many good things. Tekram was good to my K6-2 also.
next, buy a duron 700, less than $40, better than 750's for some reason
600's even better.. dont ask me why, i'm confused by it too.

now, get a globalwin hsk/fan. fop38 for the $24 seems unbeatable.
Vantec has a good one too, for a bit less... but i believe fop38 beats it.

video cards are cheap for a good one, i recommend a GeForce 32mb AGP
i'm real happy, and it can be O/C'd... onboard video will dissappoint. my vid was $70 but i think they're less now.

for all intents and purposes, 128-256mb PC133 is all you need for RAM.
i've read so much about this, i hafta believe it's true. you can save cash there.

sound, well.. the iwill boards have great onboard... this is the only onboard function i will accept on a rig. i guess if you go this route it'll save some cash.

i suppose if you just want a box, you can go with buying an all-in-one board adding a cpu and be all set, but it won't O/C and if something takes a crap on you.... you cant pull the card out and replace it. so lets say its the video...
well, you're pretty much gonna end up buying all that stuff mentioned above anyhow! my best advice to you, coming from one who is on a seriously low budget also, do it right the first time! don't waste alot or any cash, finding all this out the hard way.
because of reading, and advice from others.. i've never regretted a single purchase. but this could have easily gone the other way. a PCCHIPS combo mobo, proc, and everything all in one package for $80 sounds sweet!!! but think about it... how sweet can it be for that price? theres always a reason why cheap is cheap bro!
good luck to you!

__________________
HeatWare
n2 is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > CPUs > AMD CPUs
AMD CPUs
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 12:57 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?