Notices

Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Equivelant Fans

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 09-28-03, 03:02 PM Thread Starter   #1
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
Equivelant Fans


Are there any fans made by Sunon or Y.S. Tech that are comparable to either the Panaflo 92mm, Panaflo 80mm or TT Smartfan 2?

I haven't found any retailers for Panaflo or TT in Finland, and I won't even mention Papst because of their high prices.

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks
Old 09-28-03, 03:15 PM   #2
archilochus
THE Senior FANMAN

 
archilochus's Avatar 

Join Date: Sep 2003
Location: Houston,TX-USA

 
Cool


I think I saw a review in the Heatsink/revws&tips!!!Review pg.Off of Home Pg.OC.com

__________________
MOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36C / Syst. temp 23C /Ambient 20C (room temp)
F@H TEAM 32 :thup:
archilochus is offline   QUOTE Thanks
Old 09-28-03, 03:18 PM Thread Starter   #3
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
Quote:
Originally posted by archilochus
Heatsink/revws&tips!!!Review pg.Off of Home Pg.OC.com
What? Sorry, but that what you just wrote, is very confusing to be exact.

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks
Old 09-28-03, 03:32 PM   #4
archilochus
THE Senior FANMAN

 
archilochus's Avatar 

Join Date: Sep 2003
Location: Houston,TX-USA

 
Cool


Sorry;bout that.On the home page here there is a section called reviews. I click it and it takes you to an index.Choose Heatsink;reviews& tips;Then choose a article to review.For instance the 1st one is in BOLD RED font;Heat Sink Performance Rankings is some good reading.Also click the diff. links in the articles to check out the info within.Very Educational!!!!!!!!!

__________________
MOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36C / Syst. temp 23C /Ambient 20C (room temp)
F@H TEAM 32 :thup:
archilochus is offline   QUOTE Thanks
Old 09-28-03, 03:35 PM Thread Starter   #5
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
Ooh, you mean the heatsink reviews on the overclockers.com frontpage. I use that, but I'm looking for fans specificly.

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks
Old 09-28-03, 03:44 PM   #6
archilochus
THE Senior FANMAN

 
archilochus's Avatar 

Join Date: Sep 2003
Location: Houston,TX-USA

 
I believe there are some links in that article about some fans too. At least the fans used in the test procedures. Maybe at the bottom of the 1st pg. Also....The index covers a variety of like subjects.

__________________
MOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36C / Syst. temp 23C /Ambient 20C (room temp)
F@H TEAM 32 :thup:
archilochus is offline   QUOTE Thanks
Old 09-28-03, 04:01 PM   #7
drewthomas14
Member

 
drewthomas14's Avatar 

Join Date: Aug 2002
Location: Fort Wayne, IN

 
http://svc.com/convarspeedc.html that's the ystech adjustable.
hope that's what you're looking for.
drew
drewthomas14 is offline   QUOTE Thanks
Old 09-28-03, 04:14 PM Thread Starter   #8
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
I found a Sunon 80mm, 30Cfm, 25db. I think thats close to a Panaflo(volt moded).
Enermax 92mm 24-33db, 33-52Cfm.
Theres a Akasa silver colored 80mm 27.85 dB 32.37 cfm.
Also a Y.S. Tech 92mm 47Cfm, 31db.

Which do you think is the best for cfm yet still having low db? Which one would you advise for a HS fan and which ones for case fans? I want a low noise system, but it doesnt have to be inaudible(I use headphones).I'm looking at these since they are available in Finland.

Edit: Which one is quieter, ball or sleeve bearing?

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks
Old 09-28-03, 04:39 PM   #9
Ffats
Member

 
Ffats's Avatar 

Join Date: Jan 2003
Location: Illinois

 
Sleeve bearings are quieter.

Many people would prefer ball, as when they fail, they don't stop.. just slow down considerably and make a horrendous noise. Sleeve bearings just stop. Just a little FYI, take it as a grain of salt.
Ffats is offline   QUOTE Thanks
Old 09-28-03, 04:49 PM Thread Starter   #10
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
I will notice if a fan fails, so no problem on that, but which one do you think is the best out fo these?

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks
Old 09-29-03, 08:02 AM Thread Starter   #11
Bensa
Member

 
Bensa's Avatar 

Join Date: Jun 2003

 
BUMP
I need some answers as fast as possible, thanks.

__________________
The elephant/Epox verdict:
Many readers have noted that their newly purchased elephants won't properly fit into the AGP slot of the 8KHA motherboards because some capacitors were in the way. Since most elephants don't comply with the AGP 2.0 specification, we recommend that God does a product recall on elephants.
Bensa is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 06:30 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?