- Joined
- Dec 17, 2000
Tried searching and reading up on this, but with no luck.
So basicly what is wrong is my 9x multiplier is no good at any 1/2 decent FSB speed.
Here are my results
Barton 2500+ does 2.4GHz @ 200x12 1
Crosair PC4000 (DDR 500) , can post the RAM @ 265FSB,
ABit NF7-S 2.0 nForce 2, C1 steping
While testing pushing MAX without Volt hack though NB and DDR
NB=1.7V
DDR=2.9V
246 x 9.5 (2.33Ghz) 100% stable... tested all day yesterday
250 x 9.5 System Hlts when mouse shows up on screen (black) 2
250 x 9 No Post
245 x 9 No Post
245 x 8.5/8/7.5/7/5 100% stable, didnt try anything else
260 x 8.5 System Halts before OS load
255 x 8.5 System dir missing 3
250 x 8.5 System Hlts when mouse shows up on screen (black) 2
1 I wouldnt run this speed for long periods of time without water cooling. CPU loads in mid-high 50's.
2 I am 99% sure more Voltage to the North Bridge will let me run @ 250FSB. I get simular problems at a lower FSB with a lower Chipset Voltage
3 Got the same message @ same FSB with a 5x multiplier. I think NB needs more Vcore/cooling
Any comments on this?
My conclusions are that the 9x multiplier are messed up/broken in some way...
Or am i totaly off? Anyone else heard of this? Have a Fix or something i can try?
So basicly what is wrong is my 9x multiplier is no good at any 1/2 decent FSB speed.
Here are my results
Barton 2500+ does 2.4GHz @ 200x12 1
Crosair PC4000 (DDR 500) , can post the RAM @ 265FSB,
ABit NF7-S 2.0 nForce 2, C1 steping
While testing pushing MAX without Volt hack though NB and DDR
NB=1.7V
DDR=2.9V
246 x 9.5 (2.33Ghz) 100% stable... tested all day yesterday
250 x 9.5 System Hlts when mouse shows up on screen (black) 2
250 x 9 No Post
245 x 9 No Post
245 x 8.5/8/7.5/7/5 100% stable, didnt try anything else
260 x 8.5 System Halts before OS load
255 x 8.5 System dir missing 3
250 x 8.5 System Hlts when mouse shows up on screen (black) 2
1 I wouldnt run this speed for long periods of time without water cooling. CPU loads in mid-high 50's.
2 I am 99% sure more Voltage to the North Bridge will let me run @ 250FSB. I get simular problems at a lower FSB with a lower Chipset Voltage
3 Got the same message @ same FSB with a 5x multiplier. I think NB needs more Vcore/cooling
Any comments on this?
My conclusions are that the 9x multiplier are messed up/broken in some way...
Or am i totaly off? Anyone else heard of this? Have a Fix or something i can try?