Newbie Guides?

AwwYouDead · 10-09-03, 10:09 PM

Im sortof new to OC'n. I was wondering where i could look for some in depth guides to overclocking. I got an XP2100+ I would like to push. Any help?

USAPGAPRO · 10-09-03, 10:16 PM

OMG, there is tons of stuff on this website. Check the AMD stickys. Also post what mobo, and ram your using, that will help.

WELCOME TO THE FORUMS.

AwwYouDead · 10-09-03, 10:31 PM

well unfortunatly im running on an 8k7a+ but only till my just orderded Nf7 -s Rev2.0 arives which should be in the next cpl days. Im still limping on some pc2100 mem which im also looking to replace. But board first. then prolly next week im going to grab a matched set of mem looking to get into the gig range.

Im just looking for as much info on how to oc this chip. Im new to hardware oc'n.

c627627 · 10-09-03, 10:37 PM

0. Post questions prior to purchases.

1. Read your mobo manual and this
http://forum.oc-forums.com/vb/showth...hreadid=207088

2. Post ALL your system specs and questions here.

_____________________
2100+ AIUHB 0248 MPMW
256MB Crucial PC2100 + 2x 256MB Kingston (Hynix chip) PC2100 @ 6 3 3 2
[152] FSB x 15 = 2280 MHz @ 1.8 Vcore with memory frequency at 100% [152] @ 2.77 Vdimm
37(min) C to 46(max) C Winter ; 42(min) C to 50(max) C Summer
Epox 8RDA+
Thermalright SK-7 with variable speed 80x25mm YS-Tech FD1281259B-2F
BFG GeForce4 Ti4200 8X 128MB; Antec SX-835II case ; 350W Antec SmartPower SL350
Five 80x25mm Ultra Quiet 18CFM Case Fans (NMB C3110KL-04W-B19)

10-09-03, 10:09 PM	Thread Starter #1
AwwYouDead Registered Join Date: Sep 2003 Location: Texas	Newbie Guides? Im sortof new to OC'n. I was wondering where i could look for some in depth guides to overclocking. I got an XP2100+ I would like to push. Any help?
	QUOTE Thanks

10-09-03, 10:16 PM	#2
USAPGAPRO Member Join Date: Feb 2003 Location: Shreveport, La	OMG, there is tons of stuff on this website. Check the AMD stickys. Also post what mobo, and ram your using, that will help. WELCOME TO THE FORUMS.
	QUOTE Thanks

10-09-03, 10:31 PM	Thread Starter #3
AwwYouDead Registered Join Date: Sep 2003 Location: Texas	well unfortunatly im running on an 8k7a+ but only till my just orderded Nf7 -s Rev2.0 arives which should be in the next cpl days. Im still limping on some pc2100 mem which im also looking to replace. But board first. then prolly next week im going to grab a matched set of mem looking to get into the gig range. Im just looking for as much info on how to oc this chip. Im new to hardware oc'n.
	QUOTE Thanks

10-09-03, 10:37 PM	#4
c627627 Senior Member Join Date: Feb 2002 Location: Kansas	0. Post questions prior to purchases. 1. Read your mobo manual and this http://forum.oc-forums.com/vb/showth...hreadid=207088 2. Post ALL your system specs and questions here. _____________________ 2100+ AIUHB 0248 MPMW 256MB Crucial PC2100 + 2x 256MB Kingston (Hynix chip) PC2100 @ 6 3 3 2 [152] FSB x 15 = 2280 MHz @ 1.8 Vcore with memory frequency at 100% [152] @ 2.77 Vdimm 37(min) C to 46(max) C Winter ; 42(min) C to 50(max) C Summer Epox 8RDA+ Thermalright SK-7 with variable speed 80x25mm YS-Tech FD1281259B-2F BFG GeForce4 Ti4200 8X 128MB; Antec SX-835II case ; 350W Antec SmartPower SL350 Five 80x25mm Ultra Quiet 18CFM Case Fans (NMB C3110KL-04W-B19)
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Newbie Guides?

Internet Services

Website Development

Tech Hardware