fsb oc!

Gabrielsurf · 11-18-03, 04:28 PM

im oveclocking my computer right now im at 176fsb and 6.5 multy
as i go higher with the fsb im oc my mem so if my sys becomes unstable i have to raise the mem core voltage right? since the cpu i way below stock and not ocing it yet.
i only have to raise the v core when i start upping the multy and it becomes unstable right???

am i right??

thanks all !!!

I.M.O.G. · 11-18-03, 04:32 PM

Basically you got it... What are your system specs?

Raising the vcore can help you reach higher FSB's also.

As you hit walls, bumping up the vcore might help you pass them, but make sure your temps are alright and you aren't giving anything too much voltage.

Gabrielsurf · 11-18-03, 06:11 PM

abit nf7-s rev 2.0 2-256mb twni x coarsair pc 3200LL mem
1700tbred b 319. slk-800 u tornado fan with speed control.
9700 pro with Tt giant on it. forton 350w psu w 120mm fan.4 case fans WD 80 gig 8mb. Antec plus view 1000 amg grey case.

im at 176 fsb 6.5 multy 6/6 divider i had to raise the mem core to 2.7v
temps on load running prime 95 with the fan running on the lowest speed is 34c full speed is 31c (talking about the tornado cpu fan)

what do u think??

clash · 11-18-03, 06:15 PM

Nice looking system, it should have much more in it than where you are now. What is your voltage now?

Gabrielsurf · 11-18-03, 06:25 PM

oh no!

iam just testing it will go over 2.4 ghz and at least 210fsb i just started ocing 2 days ago i just running prime to make sure that it is stable at every settings

7keys · 11-18-03, 06:26 PM

Quote:

Originally posted by Gabrielsurf
abit nf7-s rev 2.0
im at 176 fsb 6.5 multy 6/6 divider i had to raise the mem core to 2.7v

what do u think??

divider???

Gabrielsurf · 11-18-03, 07:08 PM

i have it on 6/6 right now is it bad should i go lower it?

I.M.O.G. · 11-19-03, 11:33 AM

6/6=1

I don't think that was what you meant gabriel - did you mean 1/6?

11-18-03, 04:28 PM	Thread Starter #1
Gabrielsurf Disabled Join Date: Nov 2003 Location: California	fsb oc! im oveclocking my computer right now im at 176fsb and 6.5 multy as i go higher with the fsb im oc my mem so if my sys becomes unstable i have to raise the mem core voltage right? since the cpu i way below stock and not ocing it yet. i only have to raise the v core when i start upping the multy and it becomes unstable right??? am i right?? thanks all !!!
	QUOTE Thanks

11-18-03, 04:32 PM	#2
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	Basically you got it... What are your system specs? Raising the vcore can help you reach higher FSB's also. As you hit walls, bumping up the vcore might help you pass them, but make sure your temps are alright and you aren't giving anything too much voltage. __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

11-18-03, 06:11 PM	Thread Starter #3
Gabrielsurf Disabled Join Date: Nov 2003 Location: California	abit nf7-s rev 2.0 2-256mb twni x coarsair pc 3200LL mem 1700tbred b 319. slk-800 u tornado fan with speed control. 9700 pro with Tt giant on it. forton 350w psu w 120mm fan.4 case fans WD 80 gig 8mb. Antec plus view 1000 amg grey case. im at 176 fsb 6.5 multy 6/6 divider i had to raise the mem core to 2.7v temps on load running prime 95 with the fan running on the lowest speed is 34c full speed is 31c (talking about the tornado cpu fan) what do u think??
	QUOTE Thanks

11-18-03, 06:15 PM	#4
clash Premium Member #10 Join Date: Dec 2002 Location: Canyon,Tx.	Nice looking system, it should have much more in it than where you are now. What is your voltage now? __________________ i7 2600k @ 4.5 ASRock Z77 Extreme4 Corsair Vengeance 4x8 Mushkin Chronos 120 XFX 7950 BE 1050/1500 Rosewill Lightning-1000 PSU
	QUOTE Thanks

11-18-03, 06:25 PM	Thread Starter #5
Gabrielsurf Disabled Join Date: Nov 2003 Location: California	oh no! iam just testing it will go over 2.4 ghz and at least 210fsb i just started ocing 2 days ago i just running prime to make sure that it is stable at every settings
	QUOTE Thanks

fsb oc!

Internet Services

Website Development

Tech Hardware

11-18-03, 07:08 PM	Thread Starter #7
Gabrielsurf Disabled Join Date: Nov 2003 Location: California	i have it on 6/6 right now is it bad should i go lower it?
	QUOTE Thanks

11-19-03, 11:33 AM	#8
I.M.O.G. Glorious Leader Join Date: Nov 2002 Location: Rootstown, OH	6/6=1 I don't think that was what you meant gabriel - did you mean 1/6? __________________ The OC Forums Way We are a team. We are a community. We are a fellowship made strong by mutual respect and shared dedication to the task of enriching all who come here. The OC Forums Thank You Thread Put your computer to work for our OC Forum Teams! Try out our POST TEMPLATES, they save you time answering common questions! I spend half my money on CPUs, GPUs, and Liquid Nitrogen. The other half I waste.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search