Reservoir, where can I get it? !

Westside05 · 11-28-03, 11:01 PM

I'm looking for a reservoir that would fit to my new&first w/c setup.

Eheim 1250 waterpump. 317g/h (5/8” and ½” barbs)

Gemini Spiral waterblock (3/8” barbs)

A chipset/video waterblock (3/8” barbs)

12”x6”x2” heatercore (Oldsmobile) has a 5/8” lead and a 3/8” modded barb

Recommend me a good (cool looking if possible

) reservoir... or is there any expert DIYer who can sell their customized ones to me?

I'm expecting around $20~30

Help me out Please!

will_maltby · 11-28-03, 11:10 PM

You're probably best off just using a T-Line or making your own res out of some plastic box.

The price for res's is ridiculous considering you can make them for next to nothing with stuff around the house. If you did do that, the only thing you'd probably need to buy is two barbs to attached to it.

mateo88 · 11-28-03, 11:19 PM

Try here

Westside05 · 11-29-03, 12:06 AM

woah $30 plus shipping!!!
I wish I could make one but getting right barb, washer, nut is the hard part..=\

Korndog · 11-29-03, 03:21 AM

uh.. there's always ebay

*hums ebay tune*
http://cgi.ebay.com/ws/eBayISAPI.dll...&category=3673

Heatsinkguy · 11-29-03, 08:34 AM

Hey will this acrylic resvoir from dtek ever crack?
http://www.dtekcustoms.com/index.asp...PROD&ProdID=35

SysCrusher · 11-29-03, 12:36 PM

Quote:

Originally posted by Heatsinkguy
Hey will this acrylic resvoir from dtek ever crack?
http://www.dtekcustoms.com/index.asp...PROD&ProdID=35

Quoted from their site..

Quote:

The Original Bay-Rez is made of ?” Cast Acrylic joined together with a water-tight seal that is pressure-leak tested. Use this product with our UV Water dye and a UV cathode for an unrivaled look.

Wonder how much pressure though. Sounds good though.

11-28-03, 11:01 PM	Thread Starter #1
Westside05 Member Join Date: Nov 2003	Reservoir, where can I get it? ! I'm looking for a reservoir that would fit to my new&first w/c setup. Eheim 1250 waterpump. 317g/h (5/8” and ½” barbs) Gemini Spiral waterblock (3/8” barbs) A chipset/video waterblock (3/8” barbs) 12”x6”x2” heatercore (Oldsmobile) has a 5/8” lead and a 3/8” modded barb Recommend me a good (cool looking if possible ) reservoir... or is there any expert DIYer who can sell their customized ones to me? I'm expecting around $20~30 Help me out Please! __________________ AMD Phenom II X4 955BE @ 240x16.5 \| Scythe Yasya GIGABYTE GA-890GPA-UD3H \| CM 690 II Mushkin DDR3 1600 @ 7-9-7-24 Sapphire 5830 @ 940mhz/1200mhz
	QUOTE Thanks

11-28-03, 11:10 PM	#2
will_maltby Member Join Date: Nov 2001 Location: UK	You're probably best off just using a T-Line or making your own res out of some plastic box. The price for res's is ridiculous considering you can make them for next to nothing with stuff around the house. If you did do that, the only thing you'd probably need to buy is two barbs to attached to it.
	QUOTE Thanks

11-28-03, 11:19 PM	#3
mateo88 Member Join Date: Oct 2002 Location: San Marcos, Texas	Try here
	QUOTE Thanks

11-29-03, 12:06 AM	Thread Starter #4
Westside05 Member Join Date: Nov 2003	woah $30 plus shipping!!! I wish I could make one but getting right barb, washer, nut is the hard part..=\ __________________ AMD Phenom II X4 955BE @ 240x16.5 \| Scythe Yasya GIGABYTE GA-890GPA-UD3H \| CM 690 II Mushkin DDR3 1600 @ 7-9-7-24 Sapphire 5830 @ 940mhz/1200mhz
	QUOTE Thanks

11-29-03, 03:21 AM	#5
Korndog Member Join Date: Nov 2002 Location: California	uh.. there's always ebay hums ebay tune http://cgi.ebay.com/ws/eBayISAPI.dll...&category=3673
	QUOTE Thanks

Reservoir, where can I get it? !

Internet Services

Website Development

Tech Hardware

11-29-03, 08:34 AM	#6
Heatsinkguy Disabled Join Date: Oct 2003	Hey will this acrylic resvoir from dtek ever crack? http://www.dtekcustoms.com/index.asp...PROD&ProdID=35
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search