Notices

Overclockers Forums > Hardware > Memory
Memory
Forum Jump

Will Mushkin L2s give me a better timing?

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 12-08-03, 04:02 PM Thread Starter   #1
secretweapon
Member

 
secretweapon's Avatar 

Join Date: Dec 2003
Location: Edmonton

 
Will Mushkin L2s give me a better timing?


How much imporvement can I expect from mushkin L2s without mods to my motherboard? I'm currently running 2.75v for DDR, 1.575v for cpu, AGP/PCI freq is set to auto, spread spectrum is disabled, performance acceleration mode for chipset = auto, DRAM idle timer = auto, DRAM Refresh mode = 7.8uSec. CPU temp idle = 39, load = 47 (See my sig for my current configuration)

Upping the voltage to 2.85v (max) had no effect on timings. I ran memtest, sandra burn-in, 3dmark 2003, and played hours of max payne 2/CS without any problems at current configuration. However when i shut down windows xp it shows a couple of messages of programs is not responding & couldn't read a memory address It shuts down properly after that without problems.

Thx for ur help!
secretweapon is offline   QUOTE Thanks
Old 12-09-03, 06:22 AM   #2
hepp
Member



Join Date: Oct 2003
Location: Finland

 
The Mushkin lvl 2 would give better timings (2-2-2)but it would not necessarily allow you to increase your FSB.

At 2.85V's they might be able to hold on to those timings at DDR453 but very likely you would have to make do with 2-3-2, and even that is not guaranteed since the spec is only 433.

Turned out a rather inconclusive answer, shall I cancel this..
Nah, at least I'll bump it for you.
hepp is offline   QUOTE Thanks
Old 12-09-03, 11:56 AM Thread Starter   #3
secretweapon
Member

 
secretweapon's Avatar 

Join Date: Dec 2003
Location: Edmonton

 
All I want is some better timing, for some reason I can't get the kingstons to run at 5:4 without some serious error
secretweapon is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Memory
Memory
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 12:59 AM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?