A7N8X Deluxe owners:

Quattro · 12-22-03, 11:10 AM

Hey everyone. Just got my new board, so far I am pleased with it.
I have toyed with the BIOS a bit, however all I can get up to is a FSB of 143... I have good RAM DDR400, so is it my chip?
Could you please post data about system.

FSB
Multiplyer
All Memory Speeds
All Voltages

and of course what processor you have.

moz_21 · 12-22-03, 11:22 AM

First off, make sure AGP is set to 66mhz. This will lock the PCI and AGP speeds.

And all my CPU info is in my sig.

ThePCGuy · 12-22-03, 12:29 PM

FSB - 200mhz
Multiplyer - 11
All Memory Speeds - PC3200 Corsair Value Select default timings
All Voltages - CPU:1.65V, Ram:2.6V, AGP:1.5V

What model Athlon XP 2100+ are you running, can you possibly list the codes that are printed on the cpu? Good luck.

- ThePCGuy

Quattro · 12-23-03, 02:55 AM

It is a palamino I will find out the codes when I get home from work.

ThePCGuy · 12-23-03, 03:00 AM

The Palomino line has been known to not overclock very well, in this particular situation I belive it is your chip that is not cutting it.

- ThePCGuy

Quattro · 12-23-03, 04:39 AM

I have managed to make it run at 148FSB, which just scrapes 1.9GHz. Not bad, but that it the limits of my system.

Quattro · 12-23-03, 11:57 AM

just need one more post to get to 100 posts so I can get into classifieds.

moz_21 · 12-23-03, 12:24 PM

Quote:

Originally posted by Quattro
just need one more post to get to 100 posts so I can get into classifieds.

And that is a good way to get booted from them too.

ThePCGuy · 12-23-03, 06:55 PM

Speaking of posts, I was curious how to find how many posts you've made. Anyone know?

- ThePCGuy

DarkHawk · 12-23-03, 08:17 PM

Check your own profile.

CrashOveride · 12-23-03, 08:22 PM

Quote:

Originally posted by ThePCGuy
The Palomino line has been known to not overclock very well, in this particular situation I belive it is your chip that is not cutting it.

- ThePCGuy

They OC fine for their time, but usually not over 1800mhz, ~2Ghz is the general max for most cooling types.

I would guess your problem is your processor, if you want to get more FSB out of it you can unlock your processor by using some conductive paint to connect the four (very small) L1 bridges. I am pretty sure there is a more detailed link in one of the stickies in the AMD CPUs section.

Quattro · 12-24-03, 07:23 AM

No it is okay now. I have a 2500+ Barton coming.

Drak55 · 12-24-03, 05:06 PM

200fsb
11x
1.75vcore

2200mhz

I have been able to hit 2500 but after a while it feaks out so 2200mhz is what I keep it at. I am having bios problems though. I just ordered a new bios chip for it to see if it helps.

Quattro · 12-25-03, 02:40 PM

The 2500+ Barton I am going to get is unlocked so I hope to get a little more than 2.2GHz.
If I had 200*12= 2400MHz do you think that would be stable.
I think my cooling is fine my processor is at 35*c now and it has been on all day is a heated room.

Perre · 12-26-03, 05:49 PM

I just have to ask.

I'm not really an AMD-guy, but I put togheter this system for a friend.

Asus A7N8X Deluxe 2.0
Barton 2500+
Twinmos 2*256MB
etc

It all works just fine @ stock, but HOW do I oc this sucker?
I tried and changed the external clock from 166 to 200 with 11x multi (it won' take any other multi that I give it) and I get 2200mhz. I managed to play battlefields for about 1½h and it worked just fine, but when I tried to run prime95 it took me just one test to get it to stop.

Is there anyway to set the fsb by 1mhz a time? couse 100-133-166-200 wont just do it for me.

Could all this be couse the multiplier is locked? But I should atleast be able to change the fsb right?

Help a poor intelguy stuck in the AMD jungle out, ok?

Perre · 12-26-03, 05:50 PM

And yes it's PC3200 memory sticks in case you wondered.

Twinmos 256MB PC3200 standard cas 2.5....

yes this was supposed to be a budget computer.

Quattro · 12-27-03, 04:17 AM

Hiya, if you set "system" (i think) from Optimon to user defined you can set the FSB 1MHz at a time, I had to do that to oc my crappy Palamino.

Rokk1972 · 12-30-03, 07:15 PM

FSB: 208
multi: 12
vcore: 1.85
vdimm: 2.8
mem: 1GB pc3200 kingston hyperX 2-2-2-6
chip: 2800 barton, 2.5Ghz

Axis · 01-01-04, 06:55 PM

See sig.

spiritedandy · 01-02-04, 06:55 PM

bartonxp2800+@ 2545mhz
fsb 221
multi 11.5
v core 1.85
vdimm 1.9
timmings 11-2-2-2t corsair xms512

andy

12-22-03, 11:10 AM	Thread Starter #1
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	A7N8X Deluxe owners: Hey everyone. Just got my new board, so far I am pleased with it. I have toyed with the BIOS a bit, however all I can get up to is a FSB of 143... I have good RAM DDR400, so is it my chip? Could you please post data about system. FSB Multiplyer All Memory Speeds All Voltages and of course what processor you have. __________________ Need a new sig
	QUOTE Thanks

12-22-03, 11:22 AM	#2
moz_21 Member Join Date: Jul 2002 Location: MN	First off, make sure AGP is set to 66mhz. This will lock the PCI and AGP speeds. And all my CPU info is in my sig. __________________ [Win7 x64 Desktop] Asus P8P67 w/ i7 2600k @ 4.5GHz 1.37v, CM 212 EVO, 16GB Mushkin DDR3 (991996) @ 2133MHz 9-11-10-28-39 2T, 2x EVGA GTX 560Ti 1GB SSC, OCZ Vertex3 240GB, Antec P183 gunmetal grey, SeaSonic 850W PSU [Ubuntu 12.04 LTS Server] Asus M4A79T w/ Phenom II X6 1090T @ stock, 8GB Kingston DDR3 ECC (KVR1333D3E9SK2/8G), Xigmatek S1284, 8x 1.5TB Samsung MDADM RAID5 array, Fortron 530W PSU [Win7 x64 Media PC] Asus M4A88T, Phenom 2 965 X4 @ stock, 8GB RAM, ATI HD-5450, OCZ Onyx 32GB, Seagate 7200.11 1TB [Win7 x64 Laptop] Acer Aspire 5530, AMD Turion X2 RM70 2GHz, 3GB ram, ATI Radeon HD3200, OCZ Vertex 2 50GB [Smoothwall 3.0] ~~Compaq Deskpro, PIII 833 on an i810 chipset, 512MB CL2 ram, 74Gb Raptor HDD, 2x Realtek NIC~~ Now a KVM on Ubuntu server [My].Heatware
	QUOTE Thanks

12-22-03, 12:29 PM	#3
ThePCGuy Member Join Date: Apr 2003	FSB - 200mhz Multiplyer - 11 All Memory Speeds - PC3200 Corsair Value Select default timings All Voltages - CPU:1.65V, Ram:2.6V, AGP:1.5V What model Athlon XP 2100+ are you running, can you possibly list the codes that are printed on the cpu? Good luck. - ThePCGuy
	QUOTE Thanks

12-23-03, 02:55 AM	Thread Starter #4
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	It is a palamino I will find out the codes when I get home from work. __________________ Need a new sig
	QUOTE Thanks

12-23-03, 03:00 AM	#5
ThePCGuy Member Join Date: Apr 2003	The Palomino line has been known to not overclock very well, in this particular situation I belive it is your chip that is not cutting it. - ThePCGuy
	QUOTE Thanks

A7N8X Deluxe owners:

Internet Services

Website Development

Tech Hardware

12-23-03, 04:39 AM	Thread Starter #6
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	I have managed to make it run at 148FSB, which just scrapes 1.9GHz. Not bad, but that it the limits of my system. __________________ Need a new sig
	QUOTE Thanks

12-23-03, 11:57 AM	Thread Starter #7
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	just need one more post to get to 100 posts so I can get into classifieds. __________________ Need a new sig
	QUOTE Thanks

12-23-03, 06:55 PM	#9
ThePCGuy Member Join Date: Apr 2003	Speaking of posts, I was curious how to find how many posts you've made. Anyone know? - ThePCGuy
	QUOTE Thanks

12-23-03, 08:17 PM	#10
DarkHawk Member Join Date: Mar 2002 Location: Salt Lake City, UT	Check your own profile. __________________ ___________________________________________ AMD Phenom II X4 965 Black (3.6ghz 200x18) ====================================== MSI 870A-G54 8 GB Mushkin Silverline DDR3 1333 Creative SB X-Fi / Logitech X-230 Silverstone Raven RV02B Razer Lachesis - Razer Lycosa - Razer Carcharias
	QUOTE Thanks

12-24-03, 07:23 AM	Thread Starter #12
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	No it is okay now. I have a 2500+ Barton coming. __________________ Need a new sig
	QUOTE Thanks

12-24-03, 05:06 PM	#13
Drak55 Member Join Date: Aug 2002 Location: Pembroke Pines, Florida	200fsb 11x 1.75vcore 2200mhz I have been able to hit 2500 but after a while it feaks out so 2200mhz is what I keep it at. I am having bios problems though. I just ordered a new bios chip for it to see if it helps. __________________ AMD Athlon II X2 240 Regor 2.8GHz ASUS M4A785TD-V EVO G.SKILL 4GB (2 x 2GB) DDR3 SDRAM DDR3 1333. BFG 450W PSU 9800GT Artic cooling freezer 7 Pro Rev 2 Corsair Dominator DDR3 ram cooler My Heatware
	QUOTE Thanks

12-25-03, 02:40 PM	Thread Starter #14
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	The 2500+ Barton I am going to get is unlocked so I hope to get a little more than 2.2GHz. If I had 20012= 2400MHz do you think that would be stable. I think my cooling is fine my processor is at 35c now and it has been on all day is a heated room. __________________ Need a new sig
	QUOTE Thanks

12-26-03, 05:49 PM	#15
Perre Member Join Date: Feb 2003 Location: Sweden	I just have to ask. I'm not really an AMD-guy, but I put togheter this system for a friend. Asus A7N8X Deluxe 2.0 Barton 2500+ Twinmos 2*256MB etc It all works just fine @ stock, but HOW do I oc this sucker? I tried and changed the external clock from 166 to 200 with 11x multi (it won' take any other multi that I give it) and I get 2200mhz. I managed to play battlefields for about 1½h and it worked just fine, but when I tried to run prime95 it took me just one test to get it to stop. Is there anyway to set the fsb by 1mhz a time? couse 100-133-166-200 wont just do it for me. Could all this be couse the multiplier is locked? But I should atleast be able to change the fsb right? Help a poor intelguy stuck in the AMD jungle out, ok?
	QUOTE Thanks

12-26-03, 05:50 PM	#16
Perre Member Join Date: Feb 2003 Location: Sweden	And yes it's PC3200 memory sticks in case you wondered. Twinmos 256MB PC3200 standard cas 2.5.... yes this was supposed to be a budget computer.
	QUOTE Thanks

12-27-03, 04:17 AM	Thread Starter #17
Quattro Member Join Date: Nov 2003 Location: Dubai, U.A.E	Hiya, if you set "system" (i think) from Optimon to user defined you can set the FSB 1MHz at a time, I had to do that to oc my crappy Palamino. __________________ Need a new sig
	QUOTE Thanks

12-30-03, 07:15 PM	#18
Rokk1972 Member Join Date: Apr 2003 Location: Great NorthWest	FSB: 208 multi: 12 vcore: 1.85 vdimm: 2.8 mem: 1GB pc3200 kingston hyperX 2-2-2-6 chip: 2800 barton, 2.5Ghz
	QUOTE Thanks

01-01-04, 06:55 PM	#19
Axis Member Join Date: Nov 2003 Location: Lakewood Ohio	See sig.
	QUOTE Thanks

01-02-04, 06:55 PM	#20
spiritedandy Join Date: Apr 2003 Location: England (middlesbrough)	bartonxp2800+@ 2545mhz fsb 221 multi 11.5 v core 1.85 vdimm 1.9 timmings 11-2-2-2t corsair xms512 andy
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search