Few Questions

D

daNo-

Member

​

Joined

Mar 25, 2003

• Dec 30, 2003

• #1

Hey, my rig requires 1.65 vcore to be able to run stably to pass tests on prime95. From my temperature probe it says its at 1.63 and sometimes fluctuates to 1.6. Is the temperature probe correct??? The bios also reports same voltage readings. Abit boards undervolt correct? They don't overvolt like the asus main boards right ?

Help would be great.

Thanks

 

shortbus_

Member

​

Joined

Nov 21, 2003

Location

CT

• Dec 30, 2003

• #2

sounds about right. should go a little lower with load also.

i set my voltage to 1.65v in bios and get about 1.6v with load.

 

Jimbob7

Member

​

Joined

Jul 25, 2003

Location

Rio de Janeiro

• Dec 30, 2003

• #3

does it do this when the cpu is underload? If so that is perfectly normal. Also when idle the voltage is normally slightly lower i have found.

 

OP

D

daNo-

Member

​

Joined

Mar 25, 2003

• Dec 30, 2003

• Thread Starter
• #4

The voltage when idle is about 1.63 and fluctuates to 1.6 sometimes, but under full load it fluctuates between 1.6-1.57. Anyways these voltage readings are correct, and also is it safe for me to have it at that voltage with no risk of suffering from SNDS. Just making sure

 

shortbus_

Member

​

Joined

Nov 21, 2003

Location

CT

• Dec 30, 2003

• #5

looks good, what do you have it running at now??

 

OP

D

daNo-

Member

​

Joined

Mar 25, 2003

• Dec 30, 2003

• Thread Starter
• #6

3.5 very stable, i had to decide between that and 255 fsb with 5:4. :S