130w peltier

kayl · 01-07-04, 09:05 AM

well today i got really board and decided to try something different. i have been experimenting with a 130w peltier while i prepare for the 226w, insulating checking condensation finding power supply ect etc

so far i get 11x200 at vcore 1.7v and get prime stable (only tested for one hour though) at 24 deg
1.75v 11x200 i got 30 deg so i think o/c with a 130w peltier is definitely a waste of time

so i tried this for something different

i did vcore 1.4v and 11x166 and it passed 3dmark 2001se
and the temps are only 7 oc. and it passed 3dmark 2001se

i checked the socket after a week i ran the peltier for 4 hours with the computer switched off gets below 0 oc, then checked for condensation
there seemed to be none i think i am ready to move to the 226 and feel safe about condensation

kayl · 01-07-04, 11:45 AM

and this is what it looks like

kayl · 01-07-04, 11:46 AM

sorry how do i insert pics
i have two 144kb pic so should be quick to load

lclark2074 · 01-08-04, 12:30 AM

you got to post pictures them from a web sight

kayl · 01-08-04, 12:49 AM

owell guess iwont be able to show ya those pics

squeakygeek · 01-08-04, 01:27 AM

"attatch file" - a couple lines up from the submit button, on the page where you make your post.

Lewiser · 01-08-04, 01:52 AM

Chop chop I want too see these pics

kayl · 01-08-04, 10:19 PM

so squeakygeek is there any way i can edit the original post and insert those pics

squeakygeek · 01-09-04, 01:26 AM

Quote:

Originally posted by kayl
so squeakygeek is there any way i can edit the original post and insert those pics

Yes, underneath each post is a line of buttons starting with profile. On the far right are two buttons. One is edit, and the other is quote. Edit is self-explanitory, quote lets you make a new post while quoting the text of the post that you are quoting, like I am doing now.

kayl · 01-09-04, 10:52 AM

well if i run everything at stock speeds i get 11 deg idle and 19 deg full load as stock everything barton XP2500+

squeakygeek · 01-09-04, 12:24 PM

Quote:

Originally posted by kayl
well if i run everything at stock speeds i get 11 deg idle and 19 deg full load as stock everything barton XP2500+

I can't wait to get my pelt/water setup running

kayl · 01-22-04, 07:03 AM

Quote:

Originally posted by kayl
owell guess iwont be able to show ya those pics

ok now its actually a 226 tec, sorry its taken so long to figure out how to make a web address to post these pics

ok this is my first web page eva
i will make it betta at a later date

http://badmama.com.au/~kayl/

01-07-04, 09:05 AM	Thread Starter #1
kayl Member Join Date: Nov 2003 Location: australia	130w peltier well today i got really board and decided to try something different. i have been experimenting with a 130w peltier while i prepare for the 226w, insulating checking condensation finding power supply ect etc so far i get 11x200 at vcore 1.7v and get prime stable (only tested for one hour though) at 24 deg 1.75v 11x200 i got 30 deg so i think o/c with a 130w peltier is definitely a waste of time so i tried this for something different i did vcore 1.4v and 11x166 and it passed 3dmark 2001se and the temps are only 7 oc. and it passed 3dmark 2001se i checked the socket after a week i ran the peltier for 4 hours with the computer switched off gets below 0 oc, then checked for condensation there seemed to be none i think i am ready to move to the 226 and feel safe about condensation Last edited by kayl; 01-07-04 at 10:51 AM.
	QUOTE Thanks

01-07-04, 11:45 AM	Thread Starter #2
kayl Member Join Date: Nov 2003 Location: australia	and this is what it looks like
	QUOTE Thanks

01-07-04, 11:46 AM	Thread Starter #3
kayl Member Join Date: Nov 2003 Location: australia	sorry how do i insert pics i have two 144kb pic so should be quick to load
	QUOTE Thanks

01-08-04, 12:30 AM	#4
lclark2074 Member Join Date: Jul 2002 Location: Coventry Rhode Island	you got to post pictures them from a web sight __________________ abit bx6r2 abit AI7 512 sd ram pc150 ddr1GB pc4200 celoron 600 oc 900 intel p4 2.8E geforce fx 5200 AGP Creative Labs Audigy2 overclocker seti team member Avatar by Über~PhLuBB
	QUOTE Thanks

01-08-04, 12:49 AM	Thread Starter #5
kayl Member Join Date: Nov 2003 Location: australia	owell guess iwont be able to show ya those pics Last edited by kayl; 01-08-04 at 07:51 PM.
	QUOTE Thanks

130w peltier

Internet Services

Website Development

Tech Hardware

01-08-04, 01:27 AM	#6
squeakygeek Member Join Date: Jan 2003 Location: University of Illinois at Urbana Champaign	"attatch file" - a couple lines up from the submit button, on the page where you make your post.
	QUOTE Thanks

01-08-04, 01:52 AM	#7
Lewiser Registered Join Date: Dec 2003	Chop chop I want too see these pics
	QUOTE Thanks

01-08-04, 10:19 PM	Thread Starter #8
kayl Member Join Date: Nov 2003 Location: australia	so squeakygeek is there any way i can edit the original post and insert those pics
	QUOTE Thanks

01-09-04, 10:52 AM	Thread Starter #10
kayl Member Join Date: Nov 2003 Location: australia	well if i run everything at stock speeds i get 11 deg idle and 19 deg full load as stock everything barton XP2500+
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search