[Evil-c]

Ok it's a 533 not 533a as it is silver.
my mobo as fsb settings of :-
66,75,83,100,112,124,133,140 and 150
Only one that will run stable is 75 using the 10% cpu power booster at 600mhz
any other setting and windows hangs or sys wont even boot..
i will read the articalc on wiring my cpu and let you know what happens..

Celeron 533@600
Gigabyte GA-6VX7+ mobo
320mb ram pc 100& pc 133
sblive 1024
Prophet geforce 2 mx
60gig hdd

[batboy]

You have the older Celeron I chip which might be about maxed out at 600. The 533 Celeron II chips will go much higher, but it's a totally different and newer design. With your current system (mobo etc.), that's probably about all you'll get. But, I'll be happy if you prove me wrong.

[Newbie_Doo]

Evil-c (Feb 25, 2001 08:24 a.m.):
Ok it's a 533 not 533a as it is silver.
i will read the articalc on wiring my cpu and let you know what happens..

STOP!!! DO NOT WIRE YOUR CPU! That article was for the newer CeleronII. http://developer.intel.com/design/celeron/datashts/243658.htm <<< this is the datasheet for all celerons. Download it and read it. Your CPU is a mendocino core, not a coppermine core. It's default voltage is already 2.0 volts. Check the guide on the main page for the tricks to overclocking the older celerons.

[Phil]

you are luck you got 600 as batboy said this is about the limit for ppga celerons, most don't make it over 550mhz