[DaRky4YoU]

kingston pc3500 hyperx seems to be the only good ram i can find in www.maxpc.nl where im buying my system

its for a 2.6c p4, will i be able to do 3.2 ghz with this combo?>??
the mobo im getitng is the abit ic7 btw

[HDeno]

Hi,

I have one stick of 512mb HyperX PC3500 with a 2.6C on a P4P800-DX and I can run at 3.25GHz rock solid (whole night of Prime95 and also memtest).

I use the 5:4 divider and my memory is now set at 2-3-3-6 at 2.85 volts, but I havent tried to tweak the timings further more because I am waiting to get a second stick before...

So I say that unless you are very unlucky with your CPU, you should have no problem doing the same as me....

Hugues

[nikeair]

I wouldnt recommend this ram, I have 2 sticks of it in dual channel DDR, 2.8c P4 @ 3.5ghz, I bump it to 408mhz on the memory at 5:4 divider and it gives me page errors in a non-paged error during 3dmark2001SE. 400mhz on the ram and it runs fine.

[crimedog]

i don't know if some chips are good and some are not... i think they need voltage anyways

some people have gotten them up to 270+mhz 2226 with 3.5v+

[nikeair]

oh yeah sorry...Im running 2.8v on mine...maybe I'll bump it when I get home and see if I get better results

[pkrew]

If you're looking for bh-5 modules then I would pass on the hyperX pc3500. They stoped putting bh-5 in that model of ram months ago. The newer pc3500 doesn't overclock near as well

[nikeair]

yeah, Im regretting getting the kingston, should've waited and got the new PC3200 corsair XMS for the same price, atleast it would've clocked to the speed it advertises and then some. hey pkrew our setups are pretty simular :P except I dunt have as good of a video card

[pkrew]

Well, you have a much nicer DVD recorder Nice machine