- Joined
- Jul 30, 2002
- Location
- Midland, Ontario
I am trying to get Dual Display to work with a single card
at the moment I have this as my XF86Config-4
its working for 1 display,
I figure I need to know my BUS ID as Bolded in the file above, but I don't know how to find it, anyone have any clues?
or a Working Set up using 2 Displayes and a Single Video card, so I can figure out what I need.
at the moment I have this as my XF86Config-4
Code:
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "ServerLayout"
Identifier "layout1"
Screen "screen1" 0 0
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
# allows the server to start up even if the mouse doesn't work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
Option "allowmouseopenfail"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
Identifier "monitor1"
VendorName "NEC"
ModelName "NEC MultiSync 6FG"
HorizSync 27.0 - 79.0
VertRefresh 55.0 - 90.0
ModeLine "1024x480" 65.0 1024 1032 1176 1344 480 488 494 563 -hsync -vsync
ModeLine "768x576" 50.0 768 832 846 1000 576 590 595 630
ModeLine "768x576" 63.1 768 800 960 1024 576 578 590 616
EndSection
Section "Monitor"
Identifier "monitor2"
VendorName "TVM"
ModelName "AS6S / TCO6S"
HorizSync 30.0 - 70.0
VertRefresh 50 - 120
Section "Device"
Identifier "device1"
Driver "ati"
BoardName "ATI Radeon 8500"
Option "DPMS"
Option "AGPMode" "4"
Option "MonotorLayout" "AUTO, AUTO"
Option "ScreenOverlap" "0"
[color=red][b]BusID ""[/b][/color]
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultDepth 16
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "Screen"
Identifier "screen2"
Device "device1"
Monitor "monitor2"
DefaultDepth 16
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
its working for 1 display,
I figure I need to know my BUS ID as Bolded in the file above, but I don't know how to find it, anyone have any clues?
or a Working Set up using 2 Displayes and a Single Video card, so I can figure out what I need.