Notices

Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Pic of Ownage Cooling Setup

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 01-20-04, 04:19 PM Thread Starter   #1
doc6886
Member



Join Date: Dec 2003

 
Pic of Ownage Cooling Setup


I'm not going to do this, but it is pretty realistic for you guys that hook up ducts to your windows. Just look at the pic and tell me what you guys think.
doc6886 is offline   QUOTE Thanks
Old 01-20-04, 04:21 PM Thread Starter   #2
doc6886
Member



Join Date: Dec 2003

 
doc6886 is offline   QUOTE Thanks
Old 01-20-04, 04:22 PM   #3
TazExtreme3
Member

 
TazExtreme3's Avatar 

Join Date: May 2003
Location: Portage, Michigan

10 Year Badge
 
what pic?
EDIT!!!!!////oh that pic

__________________
-Greg-

Asus G73JW: i7 740QM -- 8GB RAM -- OCZ Agility 2 80GB SSD -- 500GB HDD -- Nvidia GeForce GTX 460M
HTPC: Gigabyte H55N-USB3 -- i3 540 -- G.Skill 2x2GB DDR3 1600 Ripjaws -- 500GB Hitachi -- 4TB Western Digital Green -- Sapphire 5770 Vapor X -- Corsair H50 -- SilverStone SUGO SG06
My Heatware
TazExtreme3 is offline   QUOTE Thanks
Old 01-20-04, 04:28 PM   #4
Duke309
Registered



Join Date: Sep 2002

 
and then it rains... good luck with that idea
Duke309 is offline   QUOTE Thanks
Old 01-20-04, 04:30 PM   #5
rhino56
Member

 
rhino56's Avatar 

Join Date: Dec 2003
Location: Arkansas

 
well i think you would freeze to death here because its about 19 degrees Farenheit right now.
the amount of air one small 80mm fan brings in is enough to make my entire case feel like a block of ice when you touch it.
the air exiting the case is cool also but not enough to freeze you out of the room, just enough to keep you happy and healthy with fresh air.

__________________
Asus Maximus Extreme IV-Z
i5-2500K Sandy Bridge 5.0GHz
G.SKILL Ripjaws X 8GB
SAPPHIRE Radeon HD 6970
Crucial M4 128GB III SSD
HITACHI 750GB 7200RPM SATA
Noctua NH-D14
Corsair 650D
rhino56 is offline   QUOTE Thanks
Old 01-20-04, 04:30 PM Thread Starter   #6
doc6886
Member



Join Date: Dec 2003

 
You'd just move the PC away and put an old bed sheet there and turn off the fan
doc6886 is offline   QUOTE Thanks
Old 01-20-04, 04:35 PM   #7
rhino56
Member

 
rhino56's Avatar 

Join Date: Dec 2003
Location: Arkansas

 
Quote:
Originally posted by doc6886
You'd just move the PC away and put an old bed sheet there and turn off the fan
im sorry, but i think you must live in a town called ghetto

__________________
Asus Maximus Extreme IV-Z
i5-2500K Sandy Bridge 5.0GHz
G.SKILL Ripjaws X 8GB
SAPPHIRE Radeon HD 6970
Crucial M4 128GB III SSD
HITACHI 750GB 7200RPM SATA
Noctua NH-D14
Corsair 650D
rhino56 is offline   QUOTE Thanks
Old 01-20-04, 04:58 PM Thread Starter   #8
doc6886
Member



Join Date: Dec 2003

 
Quote:
Originally posted by rhino56

im sorry, but i think you must live in a town called ghetto
I don't get it? Philadelphia... is ghetto though
doc6886 is offline   QUOTE Thanks
Old 01-20-04, 05:20 PM   #9
rhino56
Member

 
rhino56's Avatar 

Join Date: Dec 2003
Location: Arkansas

 
post deleted, don't post like that again. -eobard

__________________
Asus Maximus Extreme IV-Z
i5-2500K Sandy Bridge 5.0GHz
G.SKILL Ripjaws X 8GB
SAPPHIRE Radeon HD 6970
Crucial M4 128GB III SSD
HITACHI 750GB 7200RPM SATA
Noctua NH-D14
Corsair 650D
rhino56 is offline   QUOTE Thanks
Old 01-20-04, 08:18 PM   #10
archilochus
THE Senior FANMAN

 
archilochus's Avatar 

Join Date: Sep 2003
Location: Houston,TX-USA

 
Sounds good but its not very practicle. To much dust,dirt,and other issues.Keep on thinking though,thats what leads to good ideas eventually. THE FANMAN

__________________
MOBYDICK
Intel-2.4c-HT @ 2.9 *SP-94 w/ Delta 92mm HHE w/25mm spacer *FIC-865PE-Max
OCZ 2x512 EL Gold PC 4000 @ 1:1 *2.5/4/4/7 *BFG Geforce 7800 GS OC
80g.Maxtor PATA and SATA *Xaser III. v1000D modified
FULL LOAD Temp 36C / Syst. temp 23C /Ambient 20C (room temp)
F@H TEAM 32 :thup:
archilochus is offline   QUOTE Thanks
Old 01-20-04, 08:24 PM   #11
ultimasailing
Registered



Join Date: Dec 2003

 
condensation is bad


as well as thief, who would like to take your kick ass system for themselves.
ultimasailing is offline   QUOTE Thanks
Old 01-20-04, 08:31 PM   #12
Soja
Member

 
Soja's Avatar 

Join Date: Jan 2001
Location: OC, CA

10 Year Badge
 
I think a duct would be sufficient and also prevent the issues posted above. A couple 192mm+ comair like fans should provide enough air to compete with your "huge fan."

__________________
e4300 @ 3006mhz 1.55v abit ib9 2x1gb x800gto @ 615/620 corsair hx520w ubuntu feisty fawn fold heat
Soja is offline   QUOTE Thanks
Old 01-20-04, 08:41 PM   #13
Korndog
Member

 
Korndog's Avatar 

Join Date: Nov 2002
Location: California

 
that would be comparible to the ducting idea.
depending on how you want it to work, i'm guessing you don't want it to freeze your room, having a fan blowing into a metall case without any open ends just won't work. with some fans, it may make them stall and blow no air at all. For good air flow, you need low pressure. an inclosed case has some really high pressure. if you had a cover on the size of the case and put one fan as intake and one as exhaust (just on the side case) that would work nicly. Then again, that wouldn't be very much off ducting except you would have a larger hole in the side of our house.
Korndog is offline Heatware Profile   QUOTE Thanks
Old 01-20-04, 08:56 PM   #14
drewmister
Member

 
drewmister's Avatar 

Join Date: Jan 2004
Location: Cheyenne, Wyoming

 
umm condensation... summer... lol never work try again

__________________
DFI NForce4 Expert
AMD Opteron 150 (Venus Core) @ 2700mhz (270x10)
Cooled by Thermalright XP-120
2x512mb Gskill GBFF pc4800 2.5-3-3-7 1:1
Evga 6800 Ultra
74 GB WD 10,000rpm Raptor
500 GB Hitachi Desktar 7K500
SB Audigy 2 ZS w/ Logitech Z680 5.1 Surround Sound
OCZ Powerstream 600W
<-- Yep that's me in the avatar; chess rules!

MY HEATWARE 7-0-0
drewmister is offline   QUOTE Thanks
Old 01-20-04, 09:11 PM   #15
Arkangyl
Member

 
Arkangyl's Avatar 

Join Date: Dec 2003

 
heh, outside here its round 20f these days, last week it was below 0, 24/7... -50f at some points in time... I'd have had a cheap prommy
Arkangyl is offline   QUOTE Thanks
Old 01-20-04, 09:15 PM   #16
rhino56
Member

 
rhino56's Avatar 

Join Date: Dec 2003
Location: Arkansas

 
thats what im doing and no probs with condensation at all.
its a nice clean job and im getting super low temps but come summertime ill be looking for a new solution.

__________________
Asus Maximus Extreme IV-Z
i5-2500K Sandy Bridge 5.0GHz
G.SKILL Ripjaws X 8GB
SAPPHIRE Radeon HD 6970
Crucial M4 128GB III SSD
HITACHI 750GB 7200RPM SATA
Noctua NH-D14
Corsair 650D
rhino56 is offline   QUOTE Thanks
Old 01-20-04, 09:31 PM   #17
Korndog
Member

 
Korndog's Avatar 

Join Date: Nov 2002
Location: California

 
Quote:
Originally posted by drewmister
umm condensation... summer... lol never work try again
condensation is with cold objects and hot/warm air, hence chillers/peltiers/phasechange need to be insulated because they are in a warm envirenment.
hot objects with cold air doesn't condensate. the cup of joe right next to be was just boiling a few min. ago ~90c, my rooms about 18.3c, doesn't seem to condensate at all.
Korndog is offline Heatware Profile   QUOTE Thanks
Old 01-20-04, 10:22 PM   #18
rhino56
Member

 
rhino56's Avatar 

Join Date: Dec 2003
Location: Arkansas

 
if it were a hot object and just kinda cold air creeping in it may form some moisture, but there is so much air blowing around with fans that any moisture just gets evaporated.
kinda like if you get condensation on your window. put a fan on it and it will be gone no matter what the temp.

__________________
Asus Maximus Extreme IV-Z
i5-2500K Sandy Bridge 5.0GHz
G.SKILL Ripjaws X 8GB
SAPPHIRE Radeon HD 6970
Crucial M4 128GB III SSD
HITACHI 750GB 7200RPM SATA
Noctua NH-D14
Corsair 650D
rhino56 is offline   QUOTE Thanks
Old 01-20-04, 10:28 PM   #19
drewmister
Member

 
drewmister's Avatar 

Join Date: Jan 2004
Location: Cheyenne, Wyoming

 
your cup of joe was steaming right... steaming = condensation condensation of air being warmed up by the material (cup of joe) which in turn holds more water... then is cooled by other air... holds less water and condenses hence your steam... It is still condensation just another phase... please consider this before bashing my post...

warm always transfers to cold... it is a law of physics in this case hot heats colder air ... air holds more water ... other air cools warmer air ... colder air holds less water ... therefore water condenses

explains clouds... warm surface warmed by the radiation of the sun in turn heat the air right above it.... air holds more water ... warm air rises.. then as that air rises it gets cooled by the colder air.. then the air in turn holds less water and the water condenses into clouds...(radiation passes through air molecules not heating them explaining why it gets colder higher)

your cup of joe isnt condesning its causing condensation....

__________________
DFI NForce4 Expert
AMD Opteron 150 (Venus Core) @ 2700mhz (270x10)
Cooled by Thermalright XP-120
2x512mb Gskill GBFF pc4800 2.5-3-3-7 1:1
Evga 6800 Ultra
74 GB WD 10,000rpm Raptor
500 GB Hitachi Desktar 7K500
SB Audigy 2 ZS w/ Logitech Z680 5.1 Surround Sound
OCZ Powerstream 600W
<-- Yep that's me in the avatar; chess rules!

MY HEATWARE 7-0-0
drewmister is offline   QUOTE Thanks
Old 01-20-04, 10:33 PM   #20
drewmister
Member

 
drewmister's Avatar 

Join Date: Jan 2004
Location: Cheyenne, Wyoming

 
i still dont't believe a fan would get out all of the air that is condesning... (their are going to be pockets of air that aren't aerodynamic in a computer unless of course this is rocket science computer where it is perfect aeordynamic and air transfer is 100%... all air that goes in comes out at the same rate.. air pockets and curling air are just bound to happen...)

__________________
DFI NForce4 Expert
AMD Opteron 150 (Venus Core) @ 2700mhz (270x10)
Cooled by Thermalright XP-120
2x512mb Gskill GBFF pc4800 2.5-3-3-7 1:1
Evga 6800 Ultra
74 GB WD 10,000rpm Raptor
500 GB Hitachi Desktar 7K500
SB Audigy 2 ZS w/ Logitech Z680 5.1 Surround Sound
OCZ Powerstream 600W
<-- Yep that's me in the avatar; chess rules!

MY HEATWARE 7-0-0
drewmister is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling
Cooling Discussion of fans, heatsinks, thermal pastes and putting it all together to keep your rig cool
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 03:19 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?