• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

KHX3200(nonA) can't set to turbo?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

fvzttic

New Member
Joined
Feb 5, 2004
Location
taiwan
KHX3200(nonA) can't set to turbo!

Hi, everybody.

I have a problem with my KHX3200K2/1G.

As the subject, when i set the performance mode to turbo, my computer will crash.

And i have tried to test my memory on IC7-MAX3, the same as my motherboard when i set the GAT to F1, street racer or turbo, it could't boot into WinXP.

Does anyone have the same problem as mine?
 
Last edited:
When my bios setting as follows, no matter up Vdimm to 2.85V or not, my compuetr will crash while it boot into WinXP,
intel 2.4 CG without OC
mb p4c800-e dlx
vcore auto
dram freq 400
preformance mode turbo
cas# latency 2
ras# precharge 2
ras# to cas# delay 2
precharge delay 6
burst length 8
preformance acceleration mode enabled
dram idle timer auto
dram refresh rate auto
ich delayed transaction enabled

But, when i set preformance mode = standard and preformance acceleration mode = auto, even at Vdimm = auto, my system is very stable that can pass prime95 24hrs at very tight timings.

So, i want to know whether it is the characteristic of KHX3200K2/1G or not.
Or i am the exceptional case.
 
Speed_Mechanic2 said:
Have you tried changing RAS-to-CAS Delay to 5 and having Turbo on?
ya, i have tried to change RAS-to-CAS Delay to 3 or 4. but, the trouble doesn't be solved.

Btw, refer to your sig.
I found that you have kingston BH-5 and abit is7.
So, i want to know that can you set GAT to F1, street racer, turbo.
because, i have tried to test my memory on IC7-MAX3, when i set the GAT to F1, street racer or turbo, even at loose timings or up Vdimm to 2.8V, it could't boot into WinXP.

But, if i set the bios in my system as follows:

vcore auto
dram freq 400
preformance mode standard
cas# latency 2
ras# precharge 2
ras# to cas# delay 2
precharge delay 6
burst length 8
preformance acceleration mode auto
dram idle timer auto
dram refresh rate auto
ich delayed transaction enabled

it will be very stable to pass prime95.

thank you for your reply, Speed_Mechanic2.
 
Back