P4P800 Northbridge Heatsink Question

Polargoat · 02-10-04, 10:22 PM

i used screws but i like the glugun idea better and will prolly do that.
I tried tightening the dram to 2-5-2-2 and it wouldnt post so set it back to 2-5-3-3 and ran sisoft benchs and is alot better than my original config.Its stable and i have a good mix of timings and fsb.250 fsb and tight timings = fast all around to me.maybe ill test benchs tho with looser timings and higher fsb and see what kind of diff i get with mem benchmarks.

ciku · 02-10-04, 10:45 PM

did u try checking ur mrb with ctiaw?

Bobby · 02-11-04, 01:33 AM

CAS to RAS should be set to 3 on 875/865 boards. So from top to bottom in your bios, try 2-2-3-5. That's what I have my memory set to.

-Bobby

ciku · 02-11-04, 02:02 AM

bobby yes hehehe that's how u actually configure in ur bios

but i dunno why they present it in a different way

ciku · 02-11-04, 02:04 AM

btw, bobby, ur not updating ur bios? i noticed ur still using rev. 1012 when rev. 1015 is out

Bobby · 02-11-04, 02:13 AM

If it ain't broke...

I have 1014 and now 1015 downloaded but I haven't seen anything that warrants a bios upgrade. My system is running fine and I haven't had the time to upgrade. Maybe in a couple of weeks.

-Bobby

ciku · 02-11-04, 02:46 AM

ok

good luck then

Polargoat · 02-11-04, 10:19 AM

here are a couple of screenies one of ctiaw and one of my case.Looks like i do have partial pat enabled.

and my case

ciku · 02-11-04, 01:05 PM

looks cool to me

ciku · 02-13-04, 03:25 PM

damn! this sunon fan rocks!

Chaser · 02-16-04, 04:04 PM

great ideas guys, imma try some out

ciku · 02-16-04, 07:46 PM

first i screwed it over, earlier i used epoxy and now im worried, i think if i remove it from the heatsink, i'll damage it.. LOL

Propilot · 02-16-04, 07:55 PM

Here is mine.

ciku · 02-16-04, 08:09 PM

cool!

waiting for my new ram to arrive

02-10-04, 10:22 PM	#41
Polargoat Member Join Date: Jan 2004 Location: Navarre, FL	i used screws but i like the glugun idea better and will prolly do that. I tried tightening the dram to 2-5-2-2 and it wouldnt post so set it back to 2-5-3-3 and ran sisoft benchs and is alot better than my original config.Its stable and i have a good mix of timings and fsb.250 fsb and tight timings = fast all around to me.maybe ill test benchs tho with looser timings and higher fsb and see what kind of diff i get with mem benchmarks.
	QUOTE Thanks

02-10-04, 10:45 PM	#42
ciku Member Join Date: Jan 2004	did u try checking ur mrb with ctiaw? __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-11-04, 01:33 AM	#43
Bobby Member Join Date: May 2003 Location: New Jersey	CAS to RAS should be set to 3 on 875/865 boards. So from top to bottom in your bios, try 2-2-3-5. That's what I have my memory set to. -Bobby __________________ Gigabyte GA-Z68-D3 Ver 2.0 Bios FB \| Intel i5 2500k @ 4.2ghz \| CM Hyper 212 Evo \| Corsair vx550w 2 x 4gb Kingston HyperX \| Asus HD6950 DCUII 2gb \| LG 22" Widescreen \| MS Windows 7 Ultimate 2 x 160gb Seagate SATA Raid0 \| 500gb Seagate \| 1tb Seagate \| LiteOn DVD 16x \| Toshiba 16x/48x DVD Enermax CS10181-B \| Audigy 2 OEM \| LogiTech Z-640 \| LogiTech G5 \| Tt Hardcano 9 Fan controller Heatware
	QUOTE Thanks

02-11-04, 02:02 AM	#44
ciku Member Join Date: Jan 2004	bobby yes hehehe that's how u actually configure in ur bios but i dunno why they present it in a different way __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-11-04, 02:04 AM	#45
ciku Member Join Date: Jan 2004	btw, bobby, ur not updating ur bios? i noticed ur still using rev. 1012 when rev. 1015 is out __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

P4P800 Northbridge Heatsink Question

Internet Services

Website Development

Tech Hardware

02-11-04, 02:13 AM	#46
Bobby Member Join Date: May 2003 Location: New Jersey	If it ain't broke... I have 1014 and now 1015 downloaded but I haven't seen anything that warrants a bios upgrade. My system is running fine and I haven't had the time to upgrade. Maybe in a couple of weeks. -Bobby __________________ Gigabyte GA-Z68-D3 Ver 2.0 Bios FB \| Intel i5 2500k @ 4.2ghz \| CM Hyper 212 Evo \| Corsair vx550w 2 x 4gb Kingston HyperX \| Asus HD6950 DCUII 2gb \| LG 22" Widescreen \| MS Windows 7 Ultimate 2 x 160gb Seagate SATA Raid0 \| 500gb Seagate \| 1tb Seagate \| LiteOn DVD 16x \| Toshiba 16x/48x DVD Enermax CS10181-B \| Audigy 2 OEM \| LogiTech Z-640 \| LogiTech G5 \| Tt Hardcano 9 Fan controller Heatware
	QUOTE Thanks

02-11-04, 02:46 AM	#47
ciku Member Join Date: Jan 2004	ok good luck then __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-11-04, 10:19 AM	#48
Polargoat Member Join Date: Jan 2004 Location: Navarre, FL	here are a couple of screenies one of ctiaw and one of my case.Looks like i do have partial pat enabled. and my case
	QUOTE Thanks

02-11-04, 01:05 PM	#49
ciku Member Join Date: Jan 2004	looks cool to me __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-13-04, 03:25 PM	#50
ciku Member Join Date: Jan 2004	damn! this sunon fan rocks! __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-16-04, 04:04 PM	#51
Chaser Member Join Date: Feb 2004 Location: Glastonbury, CT	great ideas guys, imma try some out
	QUOTE Thanks

02-16-04, 07:46 PM	#52
ciku Member Join Date: Jan 2004	first i screwed it over, earlier i used epoxy and now im worried, i think if i remove it from the heatsink, i'll damage it.. LOL __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

02-16-04, 07:55 PM	#53
Propilot Member Join Date: Jul 2001 Location: Houston, Texas	Here is mine. __________________ P4 2.8c @ 3.36 (240fsb), 1.6 vcore, P4P800 dlx, 2 x 512 PC3700 OCZ Gold Rev. 2, (1:1) 2.5-3-3-6, Zalman CNPS7000A, Samsung SATA 120gb, 2 x WD 30gb VIA Raid 1, Geforce 6800 GT, Antec TP 500
	QUOTE Thanks

02-16-04, 08:09 PM	#54
ciku Member Join Date: Jan 2004	cool! waiting for my new ram to arrive __________________ Intel i7-3770K [4.3ghz/Auto] \| VisionTek HD 7970 [1050/1500/Auto] \| Crucial M4 256gb \| G. Skill Ares 16gb DDR3-1866 Msi Z77A-GD65 \| Corsair H100i Push/Pull \| Creative SB X-Fi Titanium HD \| Corsair AX750 \| Corsair Obsidian 650D \| Win 7 Ultimate x64 [Heatware]
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search