heatsink/fan for 2.4C OC'd to 3.0-3.2 range?

HDClown · 02-22-04, 06:10 PM

P4 2.4C with an OC to the 3.0/3.2 GHz Range. What's a good heatsink/fan combo that provides necessary cooling but doesn't sound like a turbine? I'm trying to keep noise down in general.

necromanx13x · 02-22-04, 06:16 PM

I would go with a Thermalright sp-94 and either a panaflo fan or the thermaltake smartcase2 fan which comes with a fan controller.

archilochus · 02-22-04, 06:24 PM

WELCOME TO THE FORUM: I recommend the Sp-94 by www.thermalright.com also. I run a 92mm Panaflo U1A on my SP-94 HS.Fan specs are 3450 rpm @ 68.80 cfm / 43 dBA full tilt.This fan is available at www.digikey.com Enter item# P11044-ND...for the U1BO..Diff. being solid housing corners and locked rotor alarm sensor.

stan03 · 02-22-04, 07:09 PM

archilochus as usuall posts something i agree with, but if you want to go with something slightly cheaper you could go with the slk 900/947/948 all are good heatsinks and would be able to deal with a 2.4C@3.2 easily

rxc · 02-22-04, 07:26 PM

Just listen to the advice above

Pick a Thermalright and a Panaflo that meets your noise/performance requirements.

02-22-04, 06:10 PM	Thread Starter #1
HDClown Registered Join Date: Feb 2004	heatsink/fan for 2.4C OC'd to 3.0-3.2 range? P4 2.4C with an OC to the 3.0/3.2 GHz Range. What's a good heatsink/fan combo that provides necessary cooling but doesn't sound like a turbine? I'm trying to keep noise down in general.
	QUOTE Thanks

02-22-04, 06:16 PM	#2
necromanx13x Member Join Date: Nov 2003 Location: LI, NY	I would go with a Thermalright sp-94 and either a panaflo fan or the thermaltake smartcase2 fan which comes with a fan controller.
	QUOTE Thanks

02-22-04, 06:24 PM	#3
archilochus THE Senior FANMAN Join Date: Sep 2003 Location: Houston,TX-USA	WELCOME TO THE FORUM: I recommend the Sp-94 by www.thermalright.com also. I run a 92mm Panaflo U1A on my SP-94 HS.Fan specs are 3450 rpm @ 68.80 cfm / 43 dBA full tilt.This fan is available at www.digikey.com Enter item# P11044-ND...for the U1BO..Diff. being solid housing corners and locked rotor alarm sensor. __________________ MOBYDICK Intel-2.4c-HT @ 2.9 SP-94 w/ Delta 92mm HHE w/25mm spacer FIC-865PE-Max OCZ 2x512 EL Gold PC 4000 @ 1:1 2.5/4/4/7 BFG Geforce 7800 GS OC 80g.Maxtor PATA and SATA *Xaser III. v1000D modified FULL LOAD Temp 36°C / Syst. temp 23°C /Ambient 20°C (room temp) F@H TEAM 32 :thup:
	QUOTE Thanks

02-22-04, 07:09 PM	#4
stan03 Member Join Date: Mar 2003	archilochus as usuall posts something i agree with, but if you want to go with something slightly cheaper you could go with the slk 900/947/948 all are good heatsinks and would be able to deal with a 2.4C@3.2 easily
	QUOTE Thanks

02-22-04, 07:26 PM	#5
rxc Member Join Date: Dec 2003 Location: Bay Area	Just listen to the advice above Pick a Thermalright and a Panaflo that meets your noise/performance requirements.
	QUOTE Thanks

heatsink/fan for 2.4C OC'd to 3.0-3.2 range?

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search