What will a 2.8C at 3.8 in a Vapo do on good air cooling

Wam · 02-24-04, 07:12 PM

I'm thinking of buy one of a guy that used to have a 2.8C SL6WF at 3.8 in a Vapo. For you guys in the know can you give me a rough idea what to expect to get with SLK900-u etc.

Silversinksam · 02-25-04, 03:13 AM

Quote:

Originally posted by Wam
I'm thinking of buy one of a guy that used to have a 2.8C SL6WF at 3.8 in a Vapo. For you guys in the know can you give me a rough idea what to expect to get with SLK900-u etc.

My Crystal ball says:
3493 Mhz

flapperhead · 02-25-04, 07:41 AM

my understanding is, u get 200-300mhz with a vapochill

Wam · 02-25-04, 09:39 AM

Thanks guys, that pretty much backs up what I'm thinking. If I get it I'll post back here to confirm and see Silversinksam's crystal ball need cleaning or not.

$anch3z · 02-25-04, 12:45 PM

see if you can find a SL6Z5 imo they are rockets mine done 3.6 straight out of the box and now seem to have gained another 30 mhz over time @ 3631 now.....

you gotta consider what volts he had running through it to get that speed to

Wam · 02-25-04, 06:23 PM

I'm actually getting another one now that did 3.8 in a Vapo but I don't know what the stepping is or what V's he used but I'll find out.

I've just sold the CPU in my sig so as long as I get 3.4+ I won't mind but SL6Z5 would be nice but unlikely.

AudiMan · 02-25-04, 07:02 PM

My 2.8 (SL6Z5) did 3.7ish on air (SLK-900) and now it's doing 3.8 in my prommy with slightly higher voltages.

(If anyone cares, I'm using a P4C800-E DX and Mushkin Lev. II)

I didn't even gain 50 MHz.

Wam · 02-26-04, 08:11 PM

He says that it was doing 3.8 in the Vapo on default voltage. That sounds like a good omen but we will soon find out.

Also just digressing a little, if I run at 250FSB then the mem will be at 200 which means I will be able to enable PAT fully. Is this correct. How much performance benefit is there from PAT?

I take it there's still no way to enable PAT after 200FSB unless you're running 1:1?

Wam · 03-07-04, 03:43 PM

Just to update those guys who replied. As in my sig, I managed to run it stabily at 262 FSB (3670Mhz) mem at 4:5. Would probably get a little more with a SP-94 and higher powered fan but I just wanted to get past 3.5 so I'm content.

Big Nuttz · 03-07-04, 11:05 PM

Quote:

Originally posted by Wam
Just to update those guys who replied. As in my sig, I managed to run it stabily at 262 FSB (3670Mhz) mem at 4:5. Would probably get a little more with a SP-94 and higher powered fan but I just wanted to get past 3.5 so I'm content.

Nice oc bro.

Wam · 03-08-04, 01:03 AM

Well coming from a phase change guy that's nice of you to say.

It's a nice difference over my old 2.53 at 3.4. I was also going from single memory to dual so in tandem with the HT and higher FSB plus increased bandwidth I got quite a boost in overall performance.

I can now encode and do other things on the PC while this is going on.

$anch3z · 03-08-04, 10:30 AM

second that nice oc wam ...and was it an m0 or not?

Wam · 03-08-04, 10:43 AM

Cheers. No this turned out to be a SL6WF. A guy was selling an m0 that went to 3.78 on H20 but he wanted too much for it. I only had to put £10 ($18) on top after selling my 2.53 so this worked out really good.

02-24-04, 07:12 PM	Thread Starter #1
Wam Member Join Date: Jan 2001 Location: U.K	What will a 2.8C at 3.8 in a Vapo do on good air cooling I'm thinking of buy one of a guy that used to have a 2.8C SL6WF at 3.8 in a Vapo. For you guys in the know can you give me a rough idea what to expect to get with SLK900-u etc.
	QUOTE Thanks

02-25-04, 07:41 AM	#3
flapperhead Senior Member Join Date: Apr 2002 Location: wash dc area	my understanding is, u get 200-300mhz with a vapochill
	QUOTE Thanks

02-25-04, 09:39 AM	Thread Starter #4
Wam Member Join Date: Jan 2001 Location: U.K	Thanks guys, that pretty much backs up what I'm thinking. If I get it I'll post back here to confirm and see Silversinksam's crystal ball need cleaning or not.
	QUOTE Thanks

02-25-04, 12:45 PM	#5
$anch3z Member Join Date: Nov 2003 Location: UK Plymouth	see if you can find a SL6Z5 imo they are rockets mine done 3.6 straight out of the box and now seem to have gained another 30 mhz over time @ 3631 now..... you gotta consider what volts he had running through it to get that speed to
	QUOTE Thanks

02-25-04, 06:23 PM	Thread Starter #6
Wam Member Join Date: Jan 2001 Location: U.K	I'm actually getting another one now that did 3.8 in a Vapo but I don't know what the stepping is or what V's he used but I'll find out. I've just sold the CPU in my sig so as long as I get 3.4+ I won't mind but SL6Z5 would be nice but unlikely. Last edited by Wam; 02-25-04 at 07:12 PM.
	QUOTE Thanks

What will a 2.8C at 3.8 in a Vapo do on good air cooling

Internet Services

Website Development

Tech Hardware

02-25-04, 07:02 PM	#7
AudiMan Member Join Date: Jan 2002 Location: Winnipeg	My 2.8 (SL6Z5) did 3.7ish on air (SLK-900) and now it's doing 3.8 in my prommy with slightly higher voltages. (If anyone cares, I'm using a P4C800-E DX and Mushkin Lev. II) I didn't even gain 50 MHz.
	QUOTE Thanks

02-26-04, 08:11 PM	Thread Starter #8
Wam Member Join Date: Jan 2001 Location: U.K	He says that it was doing 3.8 in the Vapo on default voltage. That sounds like a good omen but we will soon find out. Also just digressing a little, if I run at 250FSB then the mem will be at 200 which means I will be able to enable PAT fully. Is this correct. How much performance benefit is there from PAT? I take it there's still no way to enable PAT after 200FSB unless you're running 1:1? Last edited by Wam; 02-26-04 at 08:26 PM.
	QUOTE Thanks

03-07-04, 03:43 PM	Thread Starter #9
Wam Member Join Date: Jan 2001 Location: U.K	Just to update those guys who replied. As in my sig, I managed to run it stabily at 262 FSB (3670Mhz) mem at 4:5. Would probably get a little more with a SP-94 and higher powered fan but I just wanted to get past 3.5 so I'm content.
	QUOTE Thanks

03-08-04, 01:03 AM	Thread Starter #11
Wam Member Join Date: Jan 2001 Location: U.K	Well coming from a phase change guy that's nice of you to say. It's a nice difference over my old 2.53 at 3.4. I was also going from single memory to dual so in tandem with the HT and higher FSB plus increased bandwidth I got quite a boost in overall performance. I can now encode and do other things on the PC while this is going on.
	QUOTE Thanks

03-08-04, 10:30 AM	#12
$anch3z Member Join Date: Nov 2003 Location: UK Plymouth	second that nice oc wam ...and was it an m0 or not?
	QUOTE Thanks

03-08-04, 10:43 AM	Thread Starter #13
Wam Member Join Date: Jan 2001 Location: U.K	Cheers. No this turned out to be a SL6WF. A guy was selling an m0 that went to 3.78 on H20 but he wanted too much for it. I only had to put £10 ($18) on top after selling my 2.53 so this worked out really good.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search