Water coolin my GPU Finally ^^

DarkDraco · 03-17-04, 04:16 PM

i finally took the time and ordered a dangerden maze4 GPU block and so far i love it!

my setup is rez > pump > rad > cpu > gpu

and the cpu temp has only risen slightly.

my old idle/load temps were 40-41/48-49 now they are 44-46/49-51.

i have to say that i am impressed with my setups performance.

at stock cooling my redeon core OC was around 405-410 with minimum artifacts, now its up to 430 with ever fewer barely noticible artifacts. (a couple white dots here and there every once in a while)

solo · 03-17-04, 05:15 PM

nice, but your overclock seems a little bit low

mine on air can do 460/410 with no artifacts
but i slapped an AMD CPU hsf and have vmods, but that is ok

go get a vmod and bump that core higher

great job on the wc job tho

DarkDraco · 03-17-04, 08:38 PM

how exactly do i go about finding a vmod for my card? in my NT7 r2 bios settings there is an option for some sort of similar option.

03-17-04, 04:16 PM	Thread Starter #1
DarkDraco Member Join Date: Aug 2003	Water coolin my GPU Finally ^^ i finally took the time and ordered a dangerden maze4 GPU block and so far i love it! my setup is rez > pump > rad > cpu > gpu and the cpu temp has only risen slightly. my old idle/load temps were 40-41/48-49 now they are 44-46/49-51. i have to say that i am impressed with my setups performance. at stock cooling my redeon core OC was around 405-410 with minimum artifacts, now its up to 430 with ever fewer barely noticible artifacts. (a couple white dots here and there every once in a while) __________________ Main Rig: Asus Crosshair Formula II AMD Phenom 9850 2.5GHz Quad Core(---x-=---mhz) 2x PNY 9800 GX2 Quad SLI 1GB 512bit(---x-=---mhz) 2x 2GB OCZ Platinum DDR2 1066 (PC2 8500) 2x 250GB Barracuda 7200.10 3gb/s HDD ZALMAN ZM850-HP 850W Continuous / 1050W Peak PSU
	QUOTE Thanks

03-17-04, 05:15 PM	#2
solo Member Join Date: Apr 2003	nice, but your overclock seems a little bit low mine on air can do 460/410 with no artifacts but i slapped an AMD CPU hsf and have vmods, but that is ok go get a vmod and bump that core higher great job on the wc job tho __________________ rar
	QUOTE Thanks

03-17-04, 08:38 PM	Thread Starter #3
DarkDraco Member Join Date: Aug 2003	how exactly do i go about finding a vmod for my card? in my NT7 r2 bios settings there is an option for some sort of similar option. __________________ Main Rig: Asus Crosshair Formula II AMD Phenom 9850 2.5GHz Quad Core(---x-=---mhz) 2x PNY 9800 GX2 Quad SLI 1GB 512bit(---x-=---mhz) 2x 2GB OCZ Platinum DDR2 1066 (PC2 8500) 2x 250GB Barracuda 7200.10 3gb/s HDD ZALMAN ZM850-HP 850W Continuous / 1050W Peak PSU
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Water coolin my GPU Finally ^^

Internet Services

Website Development

Tech Hardware