overclocking a xp3000+

hi, i am overclocking a xp3000+

axda 3000kv4d
aqzea0325mpmw

i have only managed a fsb at 181 stable run,

i have bought a speed-strip, but it dont seem to work

what i want to do is to get to a 400fsb run and maybe more than that. someone here able to help me out on this?

system specs

Msi delta nforce 2 ilsr
amd xp 3000+ 333fsb
2x twinmos 512 pc 3200
r9700pro hercules
audigy2

ok first of Welcome To The Forum !

stock the 3000 is 13x166=2160Mhz , right now your at 13x181=2353Mhz , and what you want 13x200=2600Mhz which is alil high for a barton <~~~ thats if you have not changed your multi yet

what you can do is try lowering the multi to say 11x200=2200Mhz , 11.5x200=2300Mhz , or 12x200=2400

one thing to what are your temps like (idle/load) and whats your Vcore

it wont let me to lower the multiplier, after i put it to 11x the screen drops black and i have to do that fsb jumber thingy under the northbridge cooler.

the vcore was not adjusted it was at h/w i think.

i dont understand this, i have the speed-strip and i am useing it with the cpu, i cant decrease the multiplier, if i do the screen goes black before the posting and i have to remove the powercord for a few secounds.