Can I run 1 SATA drive and 1 IDE drive concurrently?

MadInsane · 04-08-04, 07:55 PM

Hey guys, i just ordered a DFI infinity to replace my POS msi nforce2. I am going to get a WD 250gb sata drive, can i take this drive and run it at the same time with my ide 120 gb WD drive? Will it cause any problems? ALSO, Do i have to do a windows format when replacing my dfi with my msi mobo, or just uninstall drivers and reinstall? Thanks!!

computerbias · 04-08-04, 08:07 PM

reformat, windows is registered against your board to prevent piracy and fraud.

try running the sata and ide, I tried it in my abit, however it didn't work, but that was because the sata converter I was using was bust, when I replaced it, I got 2 so I never tried it again, but I would come to believe that it should be fine.

Sony · 04-08-04, 08:08 PM

Quote:

Originally posted by MadInsane
Hey guys, i just ordered a DFI infinity to replace my POS msi nforce2. I am going to get a WD 250gb sata drive, can i take this drive and run it at the same time with my ide 120 gb WD drive? Will it cause any problems? ALSO, Do i have to do a windows format when replacing my dfi with my msi mobo, or just uninstall drivers and reinstall? Thanks!!

ALWAYS reformat when installing a new motherboard of a different model. It doesn't have to do with drivers, windows gets to know your motherboard and how to get around in it when you change motherboards without reformatting it confuses Windows or any operating system for that matter. Also Yes you should be able to run you SATA HDD at the same time as your IDE one.

MadInsane · 04-08-04, 08:17 PM

thanks again!!!

julianba · 04-09-04, 05:56 PM

Ya you can do it.

I just installed my 36gb sata wd raptor alongside my old 30 gb wd ide drive. The only thing you have to do is disable the ide primary master in the bios, or the system will boot from the old windows installation. The old drive works as a slave now.

04-08-04, 07:55 PM	Thread Starter #1
MadInsane Member Join Date: Mar 2004 Location: Happy Land	Can I run 1 SATA drive and 1 IDE drive concurrently? Hey guys, i just ordered a DFI infinity to replace my POS msi nforce2. I am going to get a WD 250gb sata drive, can i take this drive and run it at the same time with my ide 120 gb WD drive? Will it cause any problems? ALSO, Do i have to do a windows format when replacing my dfi with my msi mobo, or just uninstall drivers and reinstall? Thanks!!
	QUOTE Thanks

04-08-04, 08:07 PM	#2
computerbias Member Join Date: Oct 2003 Location: Michigan	reformat, windows is registered against your board to prevent piracy and fraud. try running the sata and ide, I tried it in my abit, however it didn't work, but that was because the sata converter I was using was bust, when I replaced it, I got 2 so I never tried it again, but I would come to believe that it should be fine.
	QUOTE Thanks

04-08-04, 08:17 PM	Thread Starter #4
MadInsane Member Join Date: Mar 2004 Location: Happy Land	thanks again!!! __________________ CatLeap 2703 27" 2560 x 1440 S-IPS Super Increbile Trippy Colors Monitor (w/ only 1 stuck px ;) i5 2500k @ 4.5ghz, Corsair A70 Cooler G.Skill 16GB ddr3-1600 Asus p67 Pro Mobo Asus GTX 680 + eVGA GTX 680 Corsair Force3 120ssd WD 1TB x 2 RAID-0 Antec 902 Gaming Case
	QUOTE Thanks

04-09-04, 05:56 PM	#5
julianba Member Join Date: Jul 2003 Location: NJ,USA	Ya you can do it. I just installed my 36gb sata wd raptor alongside my old 30 gb wd ide drive. The only thing you have to do is disable the ide primary master in the bios, or the system will boot from the old windows installation. The old drive works as a slave now.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Can I run 1 SATA drive and 1 IDE drive concurrently?

Internet Services

Website Development

Tech Hardware