- Joined
- Apr 9, 2004
- Location
- Georgia
Need to know the state my MB needs to be at for best OC. This is my current settings....
In Advance Chipset Setting:
· Configure DRAM Timing SPD change from Enable to Disable
· Cas Latency: 2.5
· Ras Precharge: 3
· Ras to Cas Delay: 3
· Ras Active to Precharge: 8
· DRAM burst Length: 8 Clocks
In Advance go to Jumper Free Configuration then go to Configure System Frequency/Voltage then AI Overclock.
· Turn from Standard to Manual
· CPU External Frequency needs to change to 200MHz
· DRAM Frequency: 400
· AGP/PCI Frequency (MHz): Auto
· CPU Vcore Voltage: Auto
· DDR Reference Voltage: 2.65
· AGP VDDQ 1.25
Performance Mode: Auto
In Advance Chipset Setting:
· Configure DRAM Timing SPD change from Enable to Disable
· Cas Latency: 2.5
· Ras Precharge: 3
· Ras to Cas Delay: 3
· Ras Active to Precharge: 8
· DRAM burst Length: 8 Clocks
In Advance go to Jumper Free Configuration then go to Configure System Frequency/Voltage then AI Overclock.
· Turn from Standard to Manual
· CPU External Frequency needs to change to 200MHz
· DRAM Frequency: 400
· AGP/PCI Frequency (MHz): Auto
· CPU Vcore Voltage: Auto
· DDR Reference Voltage: 2.65
· AGP VDDQ 1.25
Performance Mode: Auto