YAY! My stuff is here

InvisGreenMan · 04-12-04, 11:52 PM

I just got my BIX, (2) 120mm Panaflo MA1s (38mm thick ones) and my swiftech MCP600 in the mail! Now I need to finish up machining my waterblock, and get my PSU RMAed.

Just found out that it is dying, and is hobbling on its last leg.

Also built a rheostat adjuster for the fans so I can adjust them according to load. (really helping out the tornado for temporary use)

VeiL0 · 04-13-04, 01:46 AM

That's some awesome stuff especially the MCP600 pump

Just wondering what PSU was it and where did you order this stuff from? CrazyPC?

InvisGreenMan · 04-15-04, 12:33 AM

I got it all from FrozenCPU.com, and the PSU is a Fortron 530W. I think I am going to get an Antec 550 to replace it.

noxipoo · 04-15-04, 12:35 AM

why replace the Fortron? I'd think thats better than Antec

VeiL0 · 04-15-04, 12:52 AM

Isn't the 12V rail pretty low on the Fortron..I think it was rated at 18A which I think is pretty low for a 500 watt PSU. That's as much as the 400's are putting out. Plus for an overclocked system 18V on the 12v is almost deadly.

04-12-04, 11:52 PM	Thread Starter #1
InvisGreenMan Member Join Date: Jan 2004 Location: South Dakota	YAY! My stuff is here I just got my BIX, (2) 120mm Panaflo MA1s (38mm thick ones) and my swiftech MCP600 in the mail! Now I need to finish up machining my waterblock, and get my PSU RMAed. Just found out that it is dying, and is hobbling on its last leg. Also built a rheostat adjuster for the fans so I can adjust them according to load. (really helping out the tornado for temporary use)
	QUOTE Thanks

04-13-04, 01:46 AM	#2
VeiL0 Member Join Date: Mar 2004 Location: Los Angeles, CA	That's some awesome stuff especially the MCP600 pump Just wondering what PSU was it and where did you order this stuff from? CrazyPC?
	QUOTE Thanks

04-15-04, 12:33 AM	Thread Starter #3
InvisGreenMan Member Join Date: Jan 2004 Location: South Dakota	I got it all from FrozenCPU.com, and the PSU is a Fortron 530W. I think I am going to get an Antec 550 to replace it.
	QUOTE Thanks

04-15-04, 12:35 AM	#4
noxipoo Member Join Date: Mar 2004 Location: Da Bears	why replace the Fortron? I'd think thats better than Antec __________________ human male body overclocked to well over 5'! powered by liquid and solid fuel cooled by water and solid coolant with coolant disposal unit attachements
	QUOTE Thanks

04-15-04, 12:52 AM	#5
VeiL0 Member Join Date: Mar 2004 Location: Los Angeles, CA	Isn't the 12V rail pretty low on the Fortron..I think it was rated at 18A which I think is pretty low for a 500 watt PSU. That's as much as the 400's are putting out. Plus for an overclocked system 18V on the 12v is almost deadly.
	QUOTE Thanks

YAY! My stuff is here

Internet Services

Website Development

Tech Hardware

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search