Free low tech stuff (heatsink and nic card)

hafaphoto · 04-17-04, 09:38 PM

I have a Thermaltake Volcano 6 Cu and a LinkSys Nic card anyone can have if they can use either of them. You just need to pay the shipping. PM me if either of these can help you with folding.

E

matrixzen · 04-17-04, 11:14 PM

I currently have no need for a heatsink or network card at the moment.

I'm sure someone else can use one of these for another folding box.

Lan_Of_Malkier · 04-18-04, 12:27 AM

YGPM

Posidon42 · 04-18-04, 08:19 AM

is the volcano 6 any better than a stock heatsink for the 2500+ series?

Mr.Radar · 04-18-04, 09:28 AM

I don't think so. the V-6 was designed before the 2500+ and according to the review at OC'ers.com it doesn't do too much better than the stock heatsink they reviewed.

Quailane · 04-18-04, 04:28 PM

Ooooh, is the heatsink gone?

hafaphoto · 04-18-04, 08:34 PM

The heatsink runs about a degree or so higher than the stock AMD 2500 heatsink, so no, it is not better. It was given to me, and I was hoping to give it to someone with an older machine that it might help a little (folding I hope).

Fold on!

E

ShadowCat66 · 04-19-04, 07:35 AM

I was running the V-6 and the V-6+'s on my farms up to XP2400's and they ran them with a mild overclock just fine.Of course that was in an open board with no case but, they did run slightly cooler than they're stock counterparts.The ceramque seemed to work just slightly better than the AS3 I was using at the time with a lapping job.

EDIT: I was going to post in the classifieds for 2 SK- 7's for 5 a piece plus shipping.They where almost as good as the SLK 800's.I was using them on a dually XP2400 system for awhile.

http://www.frostytech.com/articlevie...eID=1514<br />

http://www.overclockers.com/articles630/

hafaphoto · 04-19-04, 09:10 PM

Hey Shadowcat! This is your old heatsink! I got it from you a while back. I guess I am going for a more aggressive O/C, but my temps are slightly better with the stock one.

Since you gave it to me, I thought I would do the same and try to help someone out! I messed up and used some cheaper paste instead of the Arctic Silver. It is in no way a bad heatsink, but I just got a degree or so better performance with the stock one with my setup.

Hopefully, I can give it to someone who can use it! I just have it laying around!

Fold on!!

E

hafaphoto · 04-20-04, 10:53 PM

The heatsink is going to Quailane. If anyone can use the nic card, PM me.

E

04-17-04, 09:38 PM	Thread Starter #1
hafaphoto Member Join Date: Nov 2003 Location: Louisiana	Free low tech stuff (heatsink and nic card) I have a Thermaltake Volcano 6 Cu and a LinkSys Nic card anyone can have if they can use either of them. You just need to pay the shipping. PM me if either of these can help you with folding. E __________________ Gigabyte GA-P35-D , Intel Q6600 @ 3.somethingGHz.
	QUOTE Thanks

04-17-04, 11:14 PM	#2
matrixzen Member Join Date: Jun 2003 Location: CA	I currently have no need for a heatsink or network card at the moment. I'm sure someone else can use one of these for another folding box. __________________ Team 32 Contributor.
	QUOTE Thanks

04-18-04, 12:27 AM	#3
Lan_Of_Malkier Member Join Date: Jan 2004 Location: Wasilla, Alaska	YGPM
	QUOTE Thanks

04-18-04, 08:19 AM	#4
Posidon42 Member Join Date: Jun 2003	is the volcano 6 any better than a stock heatsink for the 2500+ series?
	QUOTE Thanks

04-18-04, 09:28 AM	#5
Mr.Radar Member Join Date: Dec 2003 Location: Currently on a silent vacation from overclocking.	I don't think so. the V-6 was designed before the 2500+ and according to the review at OC'ers.com it doesn't do too much better than the stock heatsink they reviewed.
	QUOTE Thanks

Free low tech stuff (heatsink and nic card)

Internet Services

Website Development

Tech Hardware

04-18-04, 04:28 PM	#6
Quailane Member Join Date: Oct 2003 Location: Who stole my white stars?	Ooooh, is the heatsink gone? __________________ I DRIVE A HYUNDAI AND I'M PROUD OF IT!
	QUOTE Thanks

04-18-04, 08:34 PM	Thread Starter #7
hafaphoto Member Join Date: Nov 2003 Location: Louisiana	Heatsink The heatsink runs about a degree or so higher than the stock AMD 2500 heatsink, so no, it is not better. It was given to me, and I was hoping to give it to someone with an older machine that it might help a little (folding I hope). Fold on! E __________________ Gigabyte GA-P35-D , Intel Q6600 @ 3.somethingGHz.
	QUOTE Thanks

04-19-04, 07:35 AM	#8
ShadowCat66 Member Join Date: Aug 2001 Location: Oshkosh,WI	I was running the V-6 and the V-6+'s on my farms up to XP2400's and they ran them with a mild overclock just fine.Of course that was in an open board with no case but, they did run slightly cooler than they're stock counterparts.The ceramque seemed to work just slightly better than the AS3 I was using at the time with a lapping job. EDIT: I was going to post in the classifieds for 2 SK- 7's for 5 a piece plus shipping.They where almost as good as the SLK 800's.I was using them on a dually XP2400 system for awhile. http://www.frostytech.com/articlevie...eID=1514<br /> http://www.overclockers.com/articles630/ Last edited by ShadowCat66; 04-19-04 at 07:54 AM.
	QUOTE Thanks

04-19-04, 09:10 PM	Thread Starter #9
hafaphoto Member Join Date: Nov 2003 Location: Louisiana	Heatsink Hey Shadowcat! This is your old heatsink! I got it from you a while back. I guess I am going for a more aggressive O/C, but my temps are slightly better with the stock one. Since you gave it to me, I thought I would do the same and try to help someone out! I messed up and used some cheaper paste instead of the Arctic Silver. It is in no way a bad heatsink, but I just got a degree or so better performance with the stock one with my setup. Hopefully, I can give it to someone who can use it! I just have it laying around! Fold on!! E __________________ Gigabyte GA-P35-D , Intel Q6600 @ 3.somethingGHz.
	QUOTE Thanks

04-20-04, 10:53 PM	Thread Starter #10
hafaphoto Member Join Date: Nov 2003 Location: Louisiana	Stuff The heatsink is going to Quailane. If anyone can use the nic card, PM me. E __________________ Gigabyte GA-P35-D , Intel Q6600 @ 3.somethingGHz.
	QUOTE Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search