Notices

Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

L35 Hydor

Post Reply New Thread Subscribe Search this Thread
 
 
Thread Tools
Old 04-21-04, 08:35 AM Thread Starter   #1
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
L35 Hydor Arrived pics and stuff inside


Has anyone gotten ahold of one of these yet?

let me quote my email from today so you get an idea what im talking about

Quote:
Depending on your system needs, you may want to try one of our new pumps; L25 or the L35. The new series of pumps feature new impellers and lower wattages. The new L25 ($39.95) uses 10W of power with 265 GPH output. The L25 body is smaller than the L30, but the hose connectors are the same. The new L35 ($59.95) uses 23W with 450 GPH output in the same body and hose connector size. I have tested both pumps and found them to be quiet and powerful. Both pumps will be hitting the PC cooling market very soon.

Last edited by thorilan; 04-29-04 at 06:20 AM.
thorilan is offline   QUOTE Thanks
Old 04-21-04, 10:56 AM   #2
The Doors
Vesuvius Senior Ocer

 
The Doors's Avatar 

Join Date: Jan 2001
Location: Athens - Greece

10 Year Badge
 
I've right now sent an E-Mail to Hydor in Italy asking Infos about the new Pumps, I'll let you know.

Adriano

__________________
i7-920 @ 3.57Ghz 1.28v
Gigabyte GA-EX58-UD4 F10
6Gb Walton Chaintech 1600Mhz 7-7-7-18-1T
Noctua NH-U12P Push/Pull
Radeon HD4850 512Mb @ 700/1150Mhz MUSASHI cooled
2 Intel X25-V 40Gb in Raid0
2 Barracuda 500Gb in Raid1 + Maxtor 320Gb
SilverStone OP-1KW
U2-UFO Case cooled by ~750Cfm!
W7 Ultimate 64Bit
The Doors is offline   QUOTE Thanks
Old 04-21-04, 11:09 AM Thread Starter   #3
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
im hoping to have one then before you get your info =)

__________________
697+ water coolled systems built , 0 leaks
thorilan is offline   QUOTE Thanks
Old 04-21-04, 11:54 AM Thread Starter   #4
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
just got an email from him saying it will ship at the end of this week =)

__________________
697+ water coolled systems built , 0 leaks
thorilan is offline   QUOTE Thanks
Old 04-21-04, 12:14 PM   #5
slater3333uk
Member

 
slater3333uk's Avatar 

Join Date: Dec 2002
Location: Suffolk, UK

 
Specs?? head/pressure? graphs? pic? anything?
slater3333uk is offline   QUOTE Thanks
Old 04-21-04, 12:51 PM Thread Starter   #6
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
dude i havent got it yet and it hasnt been released to public
afaik

just gonna have to wait

__________________
697+ water coolled systems built , 0 leaks
thorilan is offline   QUOTE Thanks
Old 04-21-04, 02:39 PM   #7
Shadowcat
Member

 
Shadowcat's Avatar 

Join Date: Dec 2003
Location: Suffolk, UK

 
L35 sounds sweet... any new Hydor should be awesome...
Shadowcat is offline   QUOTE Thanks
Old 04-21-04, 03:08 PM   #8
ILikeMy240sx
Member

 
ILikeMy240sx's Avatar 

Join Date: Sep 2003
Location: University of Michigan

 
nice wattage rating for 450GPH if the head pressure is higher or close to Mag3 or MCP600 then it might actually be a nice pump.
ILikeMy240sx is offline   QUOTE Thanks
Old 04-21-04, 03:21 PM   #9
9mmCensor
Disabled



Join Date: Oct 2003
Location: Banned Camp

 
9mmCensor is offline   QUOTE Thanks
Old 04-21-04, 03:24 PM   #10
ILikeMy240sx
Member

 
ILikeMy240sx's Avatar 

Join Date: Sep 2003
Location: University of Michigan

 
Too bad it's the same head heigh as L30 tho... but nice nevertheless. IMO, a bit pricey...
ILikeMy240sx is offline   QUOTE Thanks
Old 04-21-04, 04:35 PM   #11
VeiL0
Member

 
VeiL0's Avatar 

Join Date: Mar 2004
Location: Los Angeles, CA

 
Even though it's a bit pricey the specs are gonna be worth it plus Hydor is a pretty good brand. I wouldn't mind paying that much if I know the quality is at least somewhat decent.
VeiL0 is offline   QUOTE Thanks
Old 04-26-04, 03:44 AM   #12
The Doors
Vesuvius Senior Ocer

 
The Doors's Avatar 

Join Date: Jan 2001
Location: Athens - Greece

10 Year Badge
 
Thorilan please let us know the results/impressions about, in any way, these pumps are available worldwide since two months as reported by Hydor.
Personally I'm thinking to use the L35 as base of my WC project.

Adriano

__________________
i7-920 @ 3.57Ghz 1.28v
Gigabyte GA-EX58-UD4 F10
6Gb Walton Chaintech 1600Mhz 7-7-7-18-1T
Noctua NH-U12P Push/Pull
Radeon HD4850 512Mb @ 700/1150Mhz MUSASHI cooled
2 Intel X25-V 40Gb in Raid0
2 Barracuda 500Gb in Raid1 + Maxtor 320Gb
SilverStone OP-1KW
U2-UFO Case cooled by ~750Cfm!
W7 Ultimate 64Bit
The Doors is offline   QUOTE Thanks
Old 04-26-04, 05:58 AM   #13
The Big One
Member

 
The Big One's Avatar 

Join Date: Dec 2003
Location: Israel

 
looks sweet, but i think the L45 is sweeter

__________________
opteron 165 @ Scythe ninja | A-DATA 512 500 * 2 |DFI RS482 | 2600xt @ s1 rev2 | 3* WD5000AAKS | nec 3520A @ 1.UF | VX450W | antec P180 | creative 2 zs platinium

בדק בית,ליקויי בניה,בדיקת קרינה ,Cell Phone
The Big One is offline   QUOTE Thanks
Old 04-26-04, 07:10 AM   #14
ILikeMy240sx
Member

 
ILikeMy240sx's Avatar 

Join Date: Sep 2003
Location: University of Michigan

 
Quote:
Originally posted by VeiL0
Even though it's a bit pricey the specs are gonna be worth it plus Hydor is a pretty good brand. I wouldn't mind paying that much if I know the quality is at least somewhat decent.
if I could afford that pump.... I would add a little more and get a MCP600 instead
ILikeMy240sx is offline   QUOTE Thanks
Old 04-26-04, 10:18 AM   #15
slater3333uk
Member

 
slater3333uk's Avatar 

Join Date: Dec 2002
Location: Suffolk, UK

 
Humm not very exiting. Would predict simlar performance to the L30. Having a bigger flow but same head could attualy make it worse. (like danner mag3 vs mag5) maybe the lower wattage will make up for it.
slater3333uk is offline   QUOTE Thanks
Old 04-26-04, 03:34 PM   #16
JDizzle
Member

 
JDizzle's Avatar 

Join Date: Jan 2004
Location: Houston, Tx

 
Any word on this pump?

__________________

Intel E6400 @ 3.2GHZ (1.36v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
JDizzle is offline   QUOTE Thanks
Old 04-26-04, 05:25 PM Thread Starter   #17
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
should be reciving it this week . since there are no hydor distributors in japan the shipping has to come from america which btw is costing me more than the actual pump

__________________
697+ water coolled systems built , 0 leaks
thorilan is offline   QUOTE Thanks
Old 04-28-04, 09:34 PM Thread Starter   #18
thorilan
Member

 
thorilan's Avatar 

Join Date: May 2002
Location: Japan/Daytona Beach

 
im definately gonna need to have someone host some pics. you are gonna wanna see this
!!!!!!

__________________
697+ water coolled systems built , 0 leaks
thorilan is offline   QUOTE Thanks
Old 04-28-04, 11:53 PM   #19
JDizzle
Member

 
JDizzle's Avatar 

Join Date: Jan 2004
Location: Houston, Tx

 
I wanna see....get hosting!

__________________

Intel E6400 @ 3.2GHZ (1.36v) - Freezer Pro 7
Gigabyte DS3 C1 F8i
2GB G. Skill PK @ 400mhz 1:1 (4-4-4-12)
Asus EN6200 8 pipes enabled
250GB Hitachi T7K250
Fortron Blue Storm 500W
Antec P180
JDizzle is offline   QUOTE Thanks
Old 04-29-04, 12:35 AM   #20
VeiL0
Member

 
VeiL0's Avatar 

Join Date: Mar 2004
Location: Los Angeles, CA

 
Same here! Wanna see that badboy in action...plus its practicality as well.
VeiL0 is offline   QUOTE Thanks

Post Reply New Thread Subscribe


Overclockers Forums > Hardware > Cooling > Water Cooling
Water Cooling Discussion devoted to blocks, pumps, radiators, reservoirs, tubing, and everything else to get you running smooth on a water loop
Forum Jump

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Mobile Skin
All times are GMT -5. The time now is 12:42 PM.
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
You can add these icons by updating your profile information to include your Heatware ID, Benching Profile ID or your Folding/SETI profile ID. Edit your profile!
X

Welcome to Overclockers.com

Create your username to jump into the discussion!

New members like you have made this the best community on the Internet since 1998!


(4 digit year)

Why Join Us?

  • Share experience
  • Max out your hardware
  • Best forum members anywhere
  • Customized forum experience

Already a member?