Iwill +amd 1.4

I have a iwill kk266 motherboard and amd 1/4 gig 266 fsb processor. how ever when i setup the system the bios says that the cpu is running 1056 mhz. after checking the bios setings the voltage settings and so such are set to auto.

So here is my question what should the settings be for a 1.4 gig. i just want to the cpu t run at the correct speed and then i will start turn up the speed. ( P.S the cpu is not unlocked at the moment)

Some f you may think that this is lame but i have nuke two processors in the last two month. so i want to double check what i am doing before tring and thing.

If their is not enogth info then ask and i will post more up.

There's a FSB select jumper on the board for 100 or 133 FSB. If you jump pins 1 & 2, it sets the FSB to 100MHz...pins 2 & 3 set the FSB to 133MHz. Make sure you have it set for 133 FSB and not 100 (which is the default setting).

Ill check that out !

Thanks redduc900