- Joined
- Apr 19, 2003
Basically.. here's the run down:
I have a g191C LCD I got from ebay, and I'm kind of stuck with it at this point. It's a seiko and here is the manual:
http://www.seiko-usa-ecd.com/lcd/products/graphic_mods/pdf/g191c-e.pdf
My friend is an electronics nerd, a nd he said he'd be the one to help me...
He said something about it interfacing via 3-wire serial or something, basically he needs more help just on what *he* needs to do. He can make a converter or interface probably quiet easy.. but blah. Also, I can write with him interfacing software with some help. I really don't want to give up,
Where can I find an inverter to power this thing as well?
Some resources/posts I found about this that may help:
http://www.zworld.com/documentation/docs/refs/TN108.pdf
http://www.siielectroniccomponents.com/lcd/products/graphic_mods/pdf/g191c.pdf
http://www.seiko-usa-ecd.com/lcd/products/graphic_mods/inv_selection.html
a
^^ has the inverter I need, I need to know where to get this/how to build...
http://www.sii.co.jp/compo/catalog_e/lcd_e.pdf
^more summary info on the g191C as well as atiny shot of it in action.
http://www.eio.com/public/lcd.1998/0227.html
This guy made a post about thier company having a controller, also in teh same board about a controller that works with the g191C, I don't understand what controller they mean, and his site is 404 but someone else m ight know...
http://www.eio.com/public/lcd.1998/0227.html
Someone asking about interfacing with a controller...
Someone from another forum made this comment:
I need to know how to Interface this with the PC, I don't really hopefully need DETAILED information,b ut just a quick rundown since my electronics firned would probably be able to help me easily with technical stuff. Basically I need this to be done by 4 pm on friday, which is kinda a strech. I really would like help, I can always write the software myself for controlling it I just need mainly the interfacing with a serial port etc.
Thanks,
-Excelsior
I have a g191C LCD I got from ebay, and I'm kind of stuck with it at this point. It's a seiko and here is the manual:
http://www.seiko-usa-ecd.com/lcd/products/graphic_mods/pdf/g191c-e.pdf
My friend is an electronics nerd, a nd he said he'd be the one to help me...
He said something about it interfacing via 3-wire serial or something, basically he needs more help just on what *he* needs to do. He can make a converter or interface probably quiet easy.. but blah. Also, I can write with him interfacing software with some help. I really don't want to give up,
Where can I find an inverter to power this thing as well?
Some resources/posts I found about this that may help:
http://www.zworld.com/documentation/docs/refs/TN108.pdf
http://www.siielectroniccomponents.com/lcd/products/graphic_mods/pdf/g191c.pdf
http://www.seiko-usa-ecd.com/lcd/products/graphic_mods/inv_selection.html
a
^^ has the inverter I need, I need to know where to get this/how to build...
http://www.sii.co.jp/compo/catalog_e/lcd_e.pdf
^more summary info on the g191C as well as atiny shot of it in action.
http://www.eio.com/public/lcd.1998/0227.html
This guy made a post about thier company having a controller, also in teh same board about a controller that works with the g191C, I don't understand what controller they mean, and his site is 404 but someone else m ight know...
http://www.eio.com/public/lcd.1998/0227.html
Someone asking about interfacing with a controller...
Someone from another forum made this comment:
Common driver (HITACHI HD61105)
A common driver (CD) is a CMOS IC with 80 drive outputs. The G191C has two CDs, whose
internal registers are connected each other.
means the lcd has 2 common drivers !?! and you would be able to interfacce the lcd. but i think there is no software supporting this lcd because the interfacing method is special comparing to lcds with "normal" common drivers.
I need to know how to Interface this with the PC, I don't really hopefully need DETAILED information,b ut just a quick rundown since my electronics firned would probably be able to help me easily with technical stuff. Basically I need this to be done by 4 pm on friday, which is kinda a strech. I really would like help, I can always write the software myself for controlling it I just need mainly the interfacing with a serial port etc.
Thanks,
-Excelsior
Last edited: